ASTM D 3612 : 2002 : R2017
Current
The latest, up-to-date edition.
Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
Hardcopy , PDF
English
15-11-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 10.03, 2017 Describes three procedures for extraction and measurement of gases dissolved in electrical insulating oil having a viscosity of 20 cSt (100 SUS) or less at 40 degrees C (104 degrees F), and the identification and determination of the individual component gases extracted.
| Committee |
D 27
|
| DocumentType |
Test Method
|
| Pages |
22
|
| ProductNote |
Reconfirmed 2017
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers three procedures for extraction and measurement of gases dissolved in electrical insulating oil having a viscosity of 20 cSt (100 SUS) or less at 40°C (104°F), and the identification and determination of the individual component gases extracted. Other methods have been used to perform this analysis.
1.2The individual component gases that may be identified and determined include:
| Hydrogen—H2 | |
| Oxygen—O2 | |
| Nitrogen—N2 | |
| Carbon monoxide—CO | |
| Carbon dioxide—CO2 | |
| Methane—CH4 | |
| Ethane—C2H6 | |
| Ethylene—C2H4 | |
| Acetylene—C2H2 | |
| Propane—C3H8 | |
| Propylene—C3H6 |
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements see 6.1.8, 30.2.2 and 30.3.1.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 3284 : 2005 : R2011 | Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters |
| ASTM D 117 : 2018 | Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids |
| ASTM E 800 : 2014 | Standard Guide for Measurement of Gases Present or Generated During Fires |
| ASTM D 7150 : 2013 | Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress |
| ASTM D 5282 : 2005 : R2012 | Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation |
| ASTM D 923 : 2015 | Standard Practices for Sampling Electrical Insulating Liquids |
| ASTM D 5837 : 2015 | Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC) |
| ASTM D 2780 : 1992 : R2007 | Standard Test Method for Solubility of Fixed Gases in Liquids (Withdrawn 2010) |
| ASTM D 2779 : 1992 : R2002 | Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids |
| ASTM D 2140 : 1997 | Standard Test Method for Carbon-Type Composition of Insulating Oils of Petroleum Origin |
| ASTM D 2779 : 1992 : R1997 | Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids |
| ASTM D 3613 : 1998 | Standard Practice for Sampling Insulating Liquids for Gas Analysis and Determination of Water Content (Withdrawn 2007) |
| ASTM D 2779 : 1992 : R2007 | Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids |
| ASTM D 2300 : 2008 | Standard Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method) |
| ASTM D 2780 : 1992 : R1997 | Standard Test Method for Solubility of Fixed Gases in Liquids |
| ASTM D 2300 : 2008 : R2017 | Standard Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method) |
| ASTM E 260 : 1996 | Standard Practice for Packed Column Gas Chromatography |
| ASTM D 2140 : 2008 | Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin |
| IEC 60567:2011 | Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance |
| ASTM D 2779 : 1992 : R2012 | Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids |
| ASTM D 2780 : 1992 : R2002 : EDT 1 | Standard Test Method for Solubility of Fixed Gases in Liquids |
| ASTM D 4051 : 1999 | Standard Practice for Preparation of Low-Pressure Gas Blends |
| ASTM D 2140 : 2008 : R2017 | Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin |
| ASTM D 4051 : 2010 | Standard Practice for Preparation of Low-Pressure Gas Blends |
| IEEE C57.104-2008 | IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
| ASTM D 4051 : 2010 : R2021 | Standard Practice for Preparation of Low-Pressure Gas Blends |
| ASTM D 2140 : 2024 | Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin |
| ASTM D 4051 : 2010 : R2015 | Standard Practice for Preparation of Low-Pressure Gas Blends |
| ASTM D 2140 : 2023 : EDT 1 | Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin |
| ASTM D 2300 : 2000 | Standard Test Method for Gassing of Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method) |
| ASTM D 2140 : 2023 | Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin |
| ASTM D 2140 : 2003 | Standard Test Method for Carbon-Type Composition of Insulating Oils of Petroleum Origin |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.