ASTM D 5199 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
Hardcopy , PDF
20-06-2019
English
01-02-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.This test method covers the measurement of the nominal thickness of geosynthetics, except textured and some structured geomembranes where the entire surface of the presser foot cannot come into complete contact with the geosynthetic surface.
| Committee |
D 35
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This test method covers the measurement of the nominal thickness of geosynthetics, except textured and some structured geomembranes where the entire surface of the presser foot cannot come into complete contact with the geosynthetic surface.
1.2 This test method does not provide thickness values for geosynthetics under variable normal compressive stresses. This test method determines nominal thickness, not necessarily minimum thickness.
1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 6454/D6454M : 1999 : R2016 : EDT 1 | Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs) |
| ASTM D 5747/D5747M : 2008 : R2013 : EDT 1 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids |
| ASTM D 7176 : 2006 : R2018 | Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications |
| ASTM D 6495/D6495M : 2018 | Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners |
| ASTM D 4491/D4491M : 2017 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 7273/D7273M : 2008 : R2013 : EDT 1 | Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites |
| ASTM D 6389 : 2017 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids |
| ASTM D 7178 : 2016 : EDT 1 | Standard Practice for Determining the Number of Constrictions “<emph type="bdit" >m</emph>” of Non-Woven Geotextiles as a Complementary Filtration Property |
| ASTM D 6455 : 2011 : R2018 | Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs) |
| ASTM D 7106/D7106M : 2005 : R2015 : EDT 1 | Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
| ASTM D 5397 : 2019 | Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
| ASTM D 5514/D5514M : 2018 | Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics |
| ASTM D 7056 : 2007 : R2018 | Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams |
| ASTM D 6392 : 2012 : R2018 | Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods |
| ASTM D 6693/D6693M : 2004 : R2015 : EDT 1 | Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes |
| ASTM D 7272 : 2006 : R2018 | Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods |
| ASTM D 5889/D5889M : 2018 | Standard Practice for Quality Control of Geosynthetic Clay Liners |
| ASTM D 7406 : 2007 : R2012 | Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products |
| ASTM D 2643/D2643M : 2008 : R2019 | Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type) |
| ASTM E 2925 : 2017 | Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function |
| ASTM D 6364 : 2006 : R2018 | Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics |
| ASTM D 6917 : 2016 | Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.