ASTM D 3107 : 2007 : R2019
Current
The latest, up-to-date edition.
Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
Hardcopy , PDF
English
01-07-2019
These test methods cover the determination of the amount of fabric stretch, fabric growth, and fabric recovery of fabrics woven in whole or in part from stretch yarns after a specified tension and extension.
Committee |
D 13
|
DocumentType |
Test Method
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1These test methods cover the determination of the amount of fabric stretch, fabric growth, and fabric recovery of fabrics woven in whole or in part from stretch yarns after a specified tension and extension.
1.2These test methods are intended for use with woven fabrics exhibiting high stretch (greater than 12 %) and good recovery properties from low tension (up to 360 g/cm or 2 lb/in. of fabric width). When agreed upon, these test methods can be used for fabrics woven in whole or in part from non-stretch yarns that exhibit limits within the stretch characteristics shown above.
1.3These test methods allow the use of two tension options commonly used in the textile industry; 1.35 kg (3 lb) and 1.8 kg (4 lb). Several calculations are included for fabric stretch, fabric growth and fabric recovery, and can be used individually when required by individual specifications.
1.4These test methods should not be used to measure breaking elongation of woven fabrics which is covered in Test Method D5035.
1.5The values stated in either SI units or inch-pound units are to be regarded separately as the standard. Within the text, the inch-pound units are shown in parentheses. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 2594 : 2004 : R2016 | Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power |
ASTM D 7507 : 2014 | Standard Specification for Woven High Stretch Fabrics Used in Apparel |
ASTM D 6554/D6554M : 2014 | Standard Specification for 100 % Cotton Denim Fabrics (Withdrawn 2023) |
ASTM D 7268 : 2014 | Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear |
ASTM D 5035 : 1995 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 4849 : 2013 : EDT 3 | Standard Terminology Related to Yarns and Fibers |
ASTM D 4850 : 2002 | Standard Terminology Relating to Fabric |
ASTM D 4848 : 1998 : R2004 : EDT 1 | Standard Terminology Related to Force, Deformation and Related Properties of Textiles |
ASTM D 4849 : 2020 | Standard Terminology Related to Yarns and Fibers |
ASTM D 4850 : 2000 | Standard Terminology Relating to Fabric |
ASTM D 4849 : 2013 : EDT 2 | Standard Terminology Related to Yarns and Fibers |
ASTM D 4849 : 2002 : REV A | Standard Terminology Relating to Yarns and Fibers |
ASTM D 1776 : 1998 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 4850 : 2002 : REV A | Standard Terminology Relating to Fabric |
ASTM D 4849 : 2013 : R2018 | Standard Terminology Related to Yarns and Fibers |
ASTM D 4849 : 2002 : REV B | Standard Terminology Relating to Yarns and Fibers |
ASTM D 1776 : 1967 : EDT 1 | Standard Method Of Conditioning Textiles And Textile Products For Testing |
ASTM D 4850 : 2003 : REV A : R2007 | Standard Terminology Relating to Fabric |
ASTM D 4849 : 2002 : REV B : R2007 : EDT 2 | Standard Terminology Related to Yarns and Fibers |
ASTM D 4850 : 2008 : EDT 1 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
ASTM D 4850 : 2013 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
ASTM D 4848 : 1998 : R2018 | Standard Terminology Related to Force, Deformation and Related Properties of Textiles |
ASTM D 5035 : 2011 : R2015 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 4849 : 2002 : REV B : EDT 1 | Standard Terminology Relating to Yarns and Fibers |
ASTM D 123 : 2019 | Standard Terminology Relating to Textiles |
ASTM D 4850 : 2012 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
ASTM D 2904 : 1997 | Standard Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed Data |
ASTM D 4849 : 2002 : REV B : R2007 : EDT 1 | Standard Terminology Related to Yarns and Fibers |
ASTM D 1776 : 2004 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 1776 : 2008 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 1776 : 2008 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 4850 : 2013 : R2017 : EDT 1 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
ASTM D 4848 : 1998 | Standard Terminology of Force, Deformation and Related Properties of Textiles |
ASTM D 5035 : 2011 : R2024 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 4850 : 2008 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
ASTM D 5035 : 2011 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 4850 : 2023 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
ASTM D 4850 : 2003 | Standard Terminology Relating to Fabric |
ASTM D 5035 : 2006 : R2008 : EDT 1 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 4850 : 2013 : R2017 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
ASTM D 4850 : 2000 : REV A | Standard Terminology Relating to Fabric |
ASTM D 2904 : 1997 : R2002 | Standard Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed Data (Withdrawn 2008) |
ASTM D 4849 : 2021 | Standard Terminology Related to Yarns and Fibers |
ASTM D 123 : 2023 | Standard Terminology Relating to Textiles |
ASTM D 5035 : 2006 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 2906 : 1997 | Standard Practice for Statements on Precision and Bias for Textiles |
ASTM D 4849 : 2002 : REV B : R2007 | Standard Terminology Relating to Yarns and Fibers |
ASTM D 4850 : 2003 : REV A | Standard Terminology Relating to Fabric |
ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
ASTM D 4849 : 2013 | Standard Terminology Related to Yarns and Fibers |
ASTM D 4849 : 2002 : REV B : R2007 : EDT 3 | Standard Terminology Related to Yarns and Fibers |
ASTM D 4849 : 2013 : EDT 1 | Standard Terminology Related to Yarns and Fibers |
ASTM D 4848 : 1998 : R2004 | Standard Terminology of Force, Deformation and Related Properties of Textiles |
ASTM D 5035 : 2011 : R2019 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 4850 : 2013 : EDT 1 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
ASTM D 4848 : 1998 : R2012 | Standard Terminology Related to Force, Deformation and Related Properties of Textiles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.