ASTM D 4489 : 1995 : R2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practices for Sampling of Waterborne Oils
Hardcopy , PDF
06-05-2024
English
19-12-2017
CONTAINED IN VOL. 11.02, 2017 Specifies the procedures to be used in collecting samples of waterborne oils, oil found on adjoining shorelines, or oil-soaked debris, for comparison of oils by spectroscopic and chromatographic techniques, and for elemental analyses.
Committee |
D 19
|
DocumentType |
Standard Practice
|
Pages |
4
|
ProductNote |
Reconfirmed 2017
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1These practices describe the procedures to be used in collecting samples of waterborne oils (see Practice D3415), oil found on adjoining shorelines, or oil-soaked debris, for comparison of oils by spectroscopic and chromatographic techniques, and for elemental analyses.
1.2Two practices are described. Practice A involves “grab sampling” macro oil samples. Practice B can be used to sample most types of waterborne oils and is particularly applicable in sampling thin oil films or slicks. Practice selection will be dictated by the physical characteristics and the location of the spilled oil. These two practices are:
Sections | |
Practice A (for grab sampling thick layers of oil, viscous oils or oil soaked debris, oil globules, tar balls, or stranded oil) | 9 to 13 |
Practice B (for TFE–fluorocarbon polymer strip samplers) | 14 to 17 |
1.3Each of the two practices is designed to collect oil samples with a minimum of water, thereby reducing the possibility of chemical, physical, or biological alteration by prolonged contact with water between the time of collection and analysis.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements, see Section 7.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 3415 : 1998 : R2017 | Standard Practice for Identification of Waterborne Oils |
ASTM E 2143 : 2001 : R2013 | Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons |
ASTM D 3328 : 2006 : R2013 | Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography |
ASTM D 3326 : 2007 : R2017 | Standard Practice for Preparation of Samples for Identification of Waterborne Oils |
ASTM D 5412 : 1993 : R2017 : EDT 1 | Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water |
ASTM D 3325 : 1990 : R2013 | Standard Practice for Preservation of Waterborne Oil Samples |
ASTM D 3328 : 2006 : R2020 | Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography |
ASTM D 3415 : 1998 : R2024 | Standard Practice for Identification of Waterborne Oils |
ASTM E 2143 : 2001 : R2021 | Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons |
ASTM D 3326 : 2007 : R2024 | Standard Practice for Preparation of Samples for Identification of Waterborne Oils |
ASTM D 3325 : 1990 : R2020 | Standard Practice for Preservation of Waterborne Oil Samples |
ASTM D 1129 : 2013 : REDLINE | Standard Terminology Relating to Water |
ASTM D 1129 : 2003 | Standard Terminology Relating to Water |
ASTM D 1129 : 2013 | Standard Terminology Relating to Water |
ASTM D 1129 : 2013 : R2020 | Standard Terminology Relating to Water |
ASTM D 3415 : 1998 : R2004 | Standard Practice for Identificaiton of Waterborne Oils |
ASTM D 1129 : 2013 : R2020 : EDT 2 | Standard Terminology Relating to Water |
ASTM D 1129 : 2006 | Standard Terminology Relating to Water |
ASTM D 3415 : 1998 : R2024 | Standard Practice for Identification of Waterborne Oils |
ASTM D 3415 : 1998 | Standard Practice for Identificaiton of Waterborne Oils |
ASTM D 1129 : 2013 : R2020 : EDT 1 | Standard Terminology Relating to Water |
ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
ASTM D 1129 : 2006 : REV A | Standard Terminology Relating to Water |
ASTM D 1129 : 2003 : REV A | Standard Terminology Relating to Water |
ASTM D 1129 : 2002 | Standard Terminology Relating to Water |
ASTM D 1129 : 2004 | Standard Terminology Relating to Water |
ASTM D 1129 : 2002 : REV A | Standard Terminology Relating to Water |
ASTM D 3415 : 1998 : R2017 | Standard Practice for Identification of Waterborne Oils |
ASTM D 1129 : 2010 | Standard Terminology Relating to Water |
ASTM D 1129 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Water |
ASTM D 1129 : 2001 | Standard Terminology Relating to Water |
ASTM D 1129 : 2004 : EDT 1 | Standard Terminology Relating to Water |
ASTM D 3415 : 1998 : R2011 | Standard Practice for Identificaiton of Waterborne Oils |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.