ASTM D 1813 : 2013 : R2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Measuring Thickness of Leather Test Specimens
Hardcopy , PDF
14-01-2023
English
26-09-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 15.04, 2017 Defines the measurement of the thickness of leather test specimens in which the dimensions of the specimens are used directly in determining the results of tests for physical properties.
| Committee |
D 31
|
| DocumentType |
Test Method
|
| Pages |
2
|
| ProductNote |
Reconfirmed 2017
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the measurement of the thickness of leather test specimens in which the dimensions of the specimens are used directly in determining the results of tests for physical properties. This test method does not apply to wet blue.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 8137 : 2018 | Practice for Accelerated Aging of Leather |
| ASTM D 2212 : 2000 : R2021 | Standard Test Method for Slit Tear Resistance of Leather |
| ASTM D 2210 : 2021 | Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test |
| ASTM D 2209 : 2000 : R2021 | Standard Test Method for Tensile Strength of Leather |
| ASTM D 2207 : 2000 : R2021 | Standard Test Method for Bursting Strength of Leather by the Ball Method |
| ASTM D 6075 : 2013 : R2020 | Standard Test Method for Cracking Resistance of Leather |
| ASTM D 1814 : 1970 : R2021 | Standard Test Method for Measuring Thickness of Leather Units |
| ASTM D 7340 : 2007 : R2018 : EDT 1 | Standard Practice for Thermal Conductivity of Leather |
| ASTM D 4786 : 2000 : R2020 | Standard Test Method for Stitch Tear Strength, Single Hole |
| ASTM D 1815 : 2000 : R2021 | Standard Test Method for Water Absorption (Static) of Vegetable Tanned Leather |
| ASTM D 2213 : 2000 : R2020 | Standard Test Method for Compressibility of Leather |
| ASTM D 2346 : 2021 | Standard Test Method for Apparent Density of Leather |
| ASTM D 6075 : 2013 | Standard Test Method for Cracking Resistance of Leather |
| ASTM D 2208 : 2016 | Standard Test Method for Breaking Strength of Leather by the Grab Method |
| ASTM D 2209 : 2000 : R2015 | Standard Test Method for Tensile Strength of Leather |
| ASTM D 2207 : 2000 : R2015 | Standard Test Method for Bursting Strength of Leather by the Ball Method |
| ASTM D 4704 : 2013 : R2017 | Standard Test Method for Tearing Strength, Tongue Tear of Leather |
| ASTM D 2346 : 2013 | Standard Test Method for Apparent Density of Leather |
| ASTM D 1815 : 2000 : R2015 | Standard Test Method for Water Absorption (Static) of Vegetable Tanned Leather |
| ASTM D 2213 : 2000 : R2016 | Standard Test Method for Compressibility of Leather |
| ASTM D 2212 : 2000 : R2015 | Standard Test Method for Slit Tear Resistance of Leather |
| ASTM D 7340 : 2007 : R2018 | Standard Practice for Thermal Conductivity of Leather |
| ASTM D 4705 : 2018 | Standard Test Method for Stitch Tear Strength of Leather, Double Hole |
| ASTM D 2210 : 2013 | Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test |
| ASTM D 4786 : 2000 : R2016 | Standard Test Method for Stitch Tear Strength, Single Hole |
| ASTM D 1814 : 1970 : R2015 | Standard Test Method for Measuring Thickness of Leather Units |
| ASTM D 1610 : 2001 | Standard Practice for Conditioning Leather and Leather Products for Testing |
| ASTM D 1610 : 2001 : R2007 | Standard Practice for Conditioning Leather and Leather Products for Testing |
| ASTM D 1610 : 2000 | Standard Practice for Conditioning Leather and Leather Products for Testing |
| ASTM D 1610 : 2001 : R2013 | Standard Practice for Conditioning Leather and Leather Products for Testing |
| ASTM D 1610 : 2018 | Standard Practice for Conditioning Leather and Leather Products for Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.