ASTM D 5498 : 2012 : REV A : R2018
Current
Current
The latest, up-to-date edition.
Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-08-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1.1 This guide is intended to assist those responsible for developing a program for the indoctrination and training of personnel performing coating and lining inspection work for nuclear facilities. 1.2 It is recognized that organizations and job responsibilities vary widely among utilities and also among various support and service companies. It is the responsibility of the user of this guide to identify the appropriate subject matter for its program and its specific needs. 1.3 Users of this guide must ensure that coating and lining work complies not only with this guide, but also with the licensee's plant-specific quality assurance program and licensing commitments. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 33
|
| DocumentType |
Guide
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide is intended to assist those responsible for developing a program for the indoctrination and training of personnel performing coating and lining inspection work for nuclear facilities.
1.2It is recognized that organizations and job responsibilities vary widely among utilities and also among various support and service companies. It is the responsibility of the user of this guide to identify the appropriate subject matter for its program and its specific needs.
1.3Users of this guide must ensure that coating and lining work complies not only with this guide, but also with the licensee's plant-specific quality assurance program and licensing commitments.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 5163 : 2016 | Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants |
| ASTM D 6132 : 2013 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
| ASTM F 1869 : 2009 | Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride |
| ASTM D 2240 : 2000 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1005 : 1995 : R2020 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 4787 : 2013 | Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates |
| ASTM D 4414 : 1995 : R2020 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
| ASTM F 1869 : 1998 | Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride |
| ASTM D 5162 : 2008 | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates |
| ASTM D 3276 : 2015 : EDT 1 | Standard Guide for Painting Inspectors (Metal Substrates) |
| ASTM D 5163 : 2005 : REV A | Standard Guide for Establishing Procedures to Monitor the Performance of Service Level I Coatings in an Operating Nuclear Power Plant |
| ASTM D 3363 : 2022 | Standard Test Method for Film Hardness by Pencil Test |
| ASTM D 4537 : 2004 : REV A | Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities |
| ASTM D 5144 : 2008 : R2016 | Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
| ASTM D 4138 : 2007 : REV A : R2022 | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
| ASTM D 3276 : 2021 | Standard Guide for Painting Inspectors (Metal Substrates) |
| ASTM D 4610 : 1998 : R2021 | Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings |
| ASTM D 4940 : 2010 | Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives |
| ASTM D 2583 : 2013 : REV A | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022) |
| ASTM D 3359 : 2009 : EDT 2 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 4787 : 2013 : R2018 | Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates |
| ASTM D 3363 : 2005 : R2011 : EDT 2 | Standard Test Method for Film Hardness by Pencil Test (Withdrawn 2020) |
| ASTM F 2170 : 2018 | Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes |
| ASTM F 2170 : 2016 | Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes |
| ASTM D 6386 : 2022 | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM D 4261 : 2005 : R2012 | Standard Practice for Surface Cleaning Concrete Masonry Units for Coating |
| ASTM D 7234 : 2005 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 4138 : 1994 : R2001 : EDT 1 | Standard Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means |
| ASTM D 4752 : 2010 | Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub |
| ASTM D 4541 : 2009 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 3843 : 2000 : R2008 | Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities |
| ASTM D 4538 : 2005 : EDT 1 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 6132 : 1997 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Over Concrete Using an Ultrasonic Gage |
| ASTM D 4787 : 1993 : R1999 | Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates |
| ASTM D 5162 : 2024 | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates |
| ASTM D 7682 : 2012 | Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty |
| ASTM D 4417 : 1993 : R1999 | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM D 4417 : 2011 | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM D 4538 : 2005 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 5402 : 2006 | Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs |
| ASTM D 3925 : 1981 : R1985 | Standard Practice for Sampling Liquid and Related Pigmented Coatings |
| ASTM D 4940 : 2015 : R2020 | Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives |
| ASTM F 2170 : 2016 : REV B | Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes |
| ASTM D 4261 : 2005 : R2018 | Standard Practice for Surface Cleaning Concrete Masonry Units for Coating |
| ASTM D 3276 : 2000 | Standard Guide for Painting Inspectors (Metal Substrates) |
| ASTM D 7682 : 2010 | Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty |
| ASTM F 1869 : 2010 | Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride |
| ASTM D 5162 : 2021 | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates |
| ASTM D 3925 : 1991 : R1996 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 4262 : 2005 : R2018 | Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces |
| ASTM F 1869 : 2016 | Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride |
| ASTM D 5162 : 2001 | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates |
| ASTM F 1869 : 2003 | Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride |
| ASTM D 4260 : 2005 | Standard Practice for Liquid and Gelled Acid Etching of Concrete |
| ASTM D 3843 : 2016 | Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities |
| ASTM F 1869 : 2004 | Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride |
| ASTM D 3843 : 2000 | Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities |
| ASTM D 3363 : 2000 | Standard Test Method for Film Hardness by Pencil Test |
| ASTM D 7091 : 2022 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 2240 : 2004 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM E 337 : 2015 : R2023 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM D 4262 : 1983 : R1999 | Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces |
| ASTM G 62 : 1987 : R1998 | Standard Test Methods for Holiday Detection in Pipeline Coatings |
| ASTM D 5144 : 2008 : EDT 1 | Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
| ASTM D 4752 : 2010 : R2015 | Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub |
| ASTM D 4138 : 2007 : REV A : R2013 | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
| ASTM D 2583 : 2006 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
| ASTM D 5163 : 2016 : R2021 | Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants |
| ASTM D 3359 : 1997 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM E 337 : 2015 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM D 4260 : 2023 | Standard Practice for Liquid and Gelled Acid Etching of Concrete |
| ASTM D 7234 : 2019 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 4538 : 2015 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 4541 : 2009 : EDT 1 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 6386 : 2016 : REV A | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM D 4417 : 2003 | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM D 3363 : 2005 | Standard Test Method for Film Hardness by Pencil Test |
| ASTM D 5163 : 2008 | Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants |
| ASTM D 4940 : 1998 | Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives |
| ASTM D 3363 : 2020 | Standard Test Method for Film Hardness by Pencil Test |
| ASTM F 2170 : 2016 : REV A | Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes |
| ASTM D 4285 : 1983 : R2018 | Standard Test Method for Indicating Oil or Water in Compressed Air |
| ASTM G 62 : 2022 | Standard Test Methods for Holiday Detection in Pipeline Coatings |
| ASTM D 1005 : 1995 : R2001 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 4752 : 1998 | Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub |
| ASTM D 6386 : 2016 | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM D 6386 : 1999 | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM D 16 : 2019 | Standard Terminology for Paint, Related Coatings, Materials, and Applications |
| ASTM D 7091 : 2020 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 2583 : 2013 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
| ASTM D 2240 : 2004 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 4259 : 1988 : R2006 | Standard Practice for Abrading Concrete |
| ASTM D 4537 : 2012 | Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities |
| ASTM D 4787 : 2024 | Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates |
| ASTM D 4258 : 2005 : R2017 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM D 4541 : 2002 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 6677 : 2007 | Standard Test Method for Evaluating Adhesion by Knife |
| ASTM G 62 : 2023 | Standard Test Methods for Holiday Detection of Coatings used to Protect Pipelines |
| ASTM D 4414 : 1995 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
| ASTM D 6237 : 2019 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM D 3359 : 2009 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 4537 : 2012 : R2018 | Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities |
| ASTM D 5402 : 2019 | Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs |
| ASTM D 6237 : 1998 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM D 5163 : 2016 | Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants |
| ASTM F 2170 : 2002 | Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using <bdit> in situ</bdit> Probes |
| ASTM D 7234 : 2012 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 3359 : 2022 | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 4260 : 1988 : R1999 | Standard Practice for Acid Etching Concrete |
| ASTM D 4259 : 2018 | Standard Practice for Preparation of Concrete by Abrasion Prior to Coating Application |
| ASTM D 4610 : 1998 : R2004 | Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings |
| ASTM D 4214 : 2023 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
| ASTM D 5163 : 2004 | Standard Guide for Establishing Procedures to Monitor the Performance of Service Level I Coatings in an Operating Nuclear Power Plant |
| ASTM D 4541 : 2017 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 3359 : 2002 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 4541 : 2022 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 3359 : 2009 : EDT 1 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 3363 : 2005 : R2011 : EDT 1 | Standard Test Method for Film Hardness by Pencil Test |
| ASTM D 5144 : 2000 | Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
| ASTM D 4214 : 1998 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films (Withdrawn 2007) |
| ASTM D 4537 : 2004 | Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities |
| ASTM D 3843 : 2016 : R2021 : EDT 1 | Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities |
| ASTM D 6132 : 2013 : R2017 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
| ASTM D 4259 : 1988 : R2012 | Standard Practice for Abrading Concrete |
| ASTM D 4285 : 2024 | Standard Practice for Indicating Oil or Water in Compressed Air |
| ASTM D 4263 : 2024 | Standard Practice for Indicating Moisture in Concrete by the Plastic Sheet Method |
| ASTM D 4787 : 2008 | Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates |
| ASTM D 1005 : 1995 : R2013 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 4212 : 2016 : R2023 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups |
| ASTM F 1869 : 2016 : REV A | Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride |
| ASTM D 2240 : 2015 : R2021 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM F 2170 : 2009 | Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using <bdit> in situ</bdit> Probes |
| ASTM D 4138 : 1994 : R1999 | Standard Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means |
| ASTM D 3359 : 2007 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 4258 : 2023 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM D 4212 : 1999 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups |
| ASTM D 16 : 2024 | Standard Terminology for Paint, Related Coatings, Materials, and Applications |
| ASTM D 4214 : 2007 : R2015 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
| ASTM D 5162 : 2015 | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates |
| ASTM D 5163 : 1991 : R1996 | Standard Guide for Establishing Procedures to Monitor the Performance of Safety Related Coatings in an Operating Nuclear Power Plant |
| ASTM D 4214 : 2007 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
| ASTM D 4285 : 1983 : R2006 | Standard Test Method for Indicating Oil or Water in Compressed Air |
| ASTM D 7091 : 2013 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 2240 : 2002 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 4285 : 1983 : R2012 | Standard Test Method for Indicating Oil or Water in Compressed Air |
| ASTM F 2170 : 2011 | Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes |
| ASTM D 4752 : 2020 | Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub |
| ASTM D 3925 : 2002 : R2022 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 4212 : 2010 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups |
| ASTM D 4610 : 1998 | Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings |
| ASTM D 3276 : 2015 | Standard Guide for Painting Inspectors (Metal Substrates) |
| ASTM D 6132 : 2008 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage |
| ASTM D 4263 : 1983 : R2005 | Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method |
| ASTM D 4285 : 1983 : R1999 | Standard Test Method for Indicating Oil or Water in Compressed Air |
| ASTM D 4262 : 2005 | Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces |
| ASTM D 4263 : 1983 : R1999 | Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method |
| ASTM D 4262 : 2005 : R2012 | Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces |
| ASTM F 1869 : 2011 | Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride |
| ASTM F 2170 : 2017 | Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes |
| ASTM D 2240 : 2015 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 2240 : 2003 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 5163 : 2004 : REV A | Standard Guide for Establishing Procedures to Monitor the Performance of Service Level I Coatings in an Operating Nuclear Power Plant |
| ASTM D 4258 : 2005 : R2012 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM D 4538 : 2021 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 4414 : 1995 : R2007 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
| ASTM D 6677 : 2001 | Standard Test Method for Evaluating Adhesion by Knife |
| ASTM D 4538 : 2013 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM G 62 : 2014 | Standard Test Methods for Holiday Detection in Pipeline Coatings |
| ASTM D 6237 : 2009 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM D 4262 : 2005 : R2024 | Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces |
| ASTM D 2240 : 2002 : REV B | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 7091 : 2021 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 4610 : 1998 : R2009 | Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings |
| ASTM D 4537 : 1991 : R1996 | Standard Guide for Establishing Procedures to Qualify and Certify Inspection Personnel for Coating Work in Nuclear Facilities |
| ASTM D 7091 : 2012 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 6677 : 2018 | Standard Test Method for Evaluating Adhesion by Knife |
| ASTM D 2583 : 2024 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
| ASTM D 6386 : 2010 | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM F 1869 : 2022 | Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride |
| ASTM D 6237 : 2009 : R2015 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM D 5402 : 2019 : R2024 | Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs |
| ASTM D 4259 : 1988 : R1999 | Standard Practice for Abrading Concrete |
| ASTM D 6132 : 2013 : R2022 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
| ASTM D 7167 : 2012 : R2018 | Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant |
| ASTM D 7167 : 2005 | Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant |
| ASTM F 1869 : 2023 | Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride |
| ASTM D 5144 : 2008 | Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
| ASTM D 3276 : 2007 | Standard Guide for Painting Inspectors (Metal Substrates) |
| ASTM D 6677 : 2007 : R2012 | Standard Test Method for Evaluating Adhesion by Knife |
| ASTM D 4752 : 2020 : R2024 | Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub |
| ASTM D 4260 : 2005 : R2017 | Standard Practice for Liquid and Gelled Acid Etching of Concrete |
| ASTM D 4258 : 1983 : R1999 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM D 7091 : 2005 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 2240 : 2015 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 4212 : 2010 : R2014 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups |
| ASTM D 3276 : 2005 | Standard Guide for Painting Inspectors (Metal Substrates) |
| ASTM F 2170 : 2019 | Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes |
| ASTM D 6677 : 2018 : R2022 | Standard Test Method for Evaluating Adhesion by Knife |
| ASTM D 3359 : 2023 | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 4417 : 2014 | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM D 3363 : 2005 : R2011 | Standard Test Method for Film Hardness by Pencil Test |
| ASTM D 4138 : 2007 : REV A : R2017 | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
| ASTM D 1005 : 1995 : R2007 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 4610 : 1998 : R2013 | Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings |
| ASTM F 2170 : 2019 : REV A | Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes |
| ASTM D 7234 : 2021 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 4263 : 1983 : R2012 | Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method |
| ASTM D 4414 : 1995 : R2013 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
| ASTM D 3359 : 2008 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 2240 : 2005 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 4610 : 1998 : R2017 | Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings |
| ASTM D 4940 : 2015 : EDT 1 | Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives |
| ASTM D 5402 : 2006 : R2011 | Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs |
| ASTM D 3925 : 2002 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 5402 : 1993 : R1999 | Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs |
| ASTM D 4538 : 1995 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 4261 : 2005 : R2024 | Standard Practice for Surface Cleaning Concrete Masonry Units for Coating |
| ASTM D 4258 : 2005 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM D 2240 : 2005 : R2010 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 7234 : 2022 | Standard Test Method for Pull-Off Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 4541 : 1995 : EDT 1 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 4414 : 1995 : R2001 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
| ASTM D 5162 : 2000 | Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates |
| ASTM D 4138 : 2007 | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
| ASTM D 7682 : 2017 : R2022 | Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty |
| ASTM D 4752 : 2003 | Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub |
| ASTM D 3359 : 2017 | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 7167 : 2012 | Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant |
| ASTM D 2240 : 2002 : REV A | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 5144 : 2008 : R2021 | Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
| ASTM D 7682 : 2017 | Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty |
| ASTM D 3925 : 2002 : R2015 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 1005 : 1995 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 2583 : 2007 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
| ASTM D 4261 : 1983 : R1999 | Standard Practice for Surface Cleaning Concrete Unit Masonry for Coating |
| ASTM D 5163 : 2005 | Standard Guide for Establishing Procedures to Monitor the Performance of Service Level I Coatings in an Operating Nuclear Power Plant |
| ASTM D 4940 : 2015 | Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives |
| ASTM D 4261 : 2005 | Standard Practice for Surface Cleaning Concrete Masonry Units for Coating |
| ASTM D 16 : 2023 | Standard Terminology for Paint, Related Coatings, Materials, and Applications |
| ASTM D 6237 : 2024 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM D 6237 : 2003 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM D 2583 : 1995 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
| ASTM D 6132 : 2004 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage |
| ASTM D 5402 : 2015 | Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs |
| ASTM D 3925 : 2002 : R2010 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 4138 : 2007 : REV A | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
| ASTM D 4212 : 2016 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups |
| ASTM D 4263 : 1983 : R2018 | Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method |
| ASTM D 4260 : 2005 : R2012 | Standard Practice for Liquid and Gelled Acid Etching of Concrete |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.