ASTM D 4442 : 1984
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
30-11-0002
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 07
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| ASTM D 7147 : 2011 : R2018 | Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers |
| ASTM D 4444 : 2013 : R2018 | Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters |
| ASTM C 1789 : 2014 : R2018 | Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels |
| ASTM D 7672 : 2014 : EDT 1 | Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies |
| ASTM D 3501 : 2005 : REV A : R2018 | Standard Test Methods for Wood-Based Structural Panels in Compression |
| ASTM D 5764 : 1997 : REV A : R2018 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
| ASTM D 1037 : 2012 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 143 : 2014 | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM D 4577 : 2019 | Standard Test Method for Compression Resistance of a Container Under Constant Load |
| ASTM D 5751 : 1999 : R2019 | Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
| ASTM D 5652 : 2015 | Standard Test Methods for Single-Bolt Connections in Wood and Wood-Based Products |
| ASTM D 642 : 2015 | Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads |
| ASTM E 2957 : 2017 | Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections |
| ASTM E 108 : 2017 | Standard Test Methods for Fire Tests of Roof Coverings |
| ASTM D 1990 : 2016 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 6643 : 2001 : R2016 | Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance |
| ASTM E 2618 : 2013 : R2019 | Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances |
| ASTM D 7478/D7478M : 2011 : R2017 | Standard Specification for Heavy Duty Sheathed Wood Crates |
| ASTM D 6199 : 2018 : REV A | Standard Practice for Quality of Wood Members of Containers and Pallets |
| ASTM D 4761 : 2019 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials |
| ASTM D 7031 : 2011 : R2019 | Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products |
| ASTM D 7119/D7119M : 2013 : REV A | Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing |
| ASTM D 2718 : 2018 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 2395 : 2017 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM D 7033 : 2014 | Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels |
| ASTM D 5469/D5469M : 2012 | Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems (Withdrawn 2021) |
| ASTM D 6254/D6254M : 2013 | Standard Specification for Wirebound Pallet-Type Wood Boxes |
| ASTM D 7438 : 2013 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 5824 : 1998 : R2017 | Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM D 7433 : 2019 | Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels |
| ASTM D 7338 : 2014 | Standard Guide for Assessment Of Fungal Growth in Buildings |
| ASTM E 2707 : 2015 | Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure |
| ASTM E 84 : 2019 : REV B | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 2579 : 2019 | Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics |
| ASTM E 603 : 2017 | Standard Guide for Room Fire Experiments |
| ASTM D 4027 : 1998 : R2019 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| ASTM D 3498 : 2019 : REV A | Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing |
| ASTM D 6570 : 2018 : REV A | Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber |
| ASTM E 2779 : 2010 : R2017 | Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters |
| ASTM D 5456 : 2019 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 6573/D6573M : 2013 | Standard Specification for General Purpose Wirebound Shipping Boxes |
| ASTM D 3500 : 2014 | Standard Test Methods for Structural Panels in Tension |
| ASTM D 7469 : 2016 | Standard Test Methods for End-Joints in Structural Wood Products |
| ASTM E 72 : 2015 | Standard Test Methods of Conducting Strength Tests of Panels for Building Construction |
| ASTM D 7519 : 2011 | Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting (Withdrawn 2020) |
| ASTM D 3044 : 2016 | Standard Test Method for Shear Modulus of Wood-Based Structural Panels |
| ASTM D 7770 : 2012 | Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method |
| ASTM D 2559 : 2012 : REV A : R2018 | Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions |
| ASTM D 6815 : 2009 : R2015 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM G 198 : 2017 | Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood |
| ASTM D 5572 : 1995 : R2019 | Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
| ASTM D 3499 : 2019 | Standard Test Method for Toughness of Wood Structural Panels |
| ASTM D 198 : 2015 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM D 6874 : 2012 | Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration |
| ASTM D 6782 : 2013 | Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters |
| ASTM D 7966/D7966M : 2016 | Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 2719 : 2019 | Standard Test Methods for Wood Structural Panels in Shear Through-the-Thickness |
| ASTM D 1185 : 1998 : REV A : R2017 | Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping |
| ASTM E 2126 : 2011 : R2018 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings |
| ASTM D 1761 : 2012 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 3043 : 2017 | Standard Test Methods for Structural Panels in Flexure |
| ASTM D 7446 : 2009 : R2017 | Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials |
| ASTM D 4933 : 2016 | Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials |
| ASTM D 1666 : 2017 | Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Panel Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.