ASTM D 4175 : 2022 : EDT 1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
Available format(s)
Hardcopy , PDF
Superseded date
23-06-2023
Superseded by
Language(s)
English
Published date
08-11-2022
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 02
|
| DocumentType |
Reference Material
|
| Pages |
91
|
| ProductNote |
NOTE—Terms were transferred and updated editorially in November 2022.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This terminology standard covers the compilation of terminology developed by Committee D02 on Petroleum Products, Liquid Fuels, and Lubricants, except that it does not include terms/definitions specific only to the standards in which they appear.
1.1.1The terminology, mostly definitions, is unique to petroleum, petroleum products, lubricants, and certain products from biomass and chemical synthesis. Meanings of the same terms outside of applications to petroleum, petroleum products, and lubricants can be found in other compilations and in dictionaries of general usage.
1.1.2The terms/definitions exist in two places: (1) in the standards in which they appear and (2) in this compilation.
1.2This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 6560 : 2022 | Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products |
| ASTM D 1655 : 2022 | Standard Specification for Aviation Turbine Fuels |
| ASTM D 6810 : 2022 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 1835 : 2022 | Standard Specification for Liquefied Petroleum (LP) Gases |
| ASTM D 7261 : 2022 | Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer |
| ASTM D 7847 : 2022 | Standard Guide for Interlaboratory Studies for Microbiological Test Methods |
| ASTM D 7755 : 2011 : R2022 | Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine |
| ASTM D 6615 : 2022 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
| ASTM D 2709 : 2022 | Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge |
| ASTM D 7665 : 2022 | Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids |
| ASTM D 8470 : 2022 | Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems |
| ASTM D 4177 : 2022 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 8009 : 2022 | Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products |
| ASTM D 5769 : 2022 | Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry |
| ASTM D 8385 : 2022 | Standard Test Method for Dry Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique |
| ASTM D 7157 : 2022 : EDT 1 | Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (<emph type="ital">n</emph >-Heptane Phase Separation; Optical Detection) |
| ASTM D 4048 : 2022 | Standard Test Method for Detection of Copper Corrosion from Lubricating Grease |
| ASTM D 8350 : 2022 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine |
| ASTM D 8279 : 2022 : REV A | Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine |
| ASTM D 2276 : 2022 | Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling |
| ASTM D 3240 : 2022 : REV A | Standard Test Method for Undissolved Water In Aviation Turbine Fuels |
| ASTM D 8114 : 2022 : REV A | Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition |
| ASTM D 2887 : 2022 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography |
| ASTM D 3606 : 2022 | Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography |
| ASTM D 5600 : 2022 | Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 3605 : 2022 | Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy |
| ASTM D 7414 : 2022 | Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
| ASTM D 7624 : 2022 | Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
| ASTM D 7418 : 2022 | Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring |
| ASTM D 7412 : 2022 | Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
| ASTM D 5184 : 2022 | Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry |
| ASTM D 7721 : 2022 | Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency |
| ASTM D 7415 : 2022 | Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
| ASTM D 6595 : 2022 | Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry |
| ASTM D 5056 : 2022 | Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption |
| ASTM D 7844 : 2022 : REV A | Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry |
| ASTM D 7319 : 2022 | Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography |
| ASTM D 4627 : 2022 | Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids |
| ASTM D 3238 : 2022 | Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method |
| ASTM D 4176 : 2022 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
| ASTM D 7328 : 2022 | Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection |
| ASTM D 4929 : 2022 | Standard Test Method for Determination of Organic Chloride Content in Crude Oil |
| ASTM D 8166 : 2022 | Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors |
| ASTM D 2699 : 2022 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel |
| ASTM D 6448 : 2016 : R2022 | Standard Specification for Industrial Burner Fuels from Used Lubricating Oils |
| ASTM D 2700 : 2022 : REV A | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
| ASTM D 6074 : 2015 : R2022 | Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils |
| ASTM D 8340 : 2022 | Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems |
| ASTM D 4012 : 2015 | Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water |
| ASTM D 5706 : 2016 | Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| ASTM D 6618 : 2016 | Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine |
| ASTM D 6681 : 2017 | Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure |
| ASTM D 7217 : 2016 | Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| ASTM D 7482 : 2017 | Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis |
| ASTM D 7423 : 2017 | Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection |
| ASTM D 7546 : 2015 | Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor |
| ASTM D 7596 : 2014 | Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester |
| ASTM D 7668 : 2017 | Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method |
| ASTM D 7996 : 2015 | Standard Test Method for Measuring Visible Spectrum of Asphaltenes in Heavy Fuel Oils and Crude Oils by Spectroscopy in a Microfluidic Platform (Withdrawn 2024) |
| ASTM D 8110 : 2017 | Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) |
| ASTM D 8098 : 2017 | Standard Test Method for Permanent Gases in C<inf>2</inf> and C<inf>3</inf> Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector |
| ASTM D 6185 : 2011 : R2017 | Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases |
| ASTM D 7563 : 2010 : R2016 | Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel |
| ASTM D 6923 : 2018 | Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure |
| ASTM D 2881 : 2019 | Standard Classification for Metalworking Fluids and Related Materials |
| ASTM D 4055 : 2004 : R2019 | Standard Test Method for Pentane Insolubles by Membrane Filtration |
| ASTM D 8181 : 2019 | Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils |
| ASTM D 7112 : 2019 | Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection) |
| ASTM D 7923 : 2019 | Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration |
| ASTM D 7579 : 2009 : R2019 | Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol |
| ASTM D 7317 : 2007 : R2019 | Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method) |
| ASTM D 1404/D1404M : 1999 : R2019 | Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease |
| ASTM D 3699 : 2019 | Standard Specification for Kerosine |
| ASTM D 2982 : 2007 : R2019 | Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils |
| ASTM D 3705 : 2014 : R2019 | Standard Test Method for Misting Properties of Lubricating Fluids |
| ASTM D 189 : 2006 : R2019 | Standard Test Method for Conradson Carbon Residue of Petroleum Products |
| ASTM D 524 : 2015 : R2019 | Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products |
| ASTM D 7421 : 2019 | Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine |
| ASTM D 7594 : 2019 | Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| ASTM D 5707 : 2019 | Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| ASTM D 7219 : 2019 | Standard Specification for Isotropic and Near-isotropic Nuclear Graphites |
| ASTM D 4950 : 2019 | Standard Classification and Specification for Automotive Service Greases |
| ASTM D 7156 : 2019 | Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine |
| ASTM D 6425 : 2019 | Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine |
| ASTM D 5598 : 2020 | Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling |
| ASTM D 6974 : 2020 | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
| ASTM D 8289 : 2020 | Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite |
| ASTM D 5500 : 2020 : REV A | Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
| ASTM D 6423 : 2020 : REV A | Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends |
| ASTM D 5482 : 2020 : REV A | Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric) |
| ASTM D 4953 : 2020 | Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method) |
| ASTM D 7620 : 2010 : R2020 | Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection |
| ASTM D 7155 : 2020 | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
| ASTM D 7622 : 2020 | Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction |
| ASTM D 5501 : 2020 | Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography |
| ASTM C 781 : 2020 | Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components |
| ASTM D 7666 : 2012 : R2019 | Standard Specification for Triglyceride Burner Fuel |
| ASTM D 8011 : 2019 | Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol |
| ASTM D 8184 : 2018 : EDT 1 | Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument |
| ASTM D 7420 : 2018 | Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| ASTM D 7917 : 2014 : R2018 | Standard Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications |
| ASTM D 7978 : 2014 : R2019 | Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method |
| ASTM D 187 : 2018 | Standard Test Method for Burning Quality of Kerosene |
| ASTM D 7623 : 2020 | Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method |
| ASTM D 8045 : 2017 : EDT 1 | Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration |
| ASTM D 1403 : 2020 : REV B | Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment |
| ASTM D 4740 : 2020 | Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test |
| ASTM D 5304 : 2020 | Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure |
| ASTM D 2782 : 2020 | Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method) |
| ASTM D 5705 : 2020 | Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils |
| ASTM D 86 : 2020 : REV B | Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure |
| ASTM D 7669 : 2020 | Standard Guide for Practical Lubricant Condition Data Trend Analysis |
| ASTM D 8274 : 2020 : REV A | Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer |
| ASTM D 7684 : 2011 : R2020 | Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants |
| ASTM D 7898 : 2014 : R2020 | Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery |
| ASTM D 3603 : 2020 | Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method) |
| ASTM D 323 : 2020 : REV A | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) |
| ASTM D 6743 : 2020 | Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids |
| ASTM D 8356 : 2020 | Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio |
| ASTM D 613 : 2018 : REV A : EDT 1 | Standard Test Method for Cetane Number of Diesel Fuel Oil |
| ASTM D 7920 : 2021 | Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography |
| ASTM D 7549 : 2021 | Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure |
| ASTM D 7794 : 2021 | Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines |
| ASTM D 7862 : 2021 | Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel |
| ASTM D 7463 : 2021 | Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water |
| ASTM D 7687 : 2021 | Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration |
| ASTM D 8070 : 2021 | Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay |
| ASTM D 8386 : 2021 | Standard Test Method for Determining Enhanced Filter Blocking Tendency (EFBT) |
| ASTM D 8324 : 2021 | Standard Guide for Selection of Environmentally Acceptable Lubricants for the U.S. Environmental Protection Agency (EPA) Vessel General Permit |
| ASTM D 8049 : 2021 | Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer |
| ASTM D 7577 : 2012 : R2021 | Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
| ASTM D 8211 : 2021 | Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface |
| ASTM D 6890 : 2021 | Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber |
| ASTM D 5967 : 2021 | Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine |
| ASTM D 8235 : 2021 | Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
| ASTM D 5983 : 2021 | Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
| ASTM D 974 : 2021 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
| ASTM D 8377 : 2021 : REV A | Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt |
| ASTM D 2885 : 2021 | Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique |
| ASTM D 7372 : 2021 | Standard Guide for Analysis and Interpretation of Proficiency Test Program Results |
| ASTM C 886 : 2021 | Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials |
| ASTM D 5798 : 2021 | Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines |
| ASTM D 7720 : 2021 | Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination |
| ASTM D 5797 : 2021 | Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines |
| ASTM D 6217 : 2021 | Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration<rangeref></rangeref > |
| ASTM D 8076 : 2021 : REV B | Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines |
| ASTM D 4806 : 2021 : REV A | Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
| ASTM D 7484 : 2021 : REV B | Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine |
| ASTM D 4998 : 2013 : R2021 | Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids |
| ASTM D 7690 : 2011 : R2021 | Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography |
| ASTM D 7451 : 2021 | Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels |
| ASTM D 4625 : 2021 | Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F) |
| ASTM D 4693 : 2007 : R2021 | Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings |
| ASTM D 7922 : 2021 | Standard Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography |
| ASTM D 7301 : 2021 | Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose |
| ASTM D 6160 : 2021 | Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography |
| ASTM D 7059 : 2021 | Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography |
| ASTM D 4150 : 2021 : REV B | Standard Terminology Relating to Gaseous Fuels |
| ASTM D 5134 : 2021 | Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography |
| ASTM D 4294 : 2021 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 7223 : 2021 | Standard Specification for Aviation Certification Turbine Fuel |
| ASTM D 3700 : 2021 | Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
| ASTM D 1401 : 2021 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 976 : 2021 | Standard Test Method for Calculated Cetane Index of Distillate Fuels |
| ASTM D 4291 : 2021 | Standard Test Method for Trace Ethylene Glycol in Used Engine Oil |
| ASTM D 5291 : 2021 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
| ASTM D 6823 : 2008 : R2021 | Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils |
| ASTM D 7043 : 2021 | Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump |
| ASTM D 4737 : 2021 | Standard Test Method for Calculated Cetane Index by Four Variable Equation |
| ASTM D 4814 : 2021 : REV C | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 2268 : 2021 | Standard Test Method for Analysis of High-Purity <emph type="ital">n</emph>-Heptane and <emph type="ital">Iso</emph>octane by Capillary Gas Chromatography |
| ASTM D 7796 : 2021 | Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography |
| ASTM D 5441 : 2021 | Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography |
| ASTM D 217 : 2021 : REV A | Standard Test Methods for Cone Penetration of Lubricating Grease |
| ASTM D 6668 : 2021 | Standard Test Method for Discrimination Between Flammability Ratings of F = 0 <brk />and F = 1 |
| ASTM D 8412 : 2021 | Standard Guide for Quantification of Microbial Contamination in Liquid Fuels and Fuel-Associated Water by Quantitative Polymerase Chain Reaction (qPCR) |
| ASTM D 2622 : 2021 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 5483 : 2021 | Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry |
| ASTM D 6584 : 2021 | Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography |
| ASTM D 4289 : 2021 | Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids |
| ASTM D 6200 : 2021 | Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis |
| ASTM D 6710 : 2021 | Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil |
| ASTM D 4056 : 2021 | Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants |
| ASTM D 6482 : 2021 | Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method) |
| ASTM D 2878 : 2021 | Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
| ASTM D 7846 : 2021 | Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites |
| ASTM D 8046 : 2021 | Standard Guide for Pumpability of Heat Transfer Fluids |
| ASTM D 5599 : 2022 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection |
| ASTM D 8074 : 2022 | Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine |
| ASTM D 6224 : 2022 | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| ASTM D 6709 : 2022 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine) |
| ASTM D 7422 : 2022 | Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine |
| ASTM D 5966 : 2022 | Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine |
| ASTM D 8256 : 2022 : REV A | Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions |
| ASTM D 6081 : 2022 | Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation |
| ASTM D 7216 : 2022 | Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers |
| ASTM D 4815 : 2022 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography |
| ASTM D 7501 : 2022 | Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel Fuel Blendstock (B100) by Cold Soak Filtration Test (CSFT) |
| ASTM D 6731 : 2022 | Standard Test Method for<!--ask about discussion in biodegradation def (keep?)--> Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer |
| ASTM D 4054 : 2022 | Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives |
| ASTM D 7795 : 2015 : R2022 : EDT 1 | Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration |
| ASTM D 381 : 2022 | Standard Test Method for Gum Content in Fuels by Jet Evaporation |
| ASTM D 8047 : 2019 : EDT 1 | Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine |
| ASTM D 7320 : 2018 : EDT 1 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine |
| ASTM D 8321 : 2022 | Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements |
| ASTM D 8048 : 2021 : REV A : EDT 1 | Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine |
| ASTM D 6984 : 2018 : EDT 1 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine |
| ASTM D 6593 : 2018 : EDT 1 | Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions |
| ASTM D 4057 : 2022 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 7589 : 2016 : EDT 1 | Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine<rangeref></rangeref > |
| ASTM D 8111 : 2021 : REV A : EDT 1 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine |
| ASTM D 8226 : 2021 : REV A : EDT 1 | Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine<rangeref></rangeref > |
| ASTM G 40 : 2022 | Standard Terminology Relating to Wear and Erosion |
| ASTM D 7468 : 2022 | Standard Test Method for Cummins ISM Test |
| ASTM D 2711 : 2017 | Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
| ASTM D 8165 : 2022 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions |
| ASTM D 1657 : 2022 | Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer |
| ASTM D 473 : 2022 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D 8183 : 2022 | Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method |
| ASTM D 2983 : 2022 | Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer |
| ASTM F 2489 : 2006 : R2022 | Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases |
| ASTM D 7863 : 2022 | Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids |
| ASTM D 8275 : 2022 | Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines |
| ASTM D 4378 : 2022 | Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines |
| ASTM D 4860 : 2022 | Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating) |
| ASTM D 8210 : 2022 | Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer |
| ASTM D 3238 : 2022 : REV A | Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method |
| ASTM D 2532 : 2022 | Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants |
| ASTM D 4539 : 2022 | Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT) |
| ASTM D 6890 : 2022 | Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber |
| ASTM D 8092 : 2022 | Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer |
| ASTM D 7961 : 2022 | Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure |
| ASTM D 6299 : 2022 : EDT 1 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
| ASTM D 7215 : 2022 | Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels |
| ASTM D 6971 : 2022 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 8144 : 2022 | Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography |
| ASTM D 6203 : 2022 | Standard Test Method for Thermal Stability of Way Lubricants |
| ASTM D 3342 : 2022 | Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water |
| ASTM D 6557 : 2018 : EDT 1 | Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils |
| ASTM D 8111 : 2022 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine |
| ASTM D 7566 : 2022 : REV A | Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons |
| ASTM D 5763 : 2022 : REV A | Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware |
| ASTM D 8003 : 2022 | Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography |
| ASTM D 7873 : 2022 : REV A | Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method) |
| ASTM D 8368 : 2022 : REV A | Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV) |
| ASTM D 4814 : 2022 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 1655 : 2022 : REV A | Standard Specification for Aviation Turbine Fuels |
| ASTM G 40 : 2022 : REV A | Standard Terminology Relating to Wear and Erosion |
| ASTM D 2711 : 2022 | Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
| ASTM D 4310 : 2022 : REV A | Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils |
| ASTM D 6299 : 2022 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
| ASTM D 3948 : 2022 | Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer |
| ASTM D 6468 : 2022 | Standard Test Method for High Temperature Stability of Middle Distillate Fuels |
| ASTM D 3831 : 2022 | Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy |
| ASTM D 7757 : 2022 | Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 909 : 2022 | Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline |
| ASTM D 7619 : 2022 | Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter |
| ASTM D 7548 : 2022 | Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products |
| ASTM D 8150 : 2022 | Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography |
| ASTM D 8112 : 2022 | Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid |
| ASTM D 6296 : 2022 | Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography |
| ASTM D 7528 : 2022 | Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus |
| ASTM D 8148 : 2022 | Standard Test Method for Spectroscopic Determination of Haze in Fuels |
| ASTM D 8396 : 2022 | Standard Test Method for Group Types Quantification of Hydrocarbons in Hydrocarbon Liquids with a Boiling Point between 36 °C and 343 °C by Flow Modulated GCxGC – FID |
| ASTM D 4052 : 2022 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 3237 : 2022 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
| ASTM D 3228 : 2022 | Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method |
| ASTM D 3343 : 2022 | Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels |
| ASTM D 8128 : 2022 | Standard Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings |
| ASTM D 6021 : 2022 | Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.