ASTM D 204 : 2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Sewing Threads
Hardcopy , PDF
11-11-2014
English
10-09-2002
CONTAINED IN VOL. 07.01, 2016 Defines sewing threads of any fiber.
Committee |
D 13
|
DocumentType |
Test Method
|
Pages |
12
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 These test methods can be used to evaluate sewing threads of any fiber.
1.1.1 The test methods in this standard are intended to evaluate only sewing thread taken from thread holders.
1.2 These test methods only provide for the measurement of sewing thread physical properties. These test methods do not address any other properties that may be important for the satisfactory performance of sewing threads under particular end use conditions.
1.3 These test methods can be used to measure the following properties:
Sections | |
Colorfastness to Drycleaning | 73-83 |
Colorfastness to Laundering | 62-72 |
Colorfastness to Water Migration | 84-94 |
Diameter | 43-50 |
Length per Thread Holder | 34-42 |
Shrinkage, Single Strand | 51-61 |
Dry Heat | 58.1 |
Boiling Water | 58.2 |
Strength and Elongation | 15-21 |
Single Strand-Conditioned | 19.1.1 |
Single Strand-Wet | 19.1.2 |
Loop Strength | 19.2 |
Knot Strength | 19.3 |
Twist | 22-27 |
Twist Balance | 28-33 |
Yarn Number | 7-14 |
Note 1—For methods covering tests on prepared seams, refer to Test Methods D 1683 and D 3940.
1.4 The values stated in SI units are to be regarded as standard; the values in English units are provided as information only and are not exact equivalents.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
A-A-59369 Base Document:2003 | UNDERSHIRT, SILK WEIGHT SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-1 |
MIL-S-44039 Revision C:1990 | SHIRT, MAN'S, LONG SLEEVE, POLYESTER/COTTON, ARMY GREEN 415, DURABLE PRESS |
MIL-S-44041 Revision C:1990 | SHIRT, MAN'S, SHORT SLEEVE, POLYESTER/COTTON, ARMY GREEN 415, DURABLE PRESS |
ASTM F 1752 : 1996 : R2001 | Standard Test Method for Archery Bow Component—Cord Material |
MIL-S-87214 Revision B:1992 | SHIRTS, MEN'S, LONG AND SHORT SLEEVES, POLYESTER/COTTON (DURABLE PRESS) |
ASTM D 3940 : 1983 | Test Method for Bursting Strength (Load) and Elongation of Sewn Semas of Knit or Woven Stretch Textile Fabrics (Withdrawn 1995) |
ASTM E 1549/E1549M : 2013 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM F 1752 : 1996 : R2006 | Standard Test Method for Archery Bow Component-Cord Material |
MIL-C-2181 Revision M:1990 | COVERALLS, TOXICOLOGICAL AGENTS PROTECTIVE M 3 |
ASTM D 5446 : 2008 : R2019 | Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
ASTM D 3693 : 2002 : R2016 | Standard Specification for Labeled Length per Holder of Sewing Thread |
ASTM D 3823 : 2007 | Standard Practice for Determining Ticket Numbers for Sewing Threads |
ASTM F 1648 : 1995 : R2008 | Standard Test Methods for Archery Bowstring Component-Serving String Material |
ASTM F 1752 : 1996 : R2010 | Standard Test Method for Archery Bow Component-Cord Material |
ASTM D 4030 : 2004 | Standard Specification for Glass Fiber Cord and Sewing Thread |
ASTM D 3823 : 2007 : R2012 | Standard Practice for Determining Ticket Numbers for Sewing Threads |
ASTM F 1752 : 1996 | Standard Test Method for Archery Bow Component—Cord Material |
A-A-59358 Base Document:2003 | UNDERSHIRT, MID WEIGHT, SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-2 |
A-A-59329 Base Document:2003 | DRAWERS, SILK WEIGHT SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-1 |
A-A-50197 Revision A:2000 | THREAD, LINEN |
ASTM E 1549/E1549M : 2013 : R2016 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
ASTM F 1648 : 1995 : R2013 | Standard Test Methods for Archery Bowstring Component—Serving String Material (Withdrawn 2022) |
ASTM D 3693 : 2002 | Standard Specification for Labeled Length per Holder of Sewing Thread |
ASTM F 1752 : 1996 : R2014 | Standard Test Method for Archery Bow Component—Cord Material (Withdrawn 2023) |
MIL-C-20079 Revision H:1987 | CLOTH, GLASS; TAPE, TEXTILE GLASS; AND THREAD, GLASS AND WIRE-REINFORCED GLASS |
A-A-59327 Base Document:2003 | DRAWERS, MID WEIGHT, SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-2 |
MIL-DTL-32072 Base Document:2002 | THREAD, POLYESTER |
ASTM D 4030/D4030M : 2015 : REDLINE | Standard Specification for Glass Fiber Cord and Sewing Thread |
ASTM F 1648 : 1995 | Standard Test Methods for Archery Bowstring Component-Serving String Material |
MIL P 15183 : B NOTICE 1 | PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC) |
A-A-3081 Base Document:1997 | MOPHEAD, WET (COTTON-SYNTHETIC AND SYNTHETIC) |
ASTM D 5446 : 2008 : R2013 | Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
V-T-285 Revision F:1991 | THREAD, POLYESTER |
ASTM D 5446 : 2008 | Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
A-A-50196 Revision B:2000 | THREAD, SILK |
ASTM D 3693 : 2002 : R2010 | Standard Specification for Labeled Length per Holder of Sewing Thread |
ASTM F 1648 : 1995 : R2003 | Standard Test Methods for Archery Bowstring Component-Serving String Material |
ASTM D 3823 : 2007 : R2018 | Standard Practice for Determining Ticket Numbers for Sewing Threads |
ASTM D 2258 : 1999 | Standard Practice for Sampling Yarn for Testing |
AATCC EP 1 : 2012 | GRAY SCALE FOR COLOR CHANGE |
ASTM D 3940 : 1983 | Test Method for Bursting Strength (Load) and Elongation of Sewn Semas of Knit or Woven Stretch Textile Fabrics (Withdrawn 1995) |
ASTM D 6193 : 2016 : REDLINE | Standard Practice for Stitches and Seams |
ASTM D 76 : 1999 | Standard Specification for Tensile Testing Machines for Textiles |
AATCC TM 135 : 2015 | DIMENSIONAL CHANGES OF FABRICS AFTER HOME LAUNDERING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.