ASTM D 5386 : 1993 : REV B : R2000 : EDT 1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
10-02-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 16
|
| DocumentType |
Test Method
|
| Pages |
3
|
| ProductNote |
Reconfirmed EDT 1
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This test method covers an instrumental method for the CIE (Commission International de l'Eclairage) tristimulus measurement of the color of near-clear liquid samples. The measurement is converted to color ratings in the platinum-cobalt system.
1.2 This test method has been found applicable to the color measurement of clear, liquid samples, free of haze, with nominal platinum cobalt color values in the 0 to 30 range. It is applicable to nonfluorescent liquids with light absorption characteristics similar to those of the platinum cobalt color standard solutions. Test Methods D1686, D2108, and
1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 4710 : 2007 : R2012 | Standard Specification for Acetaldehyde (Withdrawn 2021) |
| ASTM D 1045 : 2014 | Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics |
| ASTM D 4877 : 2014 | Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates |
| ASTM D 2916 : 2009 : R2017 | Standard Specification for Isophorone |
| ASTM D 2693 : 2007 : R2012 | Standard Specification for Ethylene Glycol (Withdrawn 2021) |
| ASTM D 5871 : 2017 | Standard Specification for Benzene for Cyclohexane Feedstock |
| ASTM D 5136 : 2019 | Standard Specification for High Purity <emph type="ital">p</emph>-Xylene |
| ASTM D 6367 : 2017 | Standard Specification for AMS (α-Methylstyrene) |
| ASTM D 3131 : 2007 : R2013 | Standard Specification for Isopropyl Acetate (99 % Grade) |
| ASTM D 5606 : 2017 | Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock |
| ASTM D 7951 : 2018 | Standard Specification for Disproportionation (TDP) Toluene |
| ASTM D 2190 : 2007 : R2013 | Standard Specification for Vinyl Acetate |
| ASTM D 841 : 2017 : REV A | Standard Specification for Nitration Grade Toluene |
| ASTM D 3128 : 2007 : R2013 | Standard Specification for 2-Methoxyethanol |
| ASTM D 4077 : 2017 | Standard Specification for Cumene (Isopropylbenzene) |
| ASTM D 5309 : 2017 | Standard Specification for Cyclohexane 999 |
| ASTM D 5137 : 2007 : R2013 | Standard Specification for Hexyl Acetate |
| ASTM D 2917 : 2007 : R2013 | Standard Specification for Methyl Isoamyl Ketone |
| ASTM D 5164 : 2005 : R2019 | Standard Specification for Propylene Glycol and Dipropylene Glycol |
| ASTM E 2664 : 2016 | Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol |
| ASTM D 1007 : 2011 : R2019 | Standard Specification for <emph type="bdit">sec</emph>-Butyl Alcohol<sup>,</sup> |
| ASTM D 770 : 2011 : R2019 | Standard Specification for Isopropyl Alcohol<sup>,</sup> |
| ASTM D 304 : 2011 : R2019 | Standard Specification for <emph type="bdit">n</emph>-Butyl Alcohol (Butanol) |
| ASTM D 3622 : 2011 : R2019 | Standard Specification for 1-Propanol (<emph type="bdit">n</emph>-Propyl Alcohol) |
| ASTM D 4360 : 2011 : R2019 | Standard Specification for Methyl <emph type="bdit">n</emph>-Amyl Ketone |
| ASTM D 740 : 2011 : R2019 | Standard Specification for Methyl Ethyl Ketone<sup>,</sup> |
| ASTM D 4614 : 2011 : R2019 | Standard Specification for Ethyl Acetate (All Grades) |
| ASTM D 331 : 2011 : R2019 | Standard Specification for 2-Ethoxyethanol<sup>,</sup> |
| ASTM E 202 : 2018 | Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols |
| ASTM D 1719 : 2011 : R2019 | Standard Specification for Isobutyl Alcohol<sup>,</sup> |
| ASTM D 3130 : 2011 : R2019 | Standard Specification for <emph type="bdit">n</emph>-Propyl Acetate (96 % Grade) |
| ASTM D 2694 : 2005 : R2019 | Standard Specification for Diethylene Glycol<sup>,</sup> |
| ASTM D 4615 : 2012 | Standard Specification for n-Butyl Acetate (All Grades) (Withdrawn 2021) |
| ASTM D 8005 : 2018 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 5211 : 2017 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
| ASTM D 4837 : 2007 : R2012 | Standard Specification for Propylene Glycol Monomethyl Ether (Withdrawn 2021) |
| ASTM D 4890 : 2018 | Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols |
| ASTM D 843 : 2019 | Standard Specification for Nitration Grade Xylene |
| ASTM D 2627 : 2008 : R2012 | Standard Specification for Diacetone Alcohol (Withdrawn 2021) |
| ASTM D 5471 : 2018 | Standard Specification for O-Xylene 980 |
| ASTM D 8087 : 2018 | Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry |
| ASTM D 4709 : 2007 : R2012 | Standard Specification for Methyl Acrylate (Withdrawn 2021) |
| ASTM D 2827 : 2019 | Standard Specification for Styrene Monomer |
| ASTM D 1152 : 2006 : R2012 | Standard Specification for Methanol (Methyl Alcohol) (Withdrawn 2021) |
| ASTM D 2636 : 2007 : R2012 | Standard Specification for Hexylene Glycol (Withdrawn 2021) |
| ASTM D 3540 : 2012 | Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade) (Withdrawn 2021) |
| ASTM D 3728 : 2008 : R2012 | Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade) (Withdrawn 2021) |
| ASTM D 330 : 2007 : R2013 | Standard Specification for 2-Butoxyethanol |
| ASTM D 1969 : 2007 : R2012 | Standard Specification for 2-Ethylhexanol (Withdrawn 2021) |
| ASTM D 2634 : 2007 : R2013 | Standard Specification for Methyl Amyl Acetate (95 % Grade) |
| ASTM D 4734 : 2018 : REV A | Standard Specification for Refined Benzene-545 |
| ASTM D 3193 : 2019 | Standard Specification for Ethylbenzene |
| ASTM D 4416 : 2009 : R2017 | Standard Specification for Acrylic Acid |
| ASTM D 1153 : 2012 | Standard Specification for Methyl Isobutyl Ketone (Withdrawn 2021) |
| ASTM D 7125 : 2017 | Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process |
| ASTM D 608 : 2005 : R2019 | Standard Specification for Dibutyl Phthalate |
| ASTM D 2378 : 2007 : R2012 | Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited (Withdrawn 2021) |
| ASTM D 4836 : 2009 : R2017 | Standard Specification for Dipropylene Glycol Monomethyl Ether |
| ASTM D 3548 : 2009 : R2017 | Standard Specification for Ethyl Acrylate |
| ASTM D 2359 : 2018 : REV A | Standard Specification for Refined Benzene-535 |
| ASTM D 1836 : 2007 : R2013 | Standard Specification for Commercial Hexanes |
| ASTM D 4835 : 2008 : R2012 | Standard Specification for Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021) |
| ASTM D 3735 : 2007 : R2012 | Standard Specification for VM&P Naphthas (Withdrawn 2021) |
| ASTM E 805 : 2012 : REV A : R2017 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| ASTM D 1718 : 2009 : R2017 | Standard Specification for Isobutyl Acetate (95 % Grade) |
| ASTM D 2635 : 2007 : R2012 | Standard Specification for Methyl Isobutyl Carbinol (Withdrawn 2021) |
| ASTM D 329 : 2007 : R2013 | Standard Specification for Acetone |
| ASTM D 7124 : 2017 | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
| ASTM D 7185 : 2017 | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.