ASTM D 198 : 2021 : REV A
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods of Static Tests of Lumber in Structural Sizes
Hardcopy , PDF
23-08-2022
English
24-08-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 07
|
| DocumentType |
Test Method
|
| Pages |
29
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover the evaluation of lumber and wood-based products in structural sizes by various testing procedures.
1.2The test methods appear in the following order:
| Sections | |
| Flexure | 4 – 11 |
| Compression (Short Specimen) | 13 – 20 |
| Compression (Long Specimen) | 21 – 28 |
| Tension | 29 – 36 |
| Torsion | 37 – 44 |
| Shear Modulus | 45 – 52 |
1.3Notations and symbols relating to the various testing procedures are given in Appendix X1.
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 6874 : 2021 | Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation |
| ASTM D 6570 : 2018 : REV A | Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber |
| ASTM D 4761 : 2019 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials |
| ASTM D 7341 : 2021 | Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing |
| ASTM D 5055 : 2019 : EDT 1 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 1990 : 2019 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 7199 : 2020 | Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models |
| ASTM D 7672 : 2019 | Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies |
| ASTM D 143 : 2021 | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM D 7469 : 2021 | Standard Test Methods for End Joints in Structural Wood Products |
| ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM D 5457 : 2021 : REV A | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 4945 : 2017 | Standard Test Method for High-Strain Dynamic Testing of Deep Foundations |
| ASTM D 7032 : 2017 | Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails |
| ASTM D 1036 : 1999 : R2017 | Standard Test Methods of Static Tests of Wood Poles |
| ASTM D 7857 : 2016 | Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures |
| ASTM D 6815 : 2009 : R2015 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM E 2954 : 2015 | Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members |
| ASTM D 5456 : 2021 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 7381 : 2007 : R2013 | Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material |
| ASTM D 3737 : 2018 : EDT 1 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 143 : 2022 | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM E 2954 : 2015 : R2022 | Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members |
| ASTM D 7381 : 2007 : R2021 : EDT 1 | Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material |
| ASTM D 7469 : 2022 | Standard Test Methods for End Joints in Structural Wood Products |
| ASTM D 8391 : 2022 | Standard Specification for Demonstrating Equivalent Fire Performance for Wood-Based Floor Framing Members to Unprotected 2 by 10 Dimension Lumber or Equal-Sized Structural Composite Lumber |
| ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 2915 : 2017 : R2022 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.