ASTM D 4332 : 1999
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing
Superseded date
11-11-2014
Superseded by
Published date
10-04-2001
Sorry this product is not available in your region.
| Committee |
D 10
|
| DocumentType |
Standard Practice
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This practice provides for standard and special conditioning and testing atmospheres that may be used to simulate particular field conditions that a container, package, or packaging component may encounter during its life or testing cycle.
1.2 This practice describes procedures for conditioning these containers, packages, or packaging components so that they may reach equilibrium with the atmosphere to which they may be exposed.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D4003:1998(R2019)e1 | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems<br> |
| ASTM D 3759/D3759M : 2005 : R2019 | Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape |
| ASTM D 3833/D3833M : 1996 : R2019 | Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
| ASTM D 5264 : 1998 : R2019 | Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester |
| ASTM D 6055 : 1996 : R2019 | Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates |
| ASTM D 3654/D3654M : 2006 : R2019 | Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes |
| ASTM D 5375/D5375M : 1998 : R2019 | Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
| ASTM D 5094/D5094M : 2009 : R2014 | Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures (Withdrawn 2023) |
| ASTM D 4919 : 2017 | Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings |
| ASTM D 5750/D5750M : 1995 : R2012 | Standard Guide for Width and Length of Pressure-Sensitive Tape |
| ASTM D 6788 : 2002 : R2017 | Standard Specification for Repositionable Pressure-Sensitive Flags |
| ASTM E 171/E171M : 2011 : R2015 | Standard Practice for Conditioning and Testing Flexible Barrier Packaging |
| ASTM D 880 : 1992 : R2015 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
| ASTM D 642 : 2015 | Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads |
| ASTM D 3816/D3816M : 1996 : R2012 | Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
| ASTM D 999 : 2008 : R2015 | Standard Test Methods for Vibration Testing of Shipping Containers |
| ASTM D 5265 : 2009 : R2016 | Standard Test Method for Bridge Impact Testing |
| ASTM D 5458 : 1995 : R2012 | Standard Test Method for Peel Cling of Stretch Wrap Film |
| ASTM D 6252/D6252M : 1998 : R2019 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle |
| ASTM D 3103 : 2014 | Standard Test Method for Thermal Insulation Performance of Distribution Packages |
| ASTM D 7790 : 2012 | Standard Guide for Preparation of Plastic Packagings Containing Liquids for United Nations (UN) Drop Testing |
| ASTM F 2097 : 2016 | Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products |
| ASTM D 951 : 2017 | Standard Test Method for Water Resistance of Shipping Containers by Spray Method |
| ASTM D 6787/D6787M : 2002 : R2017 | Standard Specification for Repositionable Note Pad |
| ASTM F 3300 : 2018 | Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus |
| ASTM D 7932 : 2017 | Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments |
| ASTM D 7387 : 2013 | Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods) |
| ASTM D 3330/D3330M : 2004 : R2018 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
| ASTM D 3332 : 1999 : R2016 | Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines |
| ASTM D 3652/D3652M : 2001 : R2012 | Standard Test Method for Thickness of Pressure-Sensitive Tapes |
| ASTM D 5277 : 1992 : R2015 | Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester |
| ASTM D 2221 : 2001 : R2015 | Standard Test Method for Creep Properties of Package Cushioning Materials |
| ASTM D 5909 : 1996 : REV A : R2011 | Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance (Withdrawn 2020) |
| ASTM F 2824 : 2010 : R2015 | Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids |
| ASTM D 5330/D5330M : 2006 : R2012 : EDT 1 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| ASTM D 3953 : 2015 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3580 : 1995 : R2015 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
| ASTM D 6295/D6295M : 1998 : R2011 | Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape |
| ASTM D 1968 : 2019 | Standard Terminology Relating to Paper and Paper Products |
| ASTM D 3813/D3813M : 1998 : R2012 : EDT 1 | Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes |
| ASTM D 3611 : 2006 : R2019 | Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes |
| ASTM D 1975 : 2016 | Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails |
| ASTM D 2063/D2063M : 2010 : R2018 | Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment |
| ASTM D 3950 : 2017 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM E 1133 : 1986 : R2016 | Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements |
| ASTM D 6804 : 2002 : R2015 | Standard Guide for Hand Hole Design in Corrugated Boxes |
| ASTM D 6179 : 2007 : R2014 | Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates |
| ASTM F 1980 : 2016 | Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices |
| ASTM F 3159 : 2015 : EDT 1 | Standard Safety Specification for Liquid Laundry Packets |
| ASTM D 3811/D3811M : 1996 : R2018 | Standard Test Method for Unwind Force of Pressure-Sensitive Tapes |
| ASTM D 7386 : 2016 | Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems |
| ASTM D 3889/D3889M : 1996 : R2012 | Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature |
| ASTM D 4169 : 2016 | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 4577 : 2019 | Standard Test Method for Compression Resistance of a Container Under Constant Load |
| ASTM D 5276 : 2019 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
| ASTM D 6653/D6653M : 2013 | Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method |
| ASTM F 2825 : 2018 | Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery |
| ASTM D 1185 : 1998 : REV A : R2017 | Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping |
| ASTM D 6344 : 2004 : R2017 | Standard Test Method for Concentrated Impacts to Transport Packages |
| ASTM D 7030 : 2004 : R2017 | Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
| ASTM D 1596 : 2014 | Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material |
| ASTM D 5112 : 1998 : R2015 | Standard Test Method for Vibration (Horizontal Linear Motion) Test of Products |
| ASTM F 2029 : 2016 | Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength |
| ASTM D 5487 : 2016 | Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines |
| ASTM D 4728 : 2017 | Standard Test Method for Random Vibration Testing of Shipping Containers |
| ASTM F 2095 : 2007 : R2013 | Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates |
| ASTM D 2860/D2860M : 2018 | Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress |
| ASTM D 7860 : 2014 | Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment |
| ASTM D 2658 : 2018 | Standard Test Method for Determining Dimensions of Fiberboard Boxes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.