ASTM D 5617 : 2004 : R2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Multi-Axial Tension Test for Geosynthetics
Hardcopy , PDF
17-12-2023
English
05-06-2015
This test method covers the measurement of the out-of-plane response of geosynthetics to a force that is applied perpendicular to the initial plane of the sample.
Committee |
D 35
|
DocumentType |
Test Method
|
Pages |
5
|
ProductNote |
Reconfirmed 2015
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers the measurement of the out-of-plane response of geosynthetics to a force that is applied perpendicular to the initial plane of the sample.
1.2When the geosynthetic deforms to a prescribed geometric shape (arc of a sphere or ellipsoid) formulations are provided to convert the test data to biaxial tensile stress-strain values. These formulations cannot be used for other geometric shapes. With other geometric shapes, comparative data on deformation versus pressure is obtained.
1.3This test method is more commonly used to test geomembranes. Permeable materials may also be tested in conjunction with an impermeable material.
1.4This test method requires a large diameter pressure vessel (600 mm). Information obtained from this test method may be more appropriate for design purposes than many small scale index tests such as Test Method D6693 or Test Method D7003/D7003M.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 6455 : 2011 : R2018 | Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs) |
ASTM E 2777 : 2014 | Standard Guide for Vegetative (Green) Roof Systems |
ASTM D 7106/D7106M : 2005 : R2015 : EDT 1 | Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
ASTM D 6434 : 2012 : R2018 | Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes |
ASTM D 4439 : 2023 : REV B | Standard Terminology for Geosynthetics |
ASTM E 2777 : 2020 | Standard Guide for Vegetative (Green) Roof Systems |
ASTM D 7106/D7106M : 2005 : R2023 | Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
ASTM D 7003/D7003M : 2003 : R2021 | Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes |
ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
ASTM D 7003/D7003M : 2003 : R2013 : EDT 1 | Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes |
ASTM D 6693 : 2004 | Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes |
ASTM D 6693 : 2003 | Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes |
ASTM D 4439 : 2011 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2002 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2001 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2014 | Standard Terminology for Geosynthetics |
ASTM D 6693 : 2004 : R2010 | Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes |
ASTM D 4439 : 2023 : REV B | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2004 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2017-08 | TERMINOLOGY FOR GEOSYNTHETICS |
ASTM D 6693 : 2001 | Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes |
ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2023 | Standard Terminology for Geosynthetics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.