ASTM D 4849 : 2020
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Related to Yarns and Fibers
Hardcopy , PDF
10-08-2021
English
12-06-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 13
|
| DocumentType |
Reference Material
|
| Pages |
12
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This standard is a compilation of terminology developed by Committee D13.58 on Yarns and Fibers.
1.1.1This terminology, mostly definitions, is unique to fibers and yarns used in the textile industry. Terms that are generally understood or adequately defined in other readily available sources are not included.
1.1.2Subcommittee D13.58 has jurisdictional responsibility for every item in this standard. The standards in which the terms and definitions are used are listed by number after the definition. The wording of an entry cannot be changed without the approval of 13.58 subcommittee. Any changes approved by the subcommittee and main committee are then directed to subcommittee D13.92 on Terminology for subsequent changes or additions to Terminology D123.
1.1.3This terminology standard is not all inclusive of the terms under the jurisdiction of Subcommittee D13.58. Other terminology standards under the jurisdiction of Subcommittee D13.58 are D3888, D4466, and D4848.
1.2This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 3333 : 2007 : R2018 | Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing |
| ASTM D 3823 : 2007 : R2018 | Standard Practice for Determining Ticket Numbers for Sewing Threads |
| ASTM D 1578 : 1993 : R2016 | Standard Test Method for Breaking Strength of Yarn in Skein Form |
| ASTM D 204 : 2002 : R2016 | Standard Test Methods for Sewing Threads |
| ASTM D 2256/D2256M : 2010 : R2015 | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
| ASTM D 2594 : 2004 : R2016 | Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power |
| ASTM D 3693 : 2002 : R2016 | Standard Specification for Labeled Length per Holder of Sewing Thread |
| ASTM D 3883 : 2004 : R2016 | Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics |
| ASTM D 5034 : 2009 : R2017 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 5344 : 1999 : R2017 | Standard Test Method for Extension Force of Partially Oriented Yarn |
| ASTM D 6197 : 1999 : R2017 | Standard Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests |
| ASTM D 6612 : 2000 : R2016 | Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester |
| ASTM D 6614 : 2007 : R2015 | Standard Test Method for Stretch Properties of Textile Fabrics – CRE Method |
| ASTM D 76/D76M : 2011 : R2016 | Standard Specification for Tensile Testing Machines for Textiles |
| ASTM D 1907/D1907M : 2012 : R2018 | Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method |
| ASTM D 123 : 2019 | Standard Terminology Relating to Textiles |
| ASTM D 3107 : 2007 : R2019 | Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns |
| ASTM D 5035 : 2011 : R2019 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM D 5647 : 2007 : R2018 | Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus |
| ASTM D 2255/D2255M : 2009 : R2020 | Standard Test Method for Grading Spun Yarns for Appearance |
| ASTM D 2591 : 2007 : R2020 | Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens) |
| ASTM D 1422/D1422M : 2013 : R2020 | Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method |
| ASTM D 1425/D1425M : 2014 : R2020 | Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment |
| ASTM D 1244 : 1998 : R2020 | Standard Practice for Designation of Yarn Construction |
| ASTM D 3822/D3822M : 2014 : R2020 | Standard Test Method for Tensile Properties of Single Textile Fibers |
| ASTM D 3108/D3108M : 2013 : R2020 | Standard Test Method for Coefficient of Friction, Yarn to Solid Material |
| ASTM D 3412/D3412M : 2013 : R2020 | Standard Test Method for Coefficient of Friction, Yarn to Yarn |
| ASTM D 2494 : 2013 : R2020 | Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow |
| ASTM D 5103 : 2007 : R2018 | Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test) |
| ASTM D 2259 : 2002 : R2016 : EDT 1 | Standard Test Method for Shrinkage of Yarns |
| ASTM D 2731 : 2015 | Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines) |
| ASTM D 3218 : 2007 : R2018 | Standard Specification for Polyolefin Monofilaments |
| ASTM D 4120 : 2007 : R2018 | Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests |
| ASTM D 6587 : 2012 : R2018 | Standard Test Method for Yarn Number Using Automatic Tester |
| ASTM D 6717 : 2007 : R2018 | Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens) |
| ASTM D 6720 : 2007 : R2018 | Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method) |
| ASTM D 3217/D3217M : 2015 | Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations |
| ASTM D 2258/D2258M : 2016 | Standard Practice for Sampling Yarn for Testing |
| ASTM D 1423/D1423M : 2016 | Standard Test Method for Twist in Yarns by Direct-Counting |
| ASTM D 3883 : 2004 : R2020 | Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics |
| ASTM D 861 : 2007 : R2018 | Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns |
| ASTM D 2645 : 2007 : R2018 | Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems |
| ASTM D 4724/D4724M : 2021 | Standard Test Method for Entanglements in Filament Yarns by Needle Insertion |
| ASTM D 2402 : 2007 : R2018 | Standard Test Method for Water Retention of Textile Fibers (Centrifuge Procedure) |
| ASTM D 2594 : 2020 | Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power |
| ASTM D 3937 : 2012 : R2018 | Standard Test Method for Crimp Frequency of Manufactured Staple Fibers |
| ASTM D 2260 : 2003 : R2018 | Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems |
| ASTM D 3217/D3217M : 2020 | Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations |
| ASTM D 2102 : 2002 : R2018 | Standard Test Method for Shrinkage of Textile Fibers (Bundle Test) |
| ASTM D 5034 : 2021 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 2644 : 2012 : R2018 | Standard Tolerances for Yarns Spun on the Woolen System |
| ASTM D 1577 : 2007 : R2018 | Standard Test Methods for Linear Density of Textile Fibers |
| ASTM D 4031 : 2007 : R2018 | Standard Test Method for Bulk Properties of Textured Yarns |
| ASTM D 2497 : 2007 : R2018 | Standard Tolerances for Manufactured Organic-Base Filament Single Yarns |
| ASTM D 3513 : 2002 : R2018 | Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber |
| ASTM D 2653 : 2007 : R2018 | Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines) |
| ASTM D 4911 : 1994 | Standard Tolerances for Yarns Made of Man-Made Fibers and Spun on the Parallel Worsted or Modified Worsted System (Withdrawn 2000) |
| ASTM D 4031 : 1995 : REV A | Standard Test Method for Bulk Properties of Textured Yarns |
| ASTM D 4238 : 1990 | Standard Test Method for Electrostatic Propensity of Textiles (Withdrawn 1996) |
| ASTM D 3334 : 1980 | Methods of Testing Fabrics Woven from Polyolefin Monofilaments (Withdrawn 1990) |
| ASTM D 3128 : 1997 | Standard Specification for 2-Methoxyethanol |
| ASTM D 3693 : 2002 : R2021 | Standard Specification for Labeled Length per Holder of Sewing Thread |
| ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.