Customer Support: 131 242

  • Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 3856 : 1995 : R2000

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water

Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

01-01-2000

$135.86
Including GST where applicable

Committee
D 19
DocumentType
Guide
Pages
12
ProductNote
Reconfirmed 2000
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

1.1 This guide provides information on consensus good laboratory practices for laboratories that provide services in the sampling and analysis of water. As consensus standards, these are the minimum criteria that all laboratories should consider in establishing their good laboratory practices.

1.2 This guide is designed to be used by those responsible for the selection, operation, or control of laboratory organizations engaged in sampling and analysis of water.

1.3 This guide presents features of organization, facilities, resources, and operations which affect the usefulness of the data generated.

1.4 This guide presents criteria for selection and control of the features described in 1.3 and also makes recommendations for the correction of unacceptable performance.

1.5 This guide describes methodology and practices intended to be completely consistent with the International Organization for Standardization (ISO) 9000 series of standards and Guide 25 - 1990 (1).

1.6 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D 7858 : 2013 : R2018 Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 7728 : 2018 Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance
ASTM D 6146 : 1997 : R2018 Standard Guide for Monitoring Aqueous Nutrients in Watersheds
ASTM D 6328 : 2018 Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
ASTM D 6581 : 2018 Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
ASTM D 5907 : 2018 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
ASTM D 4309 : 2018 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
ASTM D 4840 : 1999 : R2018 : EDT 1 Standard Guide for Sample Chain-of-Custody Procedures
ASTM D 4282 : 2015 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
ASTM D 3694 : 1996 : R2017 Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
ASTM D 5174 : 2007 : R2013 Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry (Withdrawn 2022)
ASTM D 7572 : 2015 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil
ASTM D 4193 : 2008 : R2013 : EDT 1 Standard Test Method for Thiocyanate in Water
ASTM D 6994 : 2015 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection (Withdrawn 2024)
ASTM D 5316 : 1998 : R2017 Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
ASTM D 7365 : 2009 : REV A : R2015 Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
ASTM D 5765 : 2016 Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating
ASTM D 6889 : 2003 : R2017 Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
ASTM D 7284 : 2013 : R2017 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
ASTM D 7979 : 2017 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 6501 : 2015 Standard Test Method for Phosphonate in Brines (Withdrawn 2024)
ASTM D 7644 : 2016 Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 4785 : 2008 : R2013 : EDT 1 Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water
ASTM D 3370 : 2018 Standard Practices for Sampling Water from Flowing Process Streams
ASTM D 5317 : 1998 : R2017 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
ASTM D 4129 : 2005 : R2013 Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
ASTM D 7283 : 2017 Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
ASTM D 4165 : 2006 : R2012 Standard Test Method for Cyanogen Chloride in Water
ASTM D 7597 : 2016 : R2017 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 5241 : 1992 : R2017 Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water
ASTM D 8025 : 2016 Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
ASTM D 7600 : 2016 : R2017 Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 7485 : 2016 Standard Test Method for Determination of Nonylphenol, p-<emph type="bdit">tert</emph >-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 5788 : 1995 : R2017 Standard Guide for Spiking Organics into Aqueous Samples
ASTM D 5542 : 2016 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D 5952 : 2008 : R2015 Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) (Withdrawn 2024)
ASTM D 6888 : 2016 Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
ASTM D 7742 : 2017 Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 5847 : 2002 : R2012 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 6238 : 1998 : R2017 Standard Test Method for Total Oxygen Demand in Water
ASTM D 1971 : 2016 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
ASTM D 5810 : 1996 : R2015 Standard Guide for Spiking into Aqueous Samples
ASTM D 5175 : 1991 : R2017 : EDT 1 Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
ASTM D 8001 : 2016 : EDT 1 Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
ASTM D 7237 : 2018 Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
ASTM D 8024 : 2016 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM D 7599 : 2016 : R2017 Standard Test Method for Determination of Diethanolamine, Triethanolamine, <emph type="ital">N</emph>-Methyldiethanolamine and <emph type="ital">N</emph >-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 7574 : 2016 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 6520 : 2018 Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds
ASTM D 3695 : 1995 : R2013 Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
ASTM D 2580 : 2006 : R2012 Standard Test Method for Phenols in Water by Gas-Liquid Chromatography (Withdrawn 2021)
ASTM D 596 : 2001 : R2018 Standard Guide for Reporting Results of Analysis of Water
ASTM D 5612 : 1994 : R2018 Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
ASTM D 7511 : 2012 : R2017 : EDT 1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D 6919 : 2017 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
ASTM D 7645 : 2016 Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 7598 : 2016 : R2017 Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 7065 : 2017 Standard Test Method for Determination of Nonylphenol, Bisphenol A, <emph type="bdit" >p-tert</emph>-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
ASTM D 7066 : 2004 : R2017 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.