Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 4924 : 1989 : R2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Classification for Petroleum Waxes for Use in Rubber Compounding

Available format(s)

Hardcopy , PDF

Superseded date

05-01-2022

Superseded by

ASTM D 4924 : 2021

Language(s)

English

Published date

10-03-2017

$108.03
Including GST where applicable

CONTAINED IN VOL. 09.01, 2017 Identifies a classification system and test procedures for petroleum waxes used in rubber compounding as a static protective agent or material for unsaturated rubbers, for example, polyisoprene, chloroprene, styrene-butadiene, acrylonitrile-butadiene, polybutadiene and natural rubbers.

Committee
D 11
DocumentType
Standard
Pages
2
ProductNote
Reconfirmed 2017
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This classification is intended to establish a classification system and test methods for petroleum waxes used in rubber compounding primarily as a static protective agent or material for unsaturated rubbers such as styrene-butadiene rubber, polyisoprene rubber, natural rubber, chloroprene rubber, acrylonitrile-butadiene rubber, and polybutadiene rubber. These unsaturated rubbers are subject to ozone cracking. Under certain exposure conditions, waxes retard this cracking.

1.2This classification is applicable to petroleum waxes used as process aids in rubber compounding. It is not applicable to nonpetroleum waxes such as carnuba wax, candelille wax, or ceresin wax, nor to synthetic hydrocarbon waxes such as polyethylene wax. These non-petroleum waxes display a different behavior on gas chromatographic analysis than do petroleum waxes.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D 4419 : 1990 : R2000 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D 1321 : 2010 : R2015 Standard Test Method for Needle Penetration of Petroleum Waxes
ASTM D 4419 : 1990 : R2015 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D 3944 : 2012 Standard Test Method for Solidification Point of Petroleum Wax
ASTM D 1321 : 2016 Standard Test Method for Needle Penetration of Petroleum Waxes
ASTM D 1747 : 2009 : R2019 Standard Test Method for Refractive Index of Viscous Materials
ASTM D 2887 : 2006 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 1500 : 2004 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 87 : 2004 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D 1500 : 2012 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 2887 : 1999 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 1833 : 1987 : R2017 Standard Test Method for Odor of Petroleum Wax
ASTM D 3944 : 1988 : R1993 : EDT 1 Standard Test Method for Solidification Point of Petroleum Wax
ASTM D 1321 : 2016 : REV A Standard Test Method for Needle Penetration of Petroleum Waxes
ASTM D 3944 : 1988 : R2000 Standard Test Method for Solidification Point of Petroleum Wax
ASTM D 2887 : 2006 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2014 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2001 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 445 : 1988 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
ASTM D 1833 : 1987 : R1999 Standard Test Method for Odor of Petroleum Wax
ASTM D 87 : 2009 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D 1500 : 2003 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 4419 : 1990 : R2021 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D 1747 : 1962 : R1978 Standard Test Method for Refractive Index Of Viscous Materials
ASTM D 1500 : 1982 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 1321 : 2002 Standard Test Method for Needle Penetration of Petroleum Waxes
ASTM D 3944 : 2012 : R2017 Standard Test Method for Solidification Point of Petroleum Wax
ASTM D 1747 : 2009 Standard Test Method for Refractive Index of Viscous Materials
ASTM D 1833 : 1987 : R2012 Standard Test Method for Odor of Petroleum Wax
ASTM D 1500 : 2002 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 2887 : 2019 : REV A : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 1833 : 1987 : R2007 Standard Test Method for Odor of Petroleum Wax
ASTM D 1321 : 2004 Standard Test Method for Needle Penetration of Petroleum Waxes
ASTM D 87 : 2009 : R2018 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D 1500 : 1998 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 4419 : 1990 : R2010 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D 1500 : 2012 : R2017 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 1833 : 1987 : R2004 Standard Test Method for Odor of Petroleum Wax
ASTM D 2887 : 2001 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 4419 : 1990 : R2005 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D 3944 : 1988 : R2005 Standard Test Method for Solidification Point of Petroleum Wax
ASTM D 1747 : 2009 : R2014 Standard Test Method for Refractive Index of Viscous Materials
ASTM D 445 : 2019 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 2887 : 2016 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2008 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2019 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2018 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2012 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 1321 : 2010 Standard Test Method for Needle Penetration of Petroleum Waxes
ASTM D 1321 : 2002 : REV A Standard Test Method for Needle Penetration of Petroleum Waxes
ASTM D 4419 : 1990 : R1995 : EDT 1 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D 1747 : 1999 Standard Test Method for Refractive Index of Viscous Materials
ASTM D 2887 : 2019 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 445 : 2001 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
ASTM D 445 : 2021 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 2887 : 2019 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2013 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2015 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2015 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2004 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 721 : 2017 : REDLINE Standard Test Method for Oil Content of Petroleum Waxes
ASTM D 2887 : 2002 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 1500 : 2004 : REV A Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 1500 : 2007 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 2887 : 2016 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2004 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 1321 : 1997 Standard Test Method for Needle Penetration of Petroleum Waxes
ASTM D 2887 : 2003 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2 : 1933 Method of Test for Abrasion of Rock by Use of the Deval Machine (Withdrawn 1970)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more