ASTM D 5457 : 2019 : REV B
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
Available format(s)
Hardcopy , PDF
Superseded date
01-10-2019
Superseded by
Language(s)
English
Published date
15-04-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.This specification covers procedures for computing the reference resistance of wood-based materials and structural connections for use in load and resistance factor design (LRFD).
| Committee |
D 07
|
| DocumentType |
Standard
|
| Pages |
12
|
| ProductNote |
This standard also refer to ASCE 7-16.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers procedures for computing the reference resistance of wood-based materials and structural connections for use in load and resistance factor design (LRFD). The format conversion procedure is outlined in Section 4. The test-based derivation procedure is outlined in Annex A1. The reference resistance derived from this specification applies to the design of structures addressed by the load combinations in ASCE 7-16.
1.2A commentary to this specification is provided in Appendix X1.
1.3Units—The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 5456 : 2019 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5055 : 2019 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 7033 : 2014 | Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels |
| ASTM D 7341 : 2014 | Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing |
| ASTM D 6815 : 2009 : R2015 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM D 7290 : 2006 : R2017 | Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications |
| ASTM D 3737 : 2008 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 1990 : 2000 : R2002 : EDT 1 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 1037 : 2006 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 3500 : 2014 | Standard Test Methods for Structural Panels in Tension |
| ASTM D 1990 : 2007 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 5055 : 2011 : REV A | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 1761 : 1988 : R2000 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 2718 : 2018 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 5055 : 2000 : REV A | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 1037 : 2012 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 4761 : 2013 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM D 5456 : 2006 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2719 : 1989 : R2001 : EDT 1 | Standard Test Methods for Structural Panels in Shear Through-the-Thickness |
| ASTM D 5456 : 2014 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 3737 : 2001 : REV B | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 3500 : 1990 : R2003 | Standard Test Methods for Structural Panels in Tension |
| ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM D 3737 : 2012 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 5055 : 2005 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 5456 : 2005 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 3737 : 2018 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 3500 : 1990 : R1995 : EDT 1 | Standard Test Methods for Structural Panels in Tension |
| ASTM D 5456 : 2014 : REV B | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 1990 : 2016 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 1990 : 2000 : EDT 1 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 2718 : 2000 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 3500 : 1990 : R2009 | Standard Test Methods for Structural Panels in Tension |
| ASTM D 3501 : 1994 | Standard Test Methods for Wood-Based Structural Panels in Compression |
| ASTM D 4761 : 2002 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM D 5055 : 2010 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 4761 : 2011 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM D 5456 : 2012 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 3737 : 2009 : EDT 1 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 5456 : 2014 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5055 : 2011 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 4761 : 2018 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials |
| ASTM D 5456 : 2017 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 1761 : 2012 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 3043 : 2017 | Standard Test Methods for Structural Panels in Flexure |
| ASTM D 3043 : 2000 | Standard Test Methods for Testing Structural Panels in Flexure |
| ASTM D 1761 : 1988 : R2000 : EDT 1 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 2719 : 2013 | Standard Test Methods for Structural Panels in Shear Through-the-Thickness |
| ASTM D 5456 : 2008 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 1761 : 2006 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 3043 : 2000 : EDT 1 | Standard Test Methods for Testing Structural Panels in Flexure |
| ASTM D 2719 : 1989 : R1994 : EDT 1 | Standard Test Methods for Structural Panels in Shear Through-the-Thickness |
| ASTM D 5456 : 2017 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 1037 : 1999 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 4761 : 2019 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials |
| ASTM D 3501 : 2005 : REV A | Standard Test Methods for Wood-Based Structural Panels in Compression |
| ASTM D 5456 : 2005 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2915 : 2003 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 5055 : 2019 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 4761 : 2005 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM D 5456 : 2011 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2010 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2719 : 1989 : R2001 | Standard Test Methods for Structural Panels in Shear Through-the-Thickness |
| ASTM D 1037 : 2006 : REV A | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 5055 : 2013 : EDT 1 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 1037 : 1978 | Standard Methods of Evaluating the Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 3737 : 2009 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 3737 : 2018 : EDT 1 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 3737 : 2002 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 3737 : 2007 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 5055 : 2002 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 5055 : 2013 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 5456 : 2009 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2718 : 2000 : R2006 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 2718 : 2000 : EDT 1 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 2718 : 2000 : R2011 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 3501 : 2005 : REV A : R2011 | Standard Test Methods for Wood-Based Structural Panels in Compression |
| ASTM D 5055 : 2008 : REV A | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 5456 : 2001 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 1999 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 3737 : 2006 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 3501 : 2005 : REV A : R2018 | Standard Test Methods for Wood-Based Structural Panels in Compression |
| ASTM D 3737 : 2003 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 5055 : 2003 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 5055 : 2008 : REV A : EDT 1 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 5456 : 2013 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 1761 : 1988 : R1995 : EDT 1 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 5456 : 2009 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5055 : 2008 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 5456 : 2003 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2019 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2001 : REV A : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 3737 : 2000 : REV A | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 3737 : 2004 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 1990 : 2014 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 3043 : 1987 : R1993 : EDT 1 | Standard Methods of Testing Structural Panels in Flexure |
| ASTM D 5456 : 2007 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2719 : 1989 : R2007 | Standard Test Methods for Structural Panels in Shear Through-the-Thickness |
| ASTM D 2718 : 2000 : R2011 : EDT 1 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 5456 : 2010 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5055 : 2016 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 5055 : 2004 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 4761 : 2002 : REV A | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM D 2915 : 2010 | Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM D 5055 : 2009 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 5456 : 2001 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2915 : 1998 : EDT 1 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 5456 : 2013 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2011 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2915 : 2002 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 2719 : 2019 | Standard Test Methods for Wood Structural Panels in Shear Through-the-Thickness |
| ASTM D 5456 : 2018 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5055 : 2012 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 3737 : 2005 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 3501 : 2005 | Standard Test Methods for Wood-Based Structural Panels in Compression |
| ASTM D 5055 : 2007 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.