ASTM D 3666 : 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
Hardcopy , PDF
11-11-2014
English
01-12-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 04
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This specification covers the minimum requirements for field and laboratory personnel, for establishing and maintaining a quality system, and establishes minimum qualifications for agencies engaged in the testing and inspection of road and paving materials.
1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on road and paving materials, and for establishing guidelines pertaining to an agency's organization, personnel, facilities, and quality system. This specification may be supplemented by more specific criteria, such as that in Specification E329, and requirements for particular projects.
1.3 This specification can be used as a basis to evaluate testing or inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private, engaged in the testing and inspection of road and paving materials.
1.4 Accreditation is required to comply with this standard. (See 8.1.5.)
1.5 The users of the accredited agency must review the agency's scope of accreditation to ensure the agency has been accredited for its technical competence to perform the tasks requested by the user.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 2872 : 2019 | Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) |
| ASTM D 139 : 2016 | Standard Test Method for Float Test for Bituminous Materials |
| ASTM D 7115 : 2010 : R2015 | Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
| ASTM D 3744/D3744M : 2018 | Standard Test Method for Aggregate Durability Index |
| ASTM D 7552 : 2009 : R2014 | Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer |
| ASTM D 7196 : 2018 | Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples |
| ASTM D 2042 : 2015 | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
| ASTM D 75/D75M : 2014 | Standard Practice for Sampling Aggregates |
| ASTM D 3042 : 2017 | Standard Test Method for Insoluble Residue in Carbonate Aggregates |
| ASTM D 8237 : 2018 | Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures With the Four-Point Beam Fatigue Device |
| ASTM D 3143/D3143M : 2019 | Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus |
| ASTM D 7981 : 2015 | Standard Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor |
| ASTM D 70 : 2018 : REV A | Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method) |
| ASTM D 7906 : 2014 | Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator |
| ASTM D 5404/D5404M : 2012 : R2017 | Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator |
| ASTM D 7495 : 2012 : R2019 | Standard Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 6752/D6752M : 2018 | Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method |
| ASTM D 1560 : 2015 | Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus (Withdrawn 2024) |
| ASTM D 3319 : 2011 : R2017 | Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel |
| ASTM D 7064/D7064M : 2008 : R2013 | Standard Practice for Open-Graded Friction Course (OGFC) Mix Design |
| ASTM D 1461 : 2017 | Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures |
| ASTM D 8079 : 2016 | Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor |
| ASTM D 6521 : 2019 | Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) |
| ASTM D 8225 : 2019 | Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature |
| ASTM D 7369 : 2011 | Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test (Withdrawn 2020) |
| ASTM D 7313 : 2013 | Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry |
| ASTM D 5801 : 2017 | Standard Test Method for Toughness and Tenacity of Asphalt Materials |
| ASTM D 7113/D7113M : 2010 : R2016 | Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods |
| ASTM D 2170/D2170M : 2018 | Standard Test Method for Kinematic Viscosity of Asphalts |
| ASTM D 3740 : 2012 : REV A | Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 2419 : 2014 | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
| ASTM D 4957 : 2018 | Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer |
| ASTM D 2171/D2171M : 2018 | Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer |
| ASTM D 2041/D2041M : 2019 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures |
| ASTM D 8078 : 2018 | Standard Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues |
| ASTM D 113 : 2017 | Standard Test Method for Ductility of Asphalt Materials |
| ASTM D 8055 : 2017 | Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards |
| ASTM E 329 : 2018 | Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection |
| ASTM D 6927 : 2015 | Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures |
| ASTM D 7370/D7370M : 2014 | Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion |
| ASTM D 4792/D4792M : 2013 : R2019 | Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions |
| ASTM D 7870/D7870M : 2013 | Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure |
| ASTM D 1754/D1754M : 2009 : R2014 | Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) |
| ASTM D 2172/D2172M : 2017 : EDT 1 | Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures |
| ASTM D 6931 : 2017 | Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures |
| ASTM D 7227/D7227M : 2017 | Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus |
| ASTM D 6926 : 2016 | Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
| ASTM D 3549/D3549M : 2018 | Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens |
| ASTM D 3203/D3203M : 2017 | Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures |
| ASTM D 1561/D1561M : 2013 | Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor (Withdrawn 2022) |
| ASTM D 6857/D6857M : 2018 | Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method |
| ASTM D 1074 : 2017 | Standard Test Method for Compressive Strength of Asphalt Mixtures |
| ASTM D 6936 : 2017 | Standard Test Method for Determining Demulsibility of Emulsified Asphalt |
| ASTM D 6932/D6932M : 2008 : R2013 | Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures |
| ASTM D 7063/D7063M : 2018 | Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples |
| ASTM D 3387 : 2011 | Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) (Withdrawn 2020) |
| ASTM D 6925 : 2015 | Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor |
| ASTM D 7553 : 2015 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
| ASTM D 5361/D5361M : 2016 | Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing |
| ASTM D 2726/D2726M : 2019 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures |
| ASTM D 5/D5M : 2019 | Standard Test Method for Penetration of Bituminous Materials |
| ASTM D 6933 : 2018 | Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) |
| ASTM D 8044 : 2016 | Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.