ASTM D 3585 : 2008 : R2020
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for ASTM Reference Fluid for Coolant Tests
Hardcopy , PDF
30-03-2024
English
20-01-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 15
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers a reference ethylene glycol-base test fluid to be used in providing base line data for ASTM coolant test procedures.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 1881 : 2017 | Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware |
| ASTM D 6208 : 2007 : R2014 | Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
| ASTM D 4725 : 2015 | Standard Terminology for Engine Coolants and Related Fluids |
| ASTM D 5828 : 1997 : R2018 | Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates |
| ASTM D 4725 : 2015 : R2023 | Standard Terminology for Engine Coolants and Related Fluids |
| ASTM D 6208 : 2007 : R2020 | Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
| ASTM D 5828 : 1997 : R2023 | Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates |
| ASTM D 1122 : 2016 : R2017 : EDT 1 | Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 1177 : 2017 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 1122 : 2020 | Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 501 : 1989 : R1998 | Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents (Withdrawn 2001) |
| ASTM D 1287 : 2011 : R2020 | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 1384 : 2024 | Standard Test Method for Corrosion Test for Engine Coolants in Glassware |
| ASTM D 1122 : 2022 | Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 501 : 2003 : R2023 | Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
| ASTM D 1123 : 2022 : REV A | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 1119 : 2005 : R2015 | Standard Test Method for Percent Ash Content of Engine Coolants |
| ASTM D 1123 : 2022 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 1121 : 2011 : R2020 | Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts |
| ASTM D 1123 : 1999 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 5827 : 2022 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 501 : 2003 : R2016 | Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
| ASTM D 1123 : 1999 : R2015 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 1119 : 2022 | Standard Test Method for Percent Ash Content of Engine Coolants |
| ASTM D 3634 : 2021 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 1384 : 2005 : R2019 | Standard Test Method for Corrosion Test for Engine Coolants in Glassware |
| ASTM D 3634 : 1999 : R2015 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 1613 : 2017 : R2023 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM D 1120 : 2017 | Standard Test Method for Boiling Point of Engine Coolants |
| ASTM D 5827 : 2009 : R2015 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 1177 : 2022 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 5931 : 2013 : R2017 | Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
| ASTM D 1613 : 2017 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM D 1120 : 2022 | Standard Test Method for Boiling Point of Engine Coolants |
| ASTM D 5931 : 2020 | Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.