ASTM D 3924 : 2016 : R2019
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
Available format(s)
Hardcopy , PDF
Superseded date
10-06-2024
Superseded by
Language(s)
English
Published date
01-06-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This specification defines the standard atmospheres for normal conditioning and testing of paint, varnish, lacquer, and related materials, at approximately ambient conditions.
| Committee |
D 01
|
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification defines the standard atmospheres for normal conditioning and testing of paint, varnish, lacquer, and related materials, at approximately ambient conditions.
Note 1:See Terminology E41, Specification E171 and Test Method E337.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 5007 : 1999 : R2017 | Standard Test Method for Wet-to-Dry Hiding Change |
| ASTM D 5069/D5069M : 2013 | Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings |
| ASTM D 5150 : 1992 : R2017 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
| ASTM D 6489 : 1999 : R2012 | Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating |
| ASTM D 5125 : 2010 : R2014 | Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups |
| ASTM D 6189 : 1997 : R2014 | Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
| ASTM D 7073 : 2005 : R2012 | Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films |
| ASTM D 564 : 1987 : R2017 | Standard Test Methods for Liquid Paint Driers |
| ASTM D 6532 : 2000 : R2014 | Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens |
| ASTM D 4707 : 2009 : R2017 | Standard Test Method for Measuring Paint Spatter Resistance During Roller Application |
| ASTM D 5401 : 2003 : R2014 | Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood |
| ASTM D 4958 : 2010 : R2016 | Standard Test Method for Comparison of the Brush Drag of Latex Paints |
| ASTM D 7488 : 2011 : R2016 | Standard Test Method for Open Time of Latex Paints |
| ASTM D 2134 : 1993 : R2012 | Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker |
| ASTM D 5965 : 2019 | Standard Test Methods for Density of Coating Powders |
| ASTM D 6577 : 2015 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 5895 : 2013 | Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| ASTM D 6736 : 2008 : R2019 | Standard Test Method for Burnish Resistance of Latex Paints |
| ASTM D 5913 : 1996 : R2013 | Standard Test Method for Evaluation of Cleanability of Paint Brushes |
| ASTM E 1795 : 2017 | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 6037 : 2018 | Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 7190 : 2010 : R2015 | Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films |
| ASTM D 6490 : 1999 : R2014 | Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels |
| ASTM G 151 : 2019 | Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources |
| ASTM D 823 : 2018 | Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels |
| ASTM D 7539 : 2010 : R2015 | Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints |
| ASTM E 1797 : 2012 : R2017 : EDT 1 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 6279 : 2015 | Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 3359 : 2017 | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 6900 : 2010 : R2015 | Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate |
| ASTM D 2486 : 2017 | Standard Test Methods for Scrub Resistance of Wall Paints |
| ASTM D 7088 : 2017 | Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry |
| ASTM D 7187 : 2015 | Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching |
| ASTM D 5326 : 1994 : REV A : R2013 | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 2805 : 2011 : R2018 | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 6904 : 2003 : R2013 | Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
| ASTM D 7089 : 2006 : R2014 | Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing |
| ASTM G 147 : 2017 | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
| ASTM D 5068 : 2004 : R2013 | Standard Practice for Preparation of Paint Brushes for Evaluation |
| ASTM D 4060 : 2019 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 564 : 1987 : R2023 | Standard Test Methods for Liquid Paint Driers |
| ASTM D 6189 : 1997 : R2022 | Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
| ASTM D 5913 : 1996(R2019) | Standard Test Method for Evaluation of Cleanability of Paint Brushes |
| ASTM D 2805 : 2011 : R2023 | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 6532 : 2000 : R2022 | Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens |
| ASTM D 5401 : 2003 : R2022 | Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood |
| ASTM D 7088 : 2017 : R2023 | Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry |
| ASTM D 7190 : 2010 : R2023 | Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films<!--Missing unit for values in fn 3 - KF (10/23/23)--><?Pub Caret -1?> |
| ASTM E 1795 : 2020 : REV A | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 5068 : 2004 : R2019 | Standard Practice for Preparation of Paint Brushes for Evaluation |
| ASTM D 4958 : 2024 | Standard Test Method for Comparison of the Brush Drag of Latex Paints |
| ASTM D 6490 : 1999 : R2022 | Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels |
| ASTM D 7187 : 2020 | Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching |
| ASTM D 5125 : 2010 : R2020 : EDT 1 | Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups |
| ASTM D 6279 : 2020 | Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 6489 : 1999 : R2020 | Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating |
| ASTM D 6904 : 2003 : R2022 | Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
| ASTM D 5326 : 2022 | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 6037 : 2021 | Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 7538 : 2009 : R2023 | Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device |
| ASTM D 6900 : 2010 : R2020 | Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate |
| ASTM D 7488 : 2011 : R2024 | Standard Test Method for Open Time of Latex Paints |
| ASTM D 7073 : 2020 | Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films |
| ASTM D 823 : 2018 : R2022 | Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels |
| ASTM D 2134 : 2019 : R2024 | Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker |
| ASTM D 5069/D5069M : 2013 : R2019 | Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings |
| ASTM D 5895 : 2020 | Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| ASTM D 7539 : 2010 : R2020 | Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints |
| ASTM D 4828 : 1994 : R2020 | Standard Test Methods for Practical Washability of Organic Coatings |
| ASTM D 3359 : 2023 | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 6577 : 2015 : R2019 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM E 337 : 2015 : R2023 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM E 337 : 2015 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM E 171 : 1994 : R1998 | Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.