ASTM D 1945 : 2014 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Test Method for Analysis of Natural Gas by Gas Chromatography
Available format(s)
PDF
Language(s)
English
Published date
01-11-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 05.06, 2014 Defines the determination of the chemical composition of natural gases and similar gaseous mixtures within the range of composition.
| Committee |
D 03
|
| DocumentType |
Redline
|
| Pages |
21
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This test method covers the determination of the chemical composition of natural gases and similar gaseous mixtures within the range of composition shown in Table 1. This test method may be abbreviated for the analysis of lean natural gases containing negligible amounts of hexanes and higher hydrocarbons, or for the determination of one or more components, as required.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| SAE J 2719 : 2005(R2015) | HYDROGEN FUEL QUALITY FOR FUEL CELL VEHICLES |
| 16/30312922 DC : 0 | BS ISO 18888 - GAS TURBINE COMBINED CYCLE POWER PLANTS THERMAL PERFORMANCE TESTS |
| 13/30279896 DC : 0 | BS ISO 8178-5 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS |
| ISO 18888:2017 | Gas turbine combined cycle power plants — Thermal performance tests |
| MIL-PRF-32207 Base Document:2006 | PROPELLANT, METHANE |
| ASTM D 7165 : 2010 | Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels |
| BS ISO 8178-5:2008 | Reciprocating internal combustion engines. Exhaust emission measurement Test fuels |
| NACE SP 01 06 : 2006 | CONTROL OF INTERNAL CORROSION IN STEEL PIPELINES AND PIPING SYSTEMS |
| ASTM D 3588 : 1998 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
| ASTM D 3588 : 1998 : R2003 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
| ASTM D 3588 : 1998 : R2011 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
| ASTM D 6332 : 2012 : R2017 | Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors |
| ASTM D 7940 : 2014 | Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy |
| ASME PTC22 : 2014 | GAS TURBINES |
| ASTM D 2426 : 1993 : R2014 | Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography |
| ASTM D 3588 : 1998 : R2017 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
| ASTM D 2426 : 1993 : R1998 | Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography |
| ASTM D 7164 : 2010 : R2015 | Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography |
| ASTM D 7800/D7800M : 2014 | Standard Test Method for Determination of Elemental Sulfur in Natural Gas (Withdrawn 2023) |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| ASME PTC 40 : 1991 | PERFORMANCE TEST CODES - FLUE GAS DESULFURIZATION UNITS |
| ASME PTC4.3 : 2017 | PERFORMANCE TEST CODES - AIR HEATERS |
| API 4741 : 2005 | COLLECTING AND INTERPRETING SOIL GAS SAMPLES FROM THE VADOSE ZONE - A PRACTICAL STRATEGY FOR ASSESSING THE SUBSURFACE VAPOR-TO-INDOOR AIR MIGRATION PATHWAY AT PETROLEUM HYDROCARBON SITES |
| BS ISO 14687-3:2014 | Hydrogen fuel. Product specification Proton exchange membrane (PEM) fuel cell applications for stationary appliances |
| ASTM D 5504 : 2012 : REDLINE | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| API MPM CH22.6 : 2015 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 22.6: TESTING PROTOCOL FOR GAS CHROMATOGRAPHS |
| ASTM D 6968 : 2003 : R2015 | Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection (Withdrawn 2024) |
| ASTM D 5287 : 2008 | Standard Practice for Automatic Sampling of Gaseous Fuels |
| ASTM D 5287 : 2008 : R2015 | Standard Practice for Automatic Sampling of Gaseous Fuels (Withdrawn 2024) |
| ASTM D 6332 : 2012 | Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors |
| ASTM D 7833 : 2014 : REDLINE | Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography |
| ASTM D 7165 : 2010 : R2015 | Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels |
| ISO 8178-5:2015 | Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels |
| ISO 14687-2:2012 | Hydrogen fuel Product specification Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles |
| BS ISO 14687-2:2012 | Hydrogen fuel. Product specification Proton exchange membrane (PEM) fuel cell applications for road vehicles |
| 12/30240138 DC : 0 | BS ISO 14687-3 - HYDROGEN FUEL - PRODUCT SPECIFICATION - PART 3: PROTON EXCHANGE MEMBRANE (PEM) FUEL CELL APPLICATIONS FOR STATIONARY APPLIANCES |
| BS ISO TR 9122-3:1993 | Toxicity testing of fire effluents Methods for the analysis of gases and vapours in fire effluents |
| ASTM D 6968 : 2003 | Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection |
| SAE J1616_201703 | RECOMMENDED PRACTICE FOR COMPRESSED NATURAL GAS VEHICLE FUEL |
| API TR 2572 : 2013 | CARBON CONTENT, SAMPLING, AND CALCULATION |
| ISO 14687-3:2014 | Hydrogen fuel Product specification Part 3: Proton exchange membrane (PEM) fuel cell applications for stationary appliances |
| ASTM D 6968 : 2003 : R2009 | Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection |
| BS ISO 18888:2017 | Gas turbine combined cycle power plants. Thermal performance tests |
| SAE J1498_201709 | HEATING VALUE OF FUELS |
| ASTM D 2426 : 1993 : R2004 : EDT 1 | Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography |
| ASTM D 2426 : 1993 : R2009 | Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography |
| ASTM D 7164 : 2010 | Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography |
| ASME PTC19.1 : 2013 | TEST UNCERTAINTY |
| ASME PTC46 : 2015 | PERFORMANCE TEST CODES - OVERALL PLANT PERFORMANCE |
| ASTM E 260 : 1996 | Standard Practice for Packed Column Gas Chromatography |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.