ASTM D 4308 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
Hardcopy , PDF
02-03-2021
English
29-07-2013
This test method covers and applies to the determination of the “rest” electrical conductivity of aviation fuels and other similar low-conductivity hydrocarbon liquids in the range from 0.1 to 2000 pS/m (see 3.1.2).
Committee |
D 02
|
DocumentType |
Test Method
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers and applies to the determination of the “rest” electrical conductivity of aviation fuels and other similar low-conductivity hydrocarbon liquids in the range from 0.1 to 2000 pS/m (see 3.1.2). This test method can be used in the laboratory or in the field.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3WARNING—Mercury has been designated by many regulatory agencies as a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA’s website—http://www.epa.gov/mercury/faq.htm—for additional information. Users should be aware that selling mercury and/or mercury containing products into your state or country may be prohibited by law.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 7.1.1, 7.2, 8.3, and Annex A1.
ASTM D 2624 : 2015 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 396 : 2021 | Standard Specification for Fuel Oils |
ASTM D 975 : 2022 : REV A | Standard Specification for Diesel Fuel |
ASTM D 2624 : 2022 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 7826 : 2022 | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 396 : 2019 | Standard Specification for Fuel Oils |
ASTM D 7826 : 2019 | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 4865 : 2019 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
ASTM D 4306 : 2015 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 7467 : 2019 | Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20) |
ASTM D 396 : 2020 | Standard Specification for Fuel Oils |
ASTM D 7826 : 2020 : REV A | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 7467 : 2020 : REV A | Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20) |
ASTM D 975 : 2020 : REV C | Standard Specification for Diesel Fuel |
ASTM D 2624 : 2006 : REV A | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 4306 : 1997 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 4306 : 2015 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 4306 : 2001 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 4306 : 2007 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 2624 : 2007 : REV A | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 4306 : 2012 : REV A | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 4306 : 2012 : REV B | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 2624 : 2000 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 2624 : 2001 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 4306 : 2013 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 2624 : 2006 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 4306 : 2020 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 2624 : 2009 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 2624 : 2002 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 2624 : 2015 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 2624 : 2007 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 4306 : 2012 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 4306 : 2012 : REV C | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.