ASTM D 3559 : 2015
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Standard Test Methods for Lead in Water (Withdrawn 2024)
Available format(s)
Hardcopy , PDF
Withdrawn date
12-01-2024
Language(s)
English
Published date
31-12-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.These test methods cover the determination of dissolved and total recoverable lead in water and waste water by atomic-absorption spectrophotometry2 and differential pulse anodic stripping voltammetry
| Committee |
D 19
|
| DocumentType |
Test Method
|
| Pages |
19
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Withdrawn
|
| Supersedes |
1.1These test methods cover the determination of dissolved and total recoverable lead in water and waste water by atomic-absorption spectrophotometry2 and differential pulse anodic stripping voltammetry. Four test methods are included as follows:
| Concentration | | |
| Test Method A—Atomic Absorption, Direct | 1.0 to 10 mg/L | 7 to 15 |
| Test Method B—Atomic Absorption, | 100 to 1000 μg/L | 16 to 24 |
| Test Method C—Differential Pulse Anodic | 1 to 100 μg/L | 25 to 35 |
| Test Method D—Atomic Absorption, | 5 to 100 μg/L | 36 to 44 |
1.2Test Method B can be used to determine lead in brines. Test Method D has been used successfully with reagent water, lake water, well water, filtered tap water, condensate from a medium Btu coal gasification process, waste treatment plant effluent, and a production plant process water.
1.3It is the user's responsibility to ensure the validity of these test methods for waters of untested matrices.
1.4The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements, see Note 3, 11.3, 11.4, 11.8.1, 21.8, 21.9, 21.12, 23.7, 23.10, 32.2.1, and 33.1.
| ASTM F 1581 : 2008 : R2016 | Standard Specification for Composition of Anorganic Bone for Surgical Implants |
| ASTM D 4309 : 2018 | Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water |
| ASTM D 4382 : 2018 | Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace |
| ASTM D 1687 : 2017 | Standard Test Methods for Chromium in Water |
| ASTM D 8006 : 2016 | Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations |
| ASTM D 857 : 2017 | Standard Test Method for Aluminum in Water |
| ASTM D 3557 : 2017 | Standard Test Methods for Cadmium in Water |
| ASTM D 1886 : 2014 | Standard Test Methods for Nickel in Water |
| ASTM D 1691 : 2017 | Standard Test Methods for Zinc in Water |
| ASTM D 3645 : 2015 | Standard Test Methods for Beryllium in Water |
| ASTM D 858 : 2017 | Standard Test Methods for Manganese in Water |
| ASTM D 1971 : 2016 | Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry |
| ASTM D 3558 : 2015 | Standard Test Methods for Cobalt in Water |
| ASTM D 1068 : 2015 | Standard Test Methods for Iron in Water (Withdrawn 2024) |
| ASTM D 1688 : 2017 | Standard Test Methods for Copper in Water |
| ASTM F 1581 : 2008 : R2020 | Standard Specification for Composition of Anorganic Bone for Surgical Implants |
| ASTM D 3645 : 2015 : R2023 | Standard Test Methods for Beryllium in Water |
| ASTM D 1971 : 2016 : R2021 : EDT 1 | Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry |
| ASTM D 1687 : 2002 | Standard Test Methods for Chromium in Water |
| ASTM D 4841 : 1988 : R2008 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 1691 : 2017 | Standard Test Methods for Zinc in Water |
| ASTM D 5673 : 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry |
| ASTM D 3919 : 2015 | Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry (Withdrawn 2024) |
| ASTM D 1691 : 1990 | Standard Test Methods for Zinc in Water |
| ASTM D 5810 : 1996 : R2021 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 3370 : 1995 : REV A : R2003 : EDT 1 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 1129 : 2003 | Standard Terminology Relating to Water |
| ASTM D 1691 : 1995 | Standard Test Methods for Zinc in Water |
| ASTM D 1688 : 2002 | Standard Test Methods for Copper in Water |
| ASTM D 1688 : 2012 | Standard Test Methods for Copper in Water |
| ASTM D 1068 : 2005 : EDT 1 | Standard Test Methods for Iron in Water |
| ASTM D 4841 : 1988 : R2018 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 1129 : 2013 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2013 : R2020 | Standard Terminology Relating to Water |
| ASTM D 5847 : 1999 : REV A : EDT 1 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 1687 : 1992 : R1996 | Standard Test Methods for Chromium in Water |
| ASTM D 5810 : 1996 : R2011 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 2777 : 2012 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 3557 : 2002 : R2007 : EDT 1 | Standard Test Methods for Cadmium in Water |
| ASTM D 3919 : 2004 | Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 4841 : 1988 : R1998 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 5847 : 2002 : R2007 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 858 : 1995 | Standard Test Methods for Manganese in Water |
| ASTM D 5810 : 1996 : R2001 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 5673 : 2015 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
| ASTM D 1886 : 2014 | Standard Test Methods for Nickel in Water |
| ASTM D 1129 : 2006 | Standard Terminology Relating to Water |
| ASTM D 2777 : 2003 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
| ASTM D 2777 : 2021 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 4841 : 1988 : R2003 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 1066 : 2018 | Standard Practice for Sampling Steam |
| ASTM D 3370 : 2010 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 5673 : 2016 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
| ASTM D 1687 : 2002 : R2007 : EDT 1 | Standard Test Methods for Chromium in Water |
| ASTM D 3558 : 2008 | Standard Test Methods for Cobalt in Water |
| ASTM D 2777 : 2013 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 1066 : 2006 | Standard Practice for Sampling Steam |
| ASTM E 275 : 2008 : R2013 | Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers |
| ASTM D 4841 : 1988 : R2013 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM E 275 : 2008 : R2022 | Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers |
| ASTM D 3557 : 2017 | Standard Test Methods for Cadmium in Water |
| ASTM D 5847 : 2002 : R2012 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 1066 : 2018 : EDT 1 | Standard Practice for Sampling Steam |
| ASTM D 5673 : 1996 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
| ASTM D 2777 : 1998 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
| ASTM D 1129 : 2013 : R2020 : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 3370 : 2008 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
| ASTM E 60 : 2011 : R2016 | Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry |
| ASTM D 1129 : 2006 : REV A | Standard Terminology Relating to Water |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 3558 : 1994 : R1998 | Standard Test Methods for Cobalt in Water |
| ASTM D 1687 : 1992 | Standard Test Methods for Chromium in Water |
| ASTM D 1691 : 2012 | Standard Test Methods for Zinc in Water |
| ASTM D 5847 : 2002 : R2020 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 1129 : 2003 : REV A | Standard Terminology Relating to Water |
| ASTM D 1129 : 2002 | Standard Terminology Relating to Water |
| ASTM D 1688 : 1990 | Standard Test Methods for Copper in Water |
| ASTM D 1687 : 2017 | Standard Test Methods for Chromium in Water |
| ASTM D 1066 : 1997 : R2001 | Standard Practice for Sampling Steam |
| ASTM D 5810 : 1996 : R2006 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 1068 : 2003 | Standard Test Methods for Iron in Water |
| ASTM D 3558 : 2003 | Standard Test Methods for Cobalt in Water |
| ASTM D 1688 : 1995 | Standard Test Methods for Copper in Water |
| ASTM D 1687 : 2012 | Standard Test Methods for Chromium in Water |
| ASTM D 3919 : 2008 | Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry |
| ASTM D 3557 : 1990 | Standard Test Methods for Cadmium in Water |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 5673 : 2003 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
| ASTM D 3558 : 2015 | Standard Test Methods for Cobalt in Water |
| ASTM D 1066 : 2011 | Standard Practice for Sampling Steam |
| ASTM D 1129 : 2004 | Standard Terminology Relating to Water |
| ASTM D 5673 : 2010 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry |
| ASTM D 5847 : 2022 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 2777 : 2008 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 1691 : 2002 | Standard Test Methods for Zinc in Water |
| ASTM D 1691 : 2002 : R2007 : EDT 1 | Standard Test Methods for Zinc in Water |
| ASTM D 1688 : 2017 | Standard Test Methods for Copper in Water |
| ASTM D 2777 : 2006 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 3557 : 2012 | Standard Test Methods for Cadmium in Water |
| ASTM D 3557 : 2002 | Standard Test Methods for Cadmium in Water |
| ASTM D 3370 : 2018 | Standard Practices for Sampling Water from Flowing Process Streams |
| ASTM D 1886 : 2008 | Standard Test Methods for Nickel in Water |
| ASTM D 1129 : 2002 : REV A | Standard Terminology Relating to Water |
| ASTM D 1886 : 2014 : R2021 : EDT 1 | Standard Test Methods for Nickel in Water |
| ASTM D 5847 : 2002 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 1068 : 2010 | Standard Test Methods for Iron in Water |
| ASTM D 3919 : 1999 | Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry |
| ASTM D 3370 : 1976 | Standard Practices for Sampling Water |
| ASTM D 1068 : 2015 | Standard Test Methods for Iron in Water (Withdrawn 2024) |
| ASTM E 60 : 2011 : R2022 : EDT 1 | Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry |
| ASTM D 1886 : 1994 : R1998 | Standard Test Methods for Nickel in Water |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1886 : 2003 | Standard Test Methods for Nickel in Water |
| ASTM D 4841 : 1988 : R2013 : EDT 1 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 3557 : 1995 | Standard Test Methods for Cadmium in Water |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 3370 : 1995 : REV A : R1999 : EDT 1 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 5673 : 2002 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
| ASTM D 1068 : 1996 | Standard Test Methods for Iron in Water |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 1129 : 2010 | Standard Terminology Relating to Water |
| ASTM D 5810 : 1996 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 3370 : 2007 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 1129 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2001 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2004 : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 2777 : 2008 : EDT 1 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 5810 : 1996 : R2015 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 3558 : 2015 : R2023 | Standard Test Methods for Cobalt in Water |
| ASTM D 1688 : 2007 | Standard Test Methods for Copper in Water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.