ASTM D 4532 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
Hardcopy , PDF
13-01-2023
English
31-12-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 22
|
| DocumentType |
Test Method
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method provides details for the determination of respirable dust concentration defined in terms of international convention in a range from 0.5 to 10 mg/m3 in workplace atmospheres. Specifics are given for sampling and analysis using any one of a number of commercially available cyclone samplers.
1.2The limitations on the test method are a minimum weight of 0.1 mg of dust on the filter, and a maximum loading of 0.3 mg/m2 on the filter. The test method may be used at higher loadings if the flow rate can be maintained constant.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This test method contains notes that are explanatory and are not part of the mandatory requirements of the method.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM E 2625 : 2019 | Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities |
| ASTM D 8344 : 2020 | Standard Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids |
| ASTM D 8358 : 2021 | Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter |
| ASTM E 1747 : 1995 : R2019 | Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM E 1132 : 2021 | Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica |
| ASTM D 7948 : 2020 | Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry |
| ASTM D 6061 : 2001 : R2018 : EDT 1 | Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| ASTM D 7948 : 2014 : EDT 1 | Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry |
| ASTM D 8208 : 2019 | Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler |
| ASTM D 6059 : 1996 : R2011 | Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy (Withdrawn 2020) |
| ASTM D 6062 : 2019 | Standard Guide for Personal Samplers of Health-Related Aerosol Fractions |
| ASTM D 7049 : 2017 | Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres |
| ASTM D 6552 : 2006 : R2016 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| ASTM E 1747 : 1995 : R2011 | Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM D 6056 : 1996 : R2011 | Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy (Withdrawn 2020) |
| ASTM E 2625 : 2009 : R2017 | Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities |
| ASTM D 4844 : 2016 | Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection |
| ASTM E 1132 : 2013 : EDT 1 | Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica |
| ASTM D 6057 : 1996 : R2011 | Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy (Withdrawn 2020) |
| ASTM D 3195 : 1990 : R2004 | Standard Practice for Rotameter Calibration |
| ASTM D 1356 : 2015 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 2251 : 2007 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM E 2251 : 2003 : REV A | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM D 1356 : 2017 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 2251 : 2003 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM D 1356 : 2015 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 2251 : 2014 : R2021 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM D 6552 : 2006 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| ASTM D 6062 : 2019 | Standard Guide for Personal Samplers of Health-Related Aerosol Fractions |
| ASTM E 2251 : 2010 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM D 6552 : 2006 : R2011 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| ASTM D 5337 : 2011 : R2016 | Standard Practice for Flow Rate Adjustment of Personal Sampling Pumps |
| ASTM D 1356 : 2014 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 2251 : 2011 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM E 2251 : 2014 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM D 6552 : 2006 : R2021 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| ASTM D 7440 : 2008 : R2015 : EDT 1 | Standard Practice for Characterizing Uncertainty in Air Quality Measurements |
| ASTM D 6062 : 1996 : R2001 | Standard Guide for Personal Samplers of Health-Related Aerosol Fractions |
| ASTM D 5337 : 1997 | Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps |
| ASTM D 1356 : 2015 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 7440 : 2008 | Standard Practice for Characterizing Uncertainty in Air Quality Measurements |
| ASTM D 1356 : 2005 : R2010 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 1356 : 2020 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 6062 : 2007 : R2012 | Standard Guide for Personal Samplers of Health-Related Aerosol Fractions |
| ASTM D 6552 : 2006 : R2016 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| ASTM D 1356 : 2000 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 5337 : 2011 | Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps |
| ASTM D 1356 : 2014 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 6552 : 2000 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| ASTM D 1356 : 2014 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 5337 : 2004 | Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps |
| ASTM D 1356 : 2005 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 3195 : 1990 : R1998 : EDT 1 | Standard Practice for Rotameter Calibration |
| ASTM D 6062 : 2007 | Standard Guide for Personal Samplers of Health-Related Aerosol Fractions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.