ASTM D 4700 : 1991 : R1998 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Soil Sampling from the Vadose Zone
Hardcopy , PDF
11-11-2014
English
15-07-1991
Committee |
D 18
|
DocumentType |
Guide
|
Pages |
16
|
ProductNote |
Reconfirmed EDT 1
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1 This guide addresses procedures that may be used for obtaining soil samples from the vadose zone (unsaturated zone). Samples can be collected for a variety of reasons including the following:
1.1.1 Stratigraphic description,
1.1.2 Hydraulic conductivity testing,
1.1.3 Moisture content measurement,
1.1.4 Moisture release curve construction,
1.1.5 Geotechnical testing,
1.1.6 Soil gas analyses,
1.1.7 Microorganism extraction, or
1.1.8 Pore liquid and soils chemical analyses.
1.2 This guide focuses on methods that provide soil samples for chemical analyses of the soil or contained liquids or contaminants. However, comments on how methods may be modified for other objectives are included.
1.3 This guide does not describe sampling methods for lithified deposits and rocks (for example, sandstone, shale, tuff, granite).
1.4 In general, it is prudent to perform all field work with at least two people present. This increases safety and facilitates efficient data collection.
1.5 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.
1.6 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 5679 : 2016 | Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers |
ASTM D 1241 : 2015 | Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses (Withdrawn 2024) |
ASTM D 6640 : 2001 : R2015 | Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations |
ASTM D 6232 : 2016 | Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities |
ASTM D 6282/D6282M : 2014 | Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations (Withdrawn 2023) |
ASTM D 420 : 2018 | Standard Guide for Site Characterization for Engineering Design and Construction Purposes |
ASTM D 3282 : 2015 | Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes |
ASTM D 6146 : 1997 : R2018 | Standard Guide for Monitoring Aqueous Nutrients in Watersheds |
ASTM D 6063 : 2011 : R2018 | Standard Guide for Sampling of Drums and Similar Containers by Field Personnel |
ASTM D 7663 : 2012 : R2018 : EDT 1 | Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations |
ASTM E 1943 : 1998 : R2015 | Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites (Withdrawn 2024) |
ASTM D 6009 : 2012 | Standard Guide for Sampling Waste Piles |
ASTM D 6914/D6914M : 2016 | Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices |
ASTM D 5658 : 2013 | Standard Practice for Sampling Unconsolidated Waste From Trucks |
ASTM D 6044 : 1996 : R2015 | Standard Guide for Representative Sampling for Management of Waste and Contaminated Media |
ASTM D 6169/D6169M : 2013 | Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations |
ASTM D 4547 : 2015 | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
ASTM D 6907 : 2005 : R2016 | Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers |
ASTM D 5680 : 2014 | Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers |
ASTM D 7100 : 2011 | Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.