ASTM D 2414 : 2018 : REV A
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
Available format(s)
Hardcopy , PDF
Superseded date
16-09-2019
Superseded by
Language(s)
English
Published date
01-12-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.This test method covers the determination of the oil absorption number of carbon black.
| Committee |
D 24
|
| DocumentType |
Test Method
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the determination of the oil absorption number of carbon black.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7854 : 2018 : REV C | Standard Test Method for Carbon Black-Void Volume at Mean Pressure |
| ASTM D 3493 : 2018 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 4122 : 2017 : EDT 1 | Standard Practice for Carbon Black—Evaluation of an Industry Reference Black |
| ASTM D 1765 : 2018 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 5817 : 2003 : REV A : R2014 | Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing |
| ASTM D 6915 : 2017 : EDT 1 | Standard Practice for Carbon Black—Evaluation of Standard Reference Blacks |
| ASTM D 7849 : 2018 : REV A | Standard Classification for Nomenclature of Reference Materials of Committee D24 |
| ASTM D 4821 : 2016 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 4821 : 2019 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 3493 : 2019 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 5554 : 1995 : R2006 | Standard Test Method for Determination of the Iodine Value of Fats and Oils |
| ASTM D 1900 : 2006 : R2015 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 4821 : 2014 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 4821 : 2001 : REV A | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 5554 : 1995 : R2011 | Standard Test Method for Determination of the Iodine Value of Fats and Oils |
| ASTM D 1765 : 2005 : REV A : EDT 1 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1900 : 1994 : R1998 | Standard Practice for Carbon Black-Sampling Bulk Shipments |
| ASTM D 5554 : 2015 | Standard Test Method for Determination of the Iodine Value of Fats and Oils |
| ASTM D 1799 : 1993 : R1997 | Standard Practice for Carbon Black-Sampling Packaged Shipments |
| ASTM D 1765 : 2003 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 4052 : 1996 : R2002 : EDT 1 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 4483 : 1999 | Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries |
| ASTM D 1765 : 2004 : EDT 1 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 4483 : 2005 : REV A | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4052 : 2018 : REV A | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1765 : 2017 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1799 : 2003 : REV A | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 1765 : 2014 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1765 : 2000 : REV A | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 4052 : 2009 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 4821 : 2015 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 4821 : 2003 : REV A | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 1765 : 2018 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1799 : 2003 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 1765 : 2001 : EDT 1 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1218 : 2002 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
| ASTM D 1765 : 2004 : REV A | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1900 : 2006 | Standard Practice for Carbon Black-Sampling Bulk Shipments |
| ASTM D 1765 : 2001 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1765 : 2016 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 4052 : 2011 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 5554 : 1995 | Standard Test Method for Determination of the Iodine Value of Fats and Oils |
| ASTM D 4052 : 2016 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 4821 : 2004 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 1765 : 2005 : REV A | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1765 : 2013 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1799 : 2003 : REV A : R2008 | Standard Practice for Carbon Black<span class='unicode'>—</span>Sampling Packaged Shipments |
| ASTM D 1799 : 2002 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 4821 : 2003 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 1765 : 2006 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1900 : 1994 : R2002 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 4821 : 1999 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 4821 : 2016 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 4821 : 2007 | Standard Guide for Carbon Black-Validation of Test Method Precision and Bias |
| ASTM D 1218 : 2002 : R2007 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
| ASTM D 1218 : 1999 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
| ASTM D 4052 : 1996 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 4483 : 2005 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 1218 : 2012 : R2016 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
| ASTM D 1765 : 2010 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 4821 : 2001 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 1765 : 2004 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 5554 : 1995 : R2001 | Standard Test Method for Determination of the Iodine Value of Fats and Oils |
| ASTM D 4483 : 2014 : REV A | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4483 : 2014 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 1218 : 1982 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
| ASTM D 1218 : 2012 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
| ASTM D 4483 : 2018 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4483 : 2005 : REV A : R2011 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4821 : 2006 | Standard Guide for Carbon Black-Validation of Test Method Precision and Bias |
| ASTM D 4052 : 2015 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1900 : 2006 : R2011 | Standard Practice for Carbon Black<char: emdash>Sampling Bulk Shipments |
| ASTM D 4821 : 2005 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 1765 : 2005 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 4052 : 2018 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 4821 : 2007 : EDT 1 | Standard Guide for Carbon Black<char: emdash>Validation of Test Method Precision and Bias |
| ASTM D 1799 : 2003 : REV A : R2014 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.