Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 2457 : 2013

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics

Available format(s)

Hardcopy , PDF

Superseded date

11-06-2021

Superseded by

ASTM D 2457 : 2021

Language(s)

English

Published date

11-04-2013

$122.77
Including GST where applicable

1.1 This test method describes procedures for the measurement of gloss of plastic films and solid plastics, both opaque and transparent.

Committee
D 20
DocumentType
Test Method
Pages
6
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This test method describes procedures for the measurement of gloss of plastic films and solid plastics, both opaque and transparent. It contains four separate gloss angles (Note 1):

1.1.160-deg, recommended for intermediate-gloss films,

1.1.220-deg, recommended for high-gloss films,

1.1.345-deg, recommended for intermediate and low-gloss films,

1.1.485-deg, recommended for intermediate and low gloss films, and

1.1.575-deg, recommended for plastic siding and soffit.

Note 1The 85-deg, 75-deg, 60-deg, and 20-deg apparatus and method of measurement duplicate those in Test Method D523 and D3679; those for the 45° procedure are similarly taken from Test Method C346.

1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 2There is no known ISO equivalent to this standard.

ASTM D 8065/D8065M : 2016 Standard Classification System and Basis for Specification for Specifying Plastic Films
ASTM D 7793 : 2017 Standard Specification for Insulated Vinyl Siding
ASTM D 7445 : 2018 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
ASTM F 2097 : 2016 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
ASTM D 4635 : 2016 Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
ASTM D 2103 : 2015 Standard Specification for Polyethylene Film and Sheeting
ASTM D 3679 : 2017 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3981 : 2009 : REV A : R2016 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D 4477 : 2016 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
ASTM E 430 : 2011 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
ASTM D 2673 : 2014 Standard Specification for Oriented Polypropylene Film
ASTM D 4649 : 2003 : R2016 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM D 4649 : 2020 Standard Guide for Use of Stretch Films and Wrapping Application
ASTM F 2097 : 2020 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
ASTM E 430 : 2019 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
ASTM D 7793 : 2020 Standard Specification for Insulated Vinyl Siding
ASTM D 5767 : 2018 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces

ASTM D 3679 : 2006 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM E 1347 : 2006 : R2020 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E 1347 : 2006 : R2015 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 3679 : 2003 : EDT 2 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM E 1347 : 2003 Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
ASTM D 3679 : 2008 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2001 : REV B Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2002 : REV A Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2009 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM E 691 : 2019 : EDT 1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 1347 : 1997 Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
ASTM D 3679 : 2004 : REV A Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM E 1349 : 2006 : R2013 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
ASTM E 1347 : 2006 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM D 3679 : 2004 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2009 : REV A Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2017 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM E 691 : 2009 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 3679 : 2013 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2011 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM E 1349 : 1990 : R1998 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
ASTM E 1349 : 2006 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry
ASTM D 3679 : 1999 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2003 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2004 : REV A : EDT 1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM E 1347 : 2006 : R2011 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM D 3679 : 2005 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2002 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2001 : REV A Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2003 : EDT 1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM E 1349 : 2006 : R2018 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
ASTM D 3679 : 2001 : REV C Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2001 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D 3679 : 2006 : REV A Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more