ASTM D 3775 : 2017 : R2023
Current
The latest, up-to-date edition.
Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
Hardcopy , PDF
English
04-08-2023
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 13
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers the measurement of end (warp) and pick (filling) count and is applicable to all types of woven fabrics.
Note 1:Historically, the term fabric count has been used to describe the end and pick count of woven fabrics. The terms end count and pick count are replacing the term fabric count, to provide clarity.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.2.1Throughout this document, there will be some instances in which the units do not convert 1:1. This is to acknowledge that this is a global document and that different parts of the world use different units of measurement. Organizations using the metric system wil report the count per 1 cm. Organizations using the English system will report the count per 1 in.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 2:For a current test method for the wale and course count of weft knitted fabrics, refer to Test Method D8007.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 579/D579M : 2015 | Standard Specification for Greige Woven Glass Fabrics |
| ASTM D 5446 : 2008 : R2019 | Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
| ASTM D 6337 : 1998 : R2019 | Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics |
| ASTM D 3656/D3656M : 2013 : R2021 | Standard Specification for Insect Screening and Louver Cloth Woven from<brk/>Vinyl-Coated Glass Yarns |
| ASTM D 2646 : 2018 | Standard Guide for Backing Fabric Characteristics of Pile Yarn Floor Coverings |
| ASTM D 6674 : 2001 : R2017 | Standard Guide for Proficiency Test Program for Fabrics |
| ASTM D 7507 : 2014 | Standard Specification for Woven High Stretch Fabrics Used in Apparel |
| ASTM D 4389/D4389M : 2016 | Standard Specification for Finished Glass Fabrics Woven From Rovings |
| ASTM D 4028/D4028M : 2013 : R2021 | Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn |
| ASTM D 4029/D4029M : 2016 | Standard Specification for Finished Woven Glass Fabrics |
| ASTM D 580/D580M : 2015 | Standard Specification for Greige Woven Glass Tapes and Webbings |
| ASTM D 1464 : 2012 : R2019 | Standard Practice for Differential Dyeing Behavior of Cotton |
| ASTM D 173/D173M : 2003 : R2018 | Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing |
| ASTM D 4850 : 2013 : R2017 : EDT 1 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 1668/D1668M : 1997 : REV A : R2021 | Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing |
| ASTM D 123 : 2019 | Standard Terminology Relating to Textiles |
| ASTM D 4850 : 2013 : R2017 : EDT 1 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 4850 : 2023 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 123 : 2023 | Standard Terminology Relating to Textiles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.