ASTM D 3032 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Hookup Wire Insulation
Hardcopy , PDF
04-03-2021
English
29-11-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 09
|
| DocumentType |
Test Method
|
| Pages |
41
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover procedures for testing hookup wire.
1.2For the purposes of these test methods, hookup wire insulation includes all components of the insulation system used on single insulated conductors or an assembly of single insulated conductors such as a cable bundle and harness or flat ribbon cable. The insulating materials include not only the primary insulation over the conductor, but also insulating jackets over shielded constructions.
1.3The test procedures and their locations are as follows:
| Section | |
| Axial Stability (Longitudinal Change) After Thermal Exposure | 21 |
| Bondability of Insulation to Potting Compounds | 19 |
| Capacitance | 9 to 12 |
| Cold Bend Test | 26 |
| Concentricity | 16 |
| Crush Resistance | 20 |
| Dielectric Breakdown Voltage | 5 |
| Dimensions | 15 |
| Dry-Arc Tracking | 29 |
| Dynamic Cut-Through | 22 |
| Fluid Immersion | 23 |
| High Temperature Shock | 24 |
| Insulation-Continuity Proof Tests | 13 |
| Insulation Resistance | 6 |
| Partial Discharge (Corona) Inception and Extinction Voltage | 25 |
| Relative Thermal Life and Temperature Index | 14 |
| Strip Force | 27 |
| Surface Resistance | 7 |
| Tensile Properties | 17 |
| Vertical Flame Test | 18 |
| Voltage Rating of Hook-Up Wire | A2 |
| Voltage Withstand Test | 8 |
| Wet Arc-Tracking | 28 |
1.4The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precaution statements, see 12.2.1, 12.4.1.8, 18.1.3, Note 17, and 25.4.
| ASTM D 8354 : 2020 | Standard Test Method for Flammability of Electrical Insulating Materials Used for Sleeving or Tubing |
| ASTM D 4565 : 2020 | Standard Test Methods for Physical and Environmental Performance Properties of <brk/>Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM D 4565 : 2015 | Standard Test Methods for Physical and Environmental Performance Properties of <brk/>Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM D 2307 : 2007 | Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire |
| ASTM D 5423 : 1993 : R2005 | Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation (Withdrawn 2014) |
| ASTM D 1868 : 2013 | Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems |
| ASTM D 3183 : 2010 | Standard Practice for Rubber<span class='unicode'>—</span>Preparation of Pieces for Test Purposes from Products |
| ASTM D 3636 : 2000 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 2303 : 1997 : R2004 | Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials (Withdrawn 2013) |
| ASTM D 1711 : 2002 | Standard Terminology Relating to Electrical Insulation |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM D 2307 : 2005 | Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire |
| ASTM D 1868 : 2007 | Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems |
| ASTM D 3183 : 2009 | Standard Practice for Rubber<span class='unicode'>—</span>Preparation of Pieces for Test Purposes from Products |
| ASTM D 2307 : 1995 | Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire |
| ASTM D 5374 : 2013 | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 1711 : 2011 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 3636 : 2013 : REV A : EDT 1 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 3638 : 2007 | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ASTM D 3183 : 2010 : R2015 | Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products |
| ASTM D 1711 : 2011 : REV A | Standard Terminology Relating to Electrical Insulation |
| ASTM D 1868 : 1993 : R1998 | Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems (Withdrawn 2007) |
| ASTM D 2303 : 1997 | Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials |
| ASTM D 6054 : 1997 | Standard Practice for Conditioning Electrical Insulating Materials for Testing |
| ASTM D 1711 : 2013 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 2865 : 1995 | Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing |
| ASTM D 3183 : 2007 | Standard Practice for Rubber—Preparation of Product Pieces for Test Purposes from Products |
| ASTM D 5374 : 1993 : R2005 | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 1868 : 2020 | Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems |
| ASTM D 3636 : 2006 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 1711 : 1999 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 2303 : 2013 | Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials |
| ASTM D 3638 : 2012 | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ASTM D 3636 : 2019 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 3636 : 2013 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 5032 : 2011 | Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions |
| ASTM D 1711 : 2014 : REV A | Standard Terminology Relating to Electrical Insulation |
| ASTM D 2865 : 2001 | Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing |
| ASTM D 3638 : 1993 : R1998 | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ASTM D 1711 : 2015 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 1711 : 2014 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 3183 : 1984 : R1998 | Standard Practice for Rubber-Preparation of Pieces for Test Purposes from Products |
| ASTM D 5374 : 1993 : R1999 | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 3636 : 2013 : REV A | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 5032 : 2019 | Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions |
| ASTM D 1711 : 2020 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 3636 : 2011 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 1711 : 2008 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 5032 : 1997 | Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions |
| ASTM D 3183 : 2002 | Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products |
| ASTM D 3183 : 2010 : R2019 | Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products |
| ASTM D 5423 : 1993 : R1999 | Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 2307 : 2001 | Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire |
| ASTM D 5423 : 2014 | Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.