ASTM D 1856 : 2009 : R2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Recovery of Asphalt From Solution by Abson Method
Hardcopy , PDF
05-06-2021
English
03-02-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 04.03, 2017 Describes the recovery by the Abson method of asphalt from a solution from a previously conducted extraction.
| Committee |
D 04
|
| DevelopmentNote |
Also numbered as AASHTO R 59. (05/2013)
|
| DocumentType |
Test Method
|
| Pages |
5
|
| ProductNote |
Reconfirmed 2015
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the recovery by the Abson method of asphalt from a solution from a previously conducted extraction. The asphalt is recovered with properties substantially the same as those it possessed in the bituminous mixture and in quantities sufficient for further testing.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 4383 : 2018 | Standard Specification for Plowable, Raised Retroreflective Pavement Markers |
| ASTM D 6608 : 2020 | Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes |
| ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4887/D4887M : 2011 : R2016 | Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials |
| ASTM D 5710/D5710M : 2015 | Standard Specification for Trinidad Lake Modified Asphalt |
| ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 2172/D2172M : 2017 : EDT 1 | Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures |
| ASTM D 5404/D5404M : 2012 : R2017 | Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator |
| ASTM D 6608 : 2012 | Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes |
| ASTM D 3666 : 2016 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 6368 : 2006 : R2018 | Standard Specification for Vapor-Degreasing Solvents Based on <emph type="bdit">normal</emph >-Propyl Bromide and Technical Grade <emph type="bdit">normal</emph >-Propyl Bromide |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM D 6368 : 2000 | Standard Specification for Vapor-Degreasing Grade and General Grade <i>normal</i>-Propyl Bromide |
| ASTM D 2172 : 1995 | Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures |
| ASTM D 2172 : 2005 | Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures |
| ASTM D 4080 : 2015 | Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade |
| ASTM D 4080 : 2000 : R2011 | Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade |
| ASTM D 6368 : 2005 | Standard Specification for Vapor-Degreasing Grade and General Grade <bdit>normal</bdit>-Propyl Bromide |
| ASTM D 4080 : 2015 : REDLINE | Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade |
| ASTM D 6368 : 2002 | Standard Specification for Vapor-Degreasing Grade and General Grade <i>normal</i>-Propyl Bromide |
| ASTM D 2939 : 2003 | Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012) |
| ASTM D 4080 : 1996 | Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade |
| ASTM D 2172 : 2001 : EDT 1 | Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures |
| ASTM D 4080 : 2000 : R2006 | Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade |
| ASTM D 4080 : 2015 : R2020 | Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade |
| ASTM D 2172 : 2001 | Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures |
| ASTM D 6368 : 2006 | Standard Specification for Vapor-Degreasing Solvents Based on <bdit>normal</bdit>-Propyl Bromide and Technical Grade <bdit>normal</bdit>-Propyl Bromide |
| ASTM D 6368 : 2006 : R2012 | Standard Specification for Vapor-Degreasing Solvents Based on <emph type="bdit">normal</emph>-Propyl Bromide and Technical Grade <emph type="bdit">normal</emph>-Propyl Bromide |
| ASTM D 2939 : 1998 | Standard Test Methods for Emulsified Bitumens Used as Protective Coatings |
| ASTM C 670 : 2015 : REDLINE | Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials |
| ASTM D 4080 : 2000 | Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.