ASTM D 4150 : 2023 : REV A
Current
Current
The latest, up-to-date edition.
Standard Terminology Relating to Gaseous Fuels
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
12-07-2023
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 03
|
| DocumentType |
Reference Material
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This terminology standard covers the compilation of terminology developed by Committee D03 on Gaseous Fuels. It does not include terms, definitions, abbreviations, acronyms, and symbols specific to only a single D03 standard in which they appear. These terms, definitions, abbreviations, acronyms, and symbols are used in:
1.1.1The sampling of gaseous fuels,
1.1.2The analysis of gaseous fuels for composition and various other physical properties, and
1.1.3Other practices related to the processing, transmission, and distribution of gaseous fuels.
1.2This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 8080 : 2021 | Standard Specification for Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) Used as a Motor Vehicle Fuel |
| ASTM D 7650 : 2021 | Standard Practice for Sampling of Particulate Matter in High Pressure Gaseous Fuels with an In-Stream Filter |
| ASTM D 7941/D7941M : 2023 | Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer |
| ASTM D 7606 : 2017 | Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases |
| ASTM D 1988 : 2020 | Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes |
| ASTM D 1072 : 2023 | Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration |
| ASTM D 7892 : 2022 | Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry |
| ASTM D 7165 : 2022 | Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels |
| ASTM D 5504 : 2020 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASTM D 7314 : 2021 | Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling |
| ASTM D 6273 : 2020 | Standard Test Method for Natural Gas Odor Intensity |
| ASTM D 7493 : 2022 | Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection |
| ASTM D 7651 : 2017 | Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel |
| ASTM D 8221 : 2023 | Standard Practice for Determining the Calculated Methane Number (MN<inf>C</inf>) of Gaseous Fuels Used in Internal Combustion Engines |
| ASTM D 4084 : 2023 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
| ASTM D 8455 : 2022 | Standard Test Method for Speciated Siloxane GC-IMS Analyzer Based On-line for Siloxane and Trimethylsilanol Content of Gaseous Fuels |
| ASTM D 7940 : 2021 | Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy |
| ASTM D 4984 : 2020 | Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes |
| ASTM D 5954 : 2022 : REV A | Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy |
| ASTM D 4784 : 2023 | Standard Specification for Liquefied Natural Gas Density Calculation Models |
| ASTM D 4810 : 2020 | Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes |
| ASTM D 7164 : 2021 | Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography |
| ASTM D 7675 : 2022 | Standard Test Method for Determination of Total Hydrocarbons in Hydrogen by FID-Based Total Hydrocarbon (THC) Analyzer |
| ASTM D 4888 : 2020 | Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes |
| ASTM D 7551 : 2010 : R2015 | Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence (Withdrawn 2024) |
| ASTM D 7166 : 2023 | Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels |
| ASTM D 8488 : 2022 | Standard Test Method for Determination of Hydrogen Sulfide (H<inf>2</inf>S) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS) |
| ASTM D 8000 : 2015 : R2020 | Standard Practice for Flow Conditioning of Natural Gas and Liquids |
| ASTM D 4468 : 2023 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<brk/> Rateometric Colorimetry |
| ASTM D 7800/D7800M : 2023 | Standard Test Method for Determination of Elemental Sulfur in Natural Gas |
| ASTM D 7607/D7607M : 2019 | Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method) |
| ASTM D 7904 : 2021 | Standard Test Method for Determination of Water Vapor (Moisture Concentration) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS) |
| ASTM D 1142 : 1995 : R2021 | Standard Test Method for Water Vapor Content of Gaseous Fuels by<brk/> Measurement of Dew-Point Temperature |
| ASTM D 3588 : 1998 : R2017 : EDT 1 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
| ASTM D 4175 : 2024 : EDT 1 | Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants |
| ASTM D 4175 : 2023 | Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants |
| ASTM D 4175 : 2022 : REV A : EDT 1 | Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants |
| ASTM D 4175 : 2023 : EDT 1 | Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants |
| ASTM D 4175 : 2023 : REV A | Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants |
| ASTM D 3588 : 1998 : R2024 : EDT 1 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
| ASTM D 4175 : 2024 | Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.