ASTM D 3183 : 201
NA
NA
Status of Standard is Unknown
PRACTICE FOR RUBBER - PREPARATION OF PIECES FOR TEST PURPOSES FROM PRODUCTS
Published date
01-01-2015
Sorry this product is not available in your region.
CONTAINED IN VOL. 09.01, 2016 Defines methods for the preparation of pieces of a rubber vulcanizate that is not in the form of sheet.
| Committee |
D 11
|
| DevelopmentNote |
Supersedes ASTM D 15. (02/2002)
|
| DocumentType |
Standard
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
NA
|
| SupersededBy | |
| Supersedes |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| MIL PRF 11891 : F | TRACK SHOE SETS, TRACK SHOE ASSEMBLIES, TRACK SHOE PADS AND TRACK SHOE BUSHINGS, VEHICULAR - ELASTOMERIZED |
| ASTM D 6284 : 2017 : REDLINE | Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine |
| MIL-DTL-11891 Revision G:1998 | TRACK SHOE SETS, TRACK SHOE ASSEMBLIES, TRACK SHOE PADS AND TRACK SHOE BUSHINGS, VEHICULAR: ELASTOMERIZED |
| ASTM D 2628 : 1991 : R2005 | Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements |
| ASTM D 3032 : 2016 : REDLINE | Standard Test Methods for Hookup Wire Insulation |
| ASTM D 624 : 2000 : EDT 1 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D 3832 : 1979 : R2011 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| AASHTO M 251 : 2006 | SPECIFICATION FOR PLAIN AND LAMINATED ELASTOMERIC BRIDGE BEARINGS |
| ASTM D 1456 : 1986 : R2005 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
| IEEE DRAFT 1493 : D8 2006 | EVALUATION OF SOLVENTS USED FOR CLEANING ELECTRICAL CABLES AND ACCESSORIES |
| ASTM D 454 : 2004 : R2010 | Standard Test Method for Rubber Deterioration by Heat and Air Pressure |
| ASTM D 2628 : 1991 : R2016 | Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements |
| ASTM D 3052 : 1987 : R1996 | Standard Practice for Rating Water-Emulsion Floor Polishes |
| ASTM D 624 : 2000 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 750 : 2012 | Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
| ASTM D 413 : 1998 | Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate |
| ASTM E 1612 : 1994 : R2000 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM D 380 : 1994 : R2012 | Standard Test Methods for Rubber Hose |
| ASTM E 1612 : 1994 : R2005 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM D 380 : 1994 : R2006 | Standard Test Methods for Rubber Hose |
| ASTM D 2000 : 2012 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM F 1909 : 1998 : R2004 | Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets |
| ASTM D 378 : 2010 : R2016 | Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type |
| ASTM E 1783 : 1996 : R2005 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM D 3903 : 2015 : REDLINE | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
| ASTM D 3832 : 1979 : R2006 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| MIL T 11891 : E | TRACK SHOE ASSEMBLY, TRACK SHOE SETS, TRACK SHOE PADS, & TRACK SHOE BUSHINGS, VEHICULAR, ELASTOMERIZED |
| SAE J18_200204 | Sponge and Expanded Cellular Rubber Products1 |
| ASTM D 430 : 2006 : EDT 1 | Standard Test Methods for Rubber Deterioration-Dynamic Fatigue |
| ASTM E 1783 : 1996 : R2000 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| MIL B 17901 : B | BEARING COMPONENTS, BONDED SYNTHETIC RUBBER, WATER LUBRICATED |
| ASTM D 4014 : 2003 : R2007 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges |
| ASTM D 1052 : 2009 | Standard Test Method for Measuring Rubber Deterioration-Cut Growth Using Ross Flexing Apparatus |
| ASTM D 624 : 2000 : R2007 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| I.S. EN ISO 10414-2:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD TESTING OF DRILLING FLUIDS - PART 2: OIL-BASED FLUIDS |
| CGSB-21.4 : 1993 | LITHOGRAPHIC BLANKET AND ROLLER WASH SOLVENT |
| ASTM D 573 : 2004 | Standard Test Method for Rubber—Deterioration in an Air Oven |
| ASTM D 1456 : 1986 : R2014 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
| ASTM D 575 : 1991 : R2001 | Standard Test Methods for Rubber Properties in Compression |
| ASTM D 6515 : 2000 : R2009 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ASTM E 1612/E1612M : 1994 : R2017 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM D 3004 : 2008 | Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials |
| ASTM C 1187 : 2015 : REDLINE | Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment |
| ASTM D 575 : 1991 : R1996 | Standard Test Methods for Rubber Properties in Compression |
| ASTM D 3767 : 2003 : R2014 | Standard Practice for Rubber—Measurement of Dimensions |
| ASTM D 430 : 2006 : R2012 | Standard Test Methods for Rubber Deterioration—Dynamic Fatigue |
| ASTM D 3767 : 2003 : R2008 | Standard Practice for Rubber<span class='unicode'>—</span>Measurement of Dimensions |
| ASTM D 1460 : 1986 : R2001 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM F 1909 : 1998 : R2012 | Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets |
| SAE J 2979 : 2012 | TEST METHOD FOR VULCANIZED RUBBER AND THERMOPLASTIC ELASTOMER DETERMINATION OF COMPRESSIVE STRESS RELAXATION (CSR) RESPONSE |
| NFPA 1963 : 2014 | FIRE HOSE CONNECTIONS |
| ASTM D 6515 : 2000 : R2016 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| MIL-DTL-3100 Revision H:1998 | WHEEL ASSEMBLIES, SOLID ELASTOMER TIRED; FOR TRACK LAYING VEHICLES |
| UNI EN ISO 10414-2 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD TESTING OF DRILLING FLUIDS - PART 2: OIL-BASED FLUIDS |
| ASTM D 3038 : 1993 : R1999 | Standard Test Method for Drop Shatter Test for Coke |
| ASTM D 413 : 1998 : R2017 | Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate |
| NACE TM 02 97 : 2017 | EFFECTS OF HIGH-TEMPERATURE, HIGH-PRESSURE CARBON DIOXIDE DECOMPRESSION ON ELASTOMERIC MATERIALS |
| ASTM D 2632 : 2015 : REDLINE | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
| ASTM D 3045 : 1992 : R1997 | Standard Practice for Heat Aging of Plastics Without Load |
| ASTM D 3038 : 1993 : R2010 | Standard Test Method for Drop Shatter Test for Coke |
| SAE J200_201506 | CLASSIFICATION SYSTEM FOR RUBBER MATERIALS |
| ASTM D 413 : 1998 : R2007 | Standard Test Methods for Rubber Property<span class='unicode'>—</span>Adhesion to Flexible Substrate |
| ASTM D 378 : 2010 | Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type |
| ASTM D 1456 : 1986 : R2001 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
| ASTM D 1330 : 2004 : R2015 : EDT 1 | Standard Specification for Rubber Sheet Gaskets |
| ASTM F 1909 : 1998 | Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets |
| ASTM D 7121 : 2005 | Standard Test Method for Rubber Property-Resilience Using Schob Type Rebound Pendulum |
| ASTM D 865 : 2011 | Standard Test Method for Rubber<char: emdash>Deterioration by Heating in Air (Test Tube Enclosure) |
| ASTM D 572 : 2004 : R2015 | Standard Test Method for Rubber—Deterioration by Heat and Oxygen |
| ASTM D 750 : 2012 : R2017 | Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
| ASTM E 1783 : 1996 : R2009 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM D 3004 : 2008 : R2013 | Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials |
| ASTM D 575 : 1991 : R2007 | Standard Test Methods for Rubber Properties in Compression |
| ASTM G 74 : 2013 : REDLINE | Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
| ASTM D 413 : 1998 : R2002 : EDT 1 | Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate |
| ASTM D 380 : 1994 : R2000 | Standard Test Methods for Rubber Hose |
| API RP 13B-2 : 2014 | RECOMMENDED PRACTICE FOR FIELD TESTING OF OIL-BASED DRILLING FLUIDS |
| ASTM D 572 : 2004 : R2009 | Standard Test Method for Rubber-Deterioration by Heat and Oxygen |
| ASTM D 572 : 2004 : R2010 | Standard Test Method for Rubber-Deterioration by Heat and Oxygen |
| ASTM D 1330 : 2004 | Standard Specification for Rubber Sheet Gaskets |
| MIL-DTL-22777 Revision G:1999 | SOLES AND HEELS, RUBBER TRACTION TREAD FOR FOOTWEAR |
| ASTM D 573 : 2004 : R2015 | Standard Test Method for Rubber—Deterioration in an Air Oven |
| MIL H 26521 : J | HOSE ASSEMBLY, NONMETALLIC, FUEL, COLLAPSIBLE, LOW TEMPERATURE WITH NON-REUSABLE COUPLINGS |
| ASTM D 3832 : 1979 : R2001 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM D 3832 : 1979 : R1997 : EDT 1 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM D 573 : 2004 : R2010 | Standard Test Method for Rubber—Deterioration in an Air Oven |
| ASTM D 2628 : 1991 : R2011 | Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements |
| MIL PRF 3100 : F | WHEEL ASSEMBLIES, SOLID ELASTOMER TIRED; FOR TRACK LAYING VEHICLES |
| ASTM D 1056 : 2014 : REDLINE | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
| ASTM D 454 : 2004 : R2015 | Standard Test Method for Rubber Deterioration by Heat and Air Pressure |
| ASTM D 2628 : 1991 : R1998 | Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements |
| ASTM D 7121 : 2005 : R2012 | Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum |
| ASTM D 3771 : 2015 : REDLINE | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
| ASTM D 1460 : 1986 : R2005 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM D 1052 : 2009 : R2014 | Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus |
| ASTM D 430 : 2006 | Standard Test Methods for Rubber Deterioration-Dynamic Fatigue |
| ASTM D 1460 : 1986 : R2014 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM D 624 : 2000 : R2012 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D 3491 : 1992 | Standard Test Methods for Vulcanizable Rubber Tank and Pipe Lining (Withdrawn 1996) |
| ASTM D 3832 : 1979 : R2017 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM E 1783/E1783M : 1996 : R2017 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM D 6515 : 20001 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ISO 10414-2:2011 | Petroleum and natural gas industries Field testing of drilling fluids Part 2: Oil-based fluids |
| EN ISO 10414-2:2011 | Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids (ISO 10414-2:2011) |
| MIL-DTL-17901 Revision C:2005 | Bearing Components, Bonded Synthetic Rubber, Water Lubricated |
| MIL-R-3065 Revision E:1984 | RUBBER, FABRICATED PRODUCT |
| ASTM D 4014 : 2003 : R2012 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges |
| HH-P-151 Revision F:1985 | PACKING; RUBBER-SHEET, CLOTH-INSERT |
| BS EN ISO 10414-2:2011 | Petroleum and natural gas industries. Field testing of drilling fluids Oil-based fluids |
| ASTM D 6515 : 2000 : R2010 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ASTM D 1460 : 1986 : R1997 : EDT 1 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM D 1330 : 2004 : R2010 | Standard Specification for Rubber Sheet Gaskets |
| ASTM E 1612 : 1994 : R2009 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM D 3038 : 1993 : R2004 | Standard Test Method for Drop Shatter Test for Coke |
| ASTM D 572 : 2004 | Standard Test Method for Rubber-Deterioration by Heat and Oxygen |
| ASTM D 3767 : 2003 | Standard Practice for Rubber-Measurement of Dimensions |
| MIL-DTL-26521 Revision L:2014 | Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature with Non-Reusable Couplings |
| MIL-DTL-45301 Revision E:1998 | TREAD ELASTOMER: SOLID TIRE, FOR TRACK LAYING VEHICLES |
| ASTM D 1460 : 1986 : R2010 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM D 575 : 1991 : R2012 | Standard Test Methods for Rubber Properties in Compression |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| IEEE 1493 : 2006 | EVALUATION OF SOLVENTS USED FOR CLEANING ELECTRICAL CABLES AND ACCESSORIES |
| ASTM D 413 : 1998 : R2013 | Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate |
| ASTM D 4014 : 2003 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges |
| ASTM E 1612/E1612M : 1994 : R2013 : EDT 1 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM D 2000 : 2012 : R2017 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM D 4289 : 2014-02 | TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS |
| ASTM D 1456 : 1986 : R2010 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
| ASTM D 3667 : 2016 : REDLINE | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
| ASTM D 3056 : 2005 : R2010 | Standard Test Method for Gel Time of Solventless Varnishes |
| ASTM E 1783/E1783M : 1996 : R2013 : EDT 1 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM D 454 : 2004 | Standard Test Method for Rubber Deterioration by Heat and Air Pressure |
| ASTM D 6515 : 2000 : R2004 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ASTM D 4014 : 2003 : R2018 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges |
| ASTM D 925 : 2014 : REDLINE | Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion) |
| ASTM D 1456 : 1986 : R1996 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
| ASTM D 3182 : 2016 : REDLINE | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.