ASTM D 3925 : 2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
Hardcopy , PDF
11-11-2014
English
10-08-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 06.01, 2017 Specifies methods of taking representative samples of fluid paint or pigmented coating products from containers of any type.
| Committee |
D 01
|
| DocumentType |
Standard Practice
|
| Pages |
3
|
| ProductNote |
Reconfirmed 2002
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This practice describes methods of taking representative samples of fluid paint or pigmented coating products from containers of any type.
1.2 Two ISO standards, ISO 1513 and ISO 15528, cover the details and equipment for sampling of liquid paints and associated materials in much greater detail than this standard. The reader is referred to those standards for more information
1.3 The sampling of dry powder paints, clear coatings, mixed solvents, and nonpigmented materials of any type is not covered in this procedure.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 4287 : 2000 : R2019 | Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer |
| ASTM D 6886 : 2018 | Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography |
| ASTM D 7836 : 2013 | Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials |
| ASTM D 5009 : 2002 : R2017 | Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions |
| ASTM D 5326 : 1994 : REV A : R2013 | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 6904 : 2003 : R2013 | Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
| ASTM F 940 : 1999 : R2013 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM D 7395 : 2018 | Standard Test Method for Cone/Plate Viscosity at a 500 s<sup>-1</sup> Shear Rate |
| ASTM E 1797 : 2012 : R2017 : EDT 1 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 2369 : 2010 : R2015 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 3960 : 2005 : R2018 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM D 4359 : 1990 : R2019 | Standard Test Method for Determining Whether a Material Is a Liquid or a Solid |
| ASTM D 5324 : 2016 | Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM D 8008 : 2015 | Standard Practice for Representative Field Sampling of Traffic Paints |
| ASTM D 6438 : 2005 : R2015 | Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography |
| ASTM D 4948 : 1989 : R2016 | Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid |
| ASTM D 5380 : 1993 : R2014 | Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis |
| ASTM D 7088 : 2017 | Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry |
| ASTM D 7358 : 2007 : R2018 | Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit |
| ASTM D 7867 : 2013 | Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature |
| ASTM D 5327 : 1997 : R2013 | Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions |
| ASTM D 5913 : 1996 : R2013 | Standard Test Method for Evaluation of Cleanability of Paint Brushes |
| ASTM E 1795 : 2017 | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 3730 : 2017 | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM D 8090 : 2017 | Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods |
| ASTM D 5381 : 1993 : R2014 | Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders |
| ASTM D 3720 : 1990 : R2019 | Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction |
| ASTM D 5150 : 1992 : R2017 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
| ASTM D 2697 : 2003 : R2014 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D 4958 : 2010 : R2016 | Standard Test Method for Comparison of the Brush Drag of Latex Paints |
| ASTM D 5498 : 2012 : REV A : R2018 | Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities |
| ASTM D 6577 : 2015 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 7245 : 2009 : R2014 | Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating |
| ASTM D 5895 : 2013 | Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| ASTM D 5125 : 2010 : R2014 | Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups |
| ASTM D 7073 : 2005 : R2012 | Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films |
| ASTM D 6763 : 2016 | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| ASTM D 4764 : 2001 : R2016 | Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint |
| ASTM D 4707 : 2009 : R2017 | Standard Test Method for Measuring Paint Spatter Resistance During Roller Application |
| ASTM D 5286 : 2001 : R2017 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
| ASTM D 4143 : 2016 | Standard Guide for Testing Latex Vehicles |
| SSPC-Paint 39:2015(R2023) | Two-Component Aliphatic Polyurea Topcoat, Fast- or Moderate-Drying, Performance-Based |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ASTM D 1475 : 2013 : REDLINE | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.