ASTM D 512 : 2023
Current
The latest, up-to-date edition.
Standard Test Methods for Chloride Ion In Water
Hardcopy , PDF
English
14-04-2023
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 19
|
| DocumentType |
Test Method
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover the determination of chloride ion in water, wastewater (Test Method C only), and brines. The following three test methods are included:
| Sections |
| Test Method A (Mercurimetric Titration) | 7 to14 |
| Test Method B (Silver Nitrate Titration) | 15 to 21 |
| Test Method C (Ion-Selective Electrode Method) | 22 to 29 |
1.2Test Methods A, B, and C were validated under Practice D2777 – 77, and only Test Method B conforms also to Practice D2777 – 86. Refer to Sections 14, 21, and 29 for further information.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see 26.1.1.
1.5A former colorimetric test method was discontinued. Refer to Appendix X1 for historical information.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 800 : 2020 | Standard Guide for Measurement of Gases Present or Generated During Fires |
| ASTM D 5752 : 2010 : R2017 | Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines |
| ASTM D 4194 : 2023 | Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices |
| ASTM F 2168 : 2013 : R2019 | Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring |
| ASTM D 8039 : 2016 | Standard Specification for Heat Transfer Fluids (HTF) for Heating and Air Conditioning (HVAC) Systems |
| ASTM D 5615 : 2021 | Standard Practice for Operating Characteristics of Home Reverse Osmosis Devices |
| ASTM D 7517 : 2019 | Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 8006 : 2016 | Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations |
| ASTM D 5952 : 2008 : R2015 | Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) (Withdrawn 2024) |
| ASTM D 887 : 2013 : R2022 | Standard Practices for Sampling Water-Formed Deposits |
| ASTM D 3223 : 2017 | Standard Test Method for Total Mercury in Water |
| ASTM F 2191/F2191M : 2013 : R2020 : EDT 1 | Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn |
| ASTM D 3306 : 2021 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 1748 : 2022 | Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet |
| ASTM C 375 : 2022 | Standard Classification of Water Used in Milling of Porcelain Enamel |
| ASTM F 862 : 2011 : R2022 | Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids |
| ASTM D 4985 : 2010 : R2015 | Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA) |
| ASTM D 7518 : 2020 | Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 4328 : 2018 | Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines |
| ASTM D 7714 : 2011 : R2021 | Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 1129 : 2013 : R2020 : EDT 2 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2013 : R2020 : EDT 1 | Standard Terminology Relating to Water |
| ASTM E 200 : 2016 | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
| ASTM E 200 : 2023 | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.