ASTM D 5871 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Benzene for Cyclohexane Feedstock
Hardcopy , PDF
25-10-2024
English
01-06-2017
1.1 This specification covers benzene for cyclohexane feedstock.
Committee |
D 16
|
DocumentType |
Standard
|
Pages |
2
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers benzene for cyclohexane feedstock.
1.2The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4Consult current OSHA regulations supplier’s Safety Data Sheets for all materials used in this specification.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 7011 : 2015 : R2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 4492 : 1998 | Standard Test Method for Analysis of Benzene by Gas Chromatography |
ASTM D 7183 : 2012 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 5713 : 2000 | Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography |
ASTM D 7504 : 2009 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 4017 : 1996 : REV A | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
ASTM D 7504 : 2015 : EDT 1 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 5713 : 2005 | Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography |
ASTM D 6875 : 2003 | Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
ASTM D 1685 : 2005 | Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry (Withdrawn 2009) |
ASTM D 4735 : 2002 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 8005 : 2018 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 7504 : 2015 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM E 2680 : 2016 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
ASTM D 7504 : 2016 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 3437 : 1999 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 5386 : 2004 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 4017 : 2002 : R2015 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
ASTM D 7504 : 2012 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 7183 : 2016 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 4735 : 2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 5713 : 2009 | Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography |
ASTM D 4017 : 1981 : R1987 : EDT 1 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
ASTM D 7183 : 2018 : REV A : EDT 1 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 7011 : 2010 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 7183 : 2018 : REV A | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 7183 : 2007 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 5713 : 2014 | Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography |
ASTM D 3437 : 2010 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 4492 : 2003 | Standard Test Method for Analysis of Benzene by Gas Chromatography |
ASTM E 2680 : 2009 : EDT 1 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
ASTM D 7504 : 2009 : EDT 1 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 7375 : 2008 | Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration (Withdrawn 2017) |
ASTM D 4735 : 2009 : R2014 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 7011 : 2015 : R2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 6875 : 2012 | Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
ASTM D 8005 : 2015 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 7504 : 2011 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 7011 : 2015 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 7504 : 2017 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 7011 : 2004 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM E 2680 : 2009 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
ASTM D 7183 : 2007 : EDT 1 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 4017 : 2002 : R2008 : EDT 1 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
ASTM D 5386 : 2005 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 6875 : 2008 | Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
ASTM E 2680 : 2009 : R2015 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
ASTM D 7504 : 2010 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 4492 : 2010 | Standard Test Method for Analysis of Benzene by Gas Chromatography (Withdrawn 2018) |
ASTM D 3437 : 2011 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 3437 : 2008 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 3437 : 2003 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 5386 : 1993 : REV B : R2000 : EDT 1 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 3437 : 2015 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 1685 : 2000 | Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry |
ASTM D 4017 : 1990 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
ASTM D 4017 : 2002 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
ASTM D 5386 : 2016 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 7011 : 2010 : REV A | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 6875 : 2018 | Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
ASTM D 4492 : 2007 | Standard Test Method for Analysis of Benzene by Gas Chromatography |
ASTM D 7183 : 2018 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 4735 : 2009 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 7183 : 2015 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 5386 : 2010 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 5713 : 2014 : R2018 : EDT 1 | Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography |
ASTM D 4735 : 1996 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 4735 : 2015 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 7504 : 2018 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 7504 : 2017 : REV A | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM E 2680 : 2009 : R2015 : EDT 1 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.