ASTM D 1776 : 2008 : EDT 1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Conditioning and Testing Textiles
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
01-08-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 13
|
| DocumentType |
Standard Practice
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This practice covers the conditioning and testing of textiles when conditioning is specified in a test method. Because prior exposure of textiles to high or low humidity may affect moisture pick-up equilibrium, a procedure also is given for preconditioning the material when required.
1.2 The values stated the text are in SI units. Inch-pound units are shown in parentheses. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance to a specification.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 3882 : 2008 : R2016 : EDT 1 | Standard Test Method for Bow and Skew in Woven and Knitted Fabrics |
| ASTM D 6588/D6588M : 2011 : R2016 | Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test) |
| ASTM D 6283 : 2012 | Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings |
| ASTM D 5427 : 2009 : R2019 | Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics |
| ASTM D 1440 : 2007 : R2019 | Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method) |
| ASTM D 7744/D7744M : 2011 | Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes |
| ASTM D 5793 : 2018 | Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings |
| ASTM D 6479 : 2015 | Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints |
| ASTM D 1575 : 2013 | Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver (Withdrawn 2022) |
| ASTM D 2731 : 2015 | Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines) |
| ASTM D 5035 : 2011 : R2019 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM D 4884/D4884M : 2014 : REV A | Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles |
| ASTM D 5262 : 2007 : R2016 | Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics |
| ASTM D 519 : 2004 : R2013 | Standard Test Method for Length of Fiber in Wool Top (Withdrawn 2022) |
| ASTM F 2704 : 2017 : REV A | Standard Specification for Air-Fed Protective Ensembles |
| ASTM D 581/D581M : 2012 | Standard Specification for Glass Fiber Greige Braided Tubular Sleeving (Withdrawn 2021) |
| ASTM D 7785 : 2012 | Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration |
| ASTM D 7267 : 2019 : REV A | Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering |
| ASTM D 5344 : 1999 : R2017 | Standard Test Method for Extension Force of Partially Oriented Yarn |
| ASTM D 4772 : 2014 : R2019 | Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow) |
| ASTM D 1388 : 2018 | Standard Test Method for Stiffness of Fabrics |
| ASTM D 7570 : 2017 | Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering |
| ASTM D 4833/D4833M : 2007 : R2013 : EDT 1 | Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products |
| ASTM D 4724 : 2011 | Standard Test Method for Entanglements in Untwisted Filament Yarns by Needle Insertion |
| ASTM D 6828 : 2002 : R2019 | Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure |
| ASTM D 5252 : 2015 | Standard Practice for the Operation of the Hexapod Tumble Drum Tester |
| ASTM D 1448 : 2011 | Standard Test Method for Micronaire Reading of Cotton Fibers (Withdrawn 2020) |
| ASTM D 4120 : 2007 : R2018 | Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests |
| ASTM F 1648 : 1995 : R2013 | Standard Test Methods for Archery Bowstring Component—Serving String Material (Withdrawn 2022) |
| ASTM D 4595 : 2017 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 4830/D4830M : 1998 : R2014 : EDT 1 | Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing |
| ASTM D 1423/D1423M : 2016 | Standard Test Method for Twist in Yarns by Direct-Counting |
| ASTM F 2407 : 2006 : R2013 : EDT 1 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| ASTM D 1336 : 2007 : R2019 | Standard Test Method for Distortion of Yarn in Woven Fabrics |
| ASTM D 6611 : 2016 | Standard Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance |
| ASTM D 6962 : 2017 | Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings |
| ASTM D 5823 : 2019 | Standard Test Method for Tuft Height of Pile Floor Coverings |
| ASTM D 4685/D4685M : 2015 | Standard Test Method for Pile Fabric Abrasion |
| ASTM D 204 : 2002 : R2016 | Standard Test Methods for Sewing Threads |
| ASTM D 2859 : 2016 | Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials |
| ASTM D 6566 : 2018 | Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats |
| ASTM F 1959/F1959M : 2014 : EDT 1 | Standard Test Method for Determining the Arc Rating of Materials for Clothing |
| ASTM D 5548 : 2013 | Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings) |
| ASTM F 1752 : 1996 : R2014 | Standard Test Method for Archery Bow Component—Cord Material (Withdrawn 2023) |
| ASTM D 1447 : 2007 : R2012 : EDT 1 | Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement |
| ASTM D 7508/D7508M : 2010 : R2015 | Standard Specification for Polyolefin Chopped Strands for Use in Concrete |
| ASTM D 7410 : 2007 : R2012 | Standard Practice for Qualification of Cotton Classification Instruments for Cotton Marketing (Withdrawn 2021) |
| ASTM D 6540 : 2017 | Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering |
| ASTM D 3656/D3656M : 2013 | Standard Specification for Insect Screening and Louver Cloth Woven from<brk/>Vinyl-Coated Glass Yarns |
| ASTM D 3886 : 1999 : R2015 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus) |
| ASTM D 5867 : 2012 : EDT 1 | Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments |
| ASTM D 4966 : 2012 : R2016 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method) |
| ASTM D 5034 : 2009 : R2017 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 5665/D5665M : 1999 : REV A : R2014 : EDT 1 | Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing |
| ASTM D 3773/D3773M : 2010 : R2019 | Standard Test Methods for Length of Woven Fabric |
| ASTM D 7983 : 2017 | Standard Test Method for Shrinkage of Carpet Backing Fabrics |
| ASTM D 3776/D3776M : 2009 : REV A : R2017 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
| ASTM F 778 : 1988 : R2014 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM D 4974 : 2004 : R2016 | Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven |
| ASTM D 7748/D7748M : 2014 : EDT 1 | Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products |
| ASTM D 5278/D5278M : 2009 : R2017 | Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing) |
| ASTM D 1335 : 2017 : EDT 1 | Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings |
| ASTM D 2462 : 2013 | Standard Test Method for Moisture in Wool by Distillation With Toluene (Withdrawn 2022) |
| ASTM F 2703 : 2008 : R2013 | Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction |
| ASTM D 4920 : 2013 | Standard Terminology Relating to Conditioning, Chemical, and Thermal Properties (Withdrawn 2022) |
| ASTM D 2261 : 2013 : R2017 : EDT 1 | Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) |
| ASTM D 3822/D3822M : 2014 | Standard Test Method for Tensile Properties of Single Textile Fibers |
| ASTM D 5362 : 2013 : R2018 | Standard Test Method for Snagging Resistance of Fabrics (Bean Bag) |
| ASTM D 6859 : 2018 | Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings |
| ASTM D 6719 : 2012 | Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering (Withdrawn 2021) |
| ASTM D 2130 : 2013 | Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection (Withdrawn 2022) |
| ASTM D 4533/D4533M : 2015 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
| ASTM D 737 : 2018 | Standard Test Method for Air Permeability of Textile Fabrics |
| ASTM D 7571 : 2018 | Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame |
| ASTM D 5417 : 2016 | Standard Practice for Operation of the Vettermann Drum Tester |
| ASTM D 6717 : 2007 : R2018 | Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens) |
| ASTM D 6614 : 2007 : R2015 | Standard Test Method for Stretch Properties of Textile Fabrics – CRE Method |
| ASTM D 2259 : 2002 : R2016 | Standard Test Method for Shrinkage of Yarns |
| ASTM D 6587 : 2012 : R2018 | Standard Test Method for Yarn Number Using Automatic Tester |
| ASTM F 1955 : 2015 | Standard Test Method for Flammability of Sleeping Bags |
| ASTM D 4389/D4389M : 2016 | Standard Specification for Finished Glass Fabrics Woven From Rovings |
| ASTM D 6321/D6321M : 2014 | Standard Practice for the Evaluation of Machine Washable T-Shirts |
| ASTM D 1424 : 2009 : R2019 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus |
| ASTM D 3786/D3786M : 2018 | Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method |
| ASTM D 276 : 2012 | Standard Test Methods for Identification of Fibers in Textiles (Withdrawn 2021) |
| ASTM D 3108/D3108M : 2013 | Standard Test Method for Coefficient of Friction, Yarn to Solid Material |
| ASTM D 4030/D4030M : 2015 | Standard Specification for Glass Fiber Cord and Sewing Thread |
| ASTM D 1442 : 2006 : R2019 | Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures) |
| ASTM D 6337 : 1998 : R2013 | Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics |
| ASTM D 6500 : 2000 : R2012 : EDT 1 | Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser (Withdrawn 2021) |
| ASTM F 2702 : 2015 | Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction (Withdrawn 2020) |
| ASTM D 3217/D3217M : 2015 | Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations |
| ASTM F 2700 : 2008 : R2013 | Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating |
| ASTM D 8007 : 2015 : R2019 | Standard Test Method for Wale and Course Count of Weft Knitted Fabrics |
| ASTM D 3107 : 2007 : R2019 | Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns |
| ASTM D 1576 : 2013 | Standard Test Method for Moisture in Wool by Oven-Drying (Withdrawn 2022) |
| ASTM D 2646 : 2018 | Standard Guide for Backing Fabric Characteristics of Pile Yarn Floor Coverings |
| ASTM D 2524 : 2013 | Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method—<fraction> <num>1</num><den>8</den></fraction>-in. (3.2-mm) Gage Length (Withdrawn 2022) |
| ASTM D 7025 : 2009 : R2015 : EDT 1 | Standard Test Method for Assessing Clean Flax Fiber Fineness |
| ASTM D 6119 : 2012 | Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic |
| ASTM D 7506/D7506M : 2017 | Standard Test Method for Pocket Reinforcement |
| ASTM D 4964 : 1996 : R2016 | Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine) |
| ASTM D 1445/D1445M : 2012 | Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method) |
| ASTM D 5587 : 2015 : R2019 | Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure |
| ASTM D 6961/D6961M : 2009 : R2015 : EDT 1 | Standard Test Method for Color Measurement of Flax Fiber |
| ASTM D 3218 : 2007 : R2018 | Standard Specification for Polyolefin Monofilaments |
| ASTM D 7142 : 2005 : R2016 | Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners |
| ASTM G 147 : 2017 | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
| ASTM D 3412/D3412M : 2013 | Standard Test Method for Coefficient of Friction, Yarn to Yarn |
| ASTM D 4846 : 1996 : R2016 | Standard Test Method for Resistance to Unsnapping of Snap Fasteners |
| ASTM D 3990 : 2012 : R2016 | Standard Terminology Relating to Fabric Defects |
| ASTM D 7269/D7269M : 2017 | Standard Test Methods for Tensile Testing of Aramid Yarns |
| ASTM D 3939/D3939M : 2013 : R2017 | Standard Test Method for Snagging Resistance of Fabrics (Mace) |
| ASTM D 7811 : 2013 : R2017 | Standard Test Method for Bow and Skew Using a Measuring Tool |
| ASTM D 7812 : 2016 | Standard Test Method for Tensile Testing of Aramid Paper |
| ASTM D 2594 : 2004 : R2016 | Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power |
| ASTM D 7241 : 2013 | Standard Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering (Withdrawn 2022) |
| ASTM D 4029/D4029M : 2016 | Standard Specification for Finished Woven Glass Fabrics |
| ASTM D 1770 : 1994 : R2012 : EDT 1 | Standard Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top (Withdrawn 2021) |
| ASTM D 1441 : 2012 | Standard Practice for Sampling Cotton Fibers for Testing |
| ASTM D 2724 : 2019 | Standard Test Method for Bond Strength of Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM F 1939 : 2015 | Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating |
| ASTM D 2061 : 2007 : R2013 | Standard Test Methods for Strength Tests for Zippers |
| ASTM D 5726 : 1998 : R2013 | Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing |
| ASTM D 6775 : 2013 : R2017 | Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material |
| ASTM D 885/D885M : 2010 : REV A : R2014 : EDT 1 | Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers (Withdrawn 2023) |
| ASTM F 1551 : 2009 : R2017 | Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials |
| ASTM D 3787 : 2016 | Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test |
| ASTM D 2256/D2256M : 2010 : R2015 | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
| ASTM D 6663 : 2008 : R2019 | Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use |
| ASTM D 1059 : 2017 | Standard Test Method for Yarn Number Based on Short-Length Specimens |
| ASTM D 1578 : 1993 : R2016 | Standard Test Method for Breaking Strength of Yarn in Skein Form |
| ASTM D 5431 : 2008 : R2019 | Standard Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use |
| ASTM D 1987 : 2018 | Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters |
| ASTM D 6770 : 2007 : R2015 | Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method) |
| ASTM D 6720 : 2007 : R2018 | Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method) |
| ASTM D 6413/D6413M : 2015 | Standard Test Method for Flame Resistance of Textiles (Vertical Test) |
| ASTM D 3884 : 2009 : R2017 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 4158 : 2008 : R2016 | Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion) |
| ASTM D 1294 : 2005 : R2013 | Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length (Withdrawn 2022) |
| ASTM D 7138 : 2016 | Standard Test Method to Determine Melting Temperature of Synthetic Fibers |
| ASTM D 6797 : 2015 | Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test (Withdrawn 2024) |
| ASTM F 2992/F2992M : 2015 | Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer (TDM-100) Test Equipment |
| ASTM D 2054 : 1999 : R2015 | Standard Test Method for Colorfastness of Zipper Tapes to Crocking |
| ASTM D 4886 : 2018 | Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method) |
| ASTM D 7842/D7842M : 2012 : R2016 | Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons |
| ASTM D 6612 : 2000 : R2016 | Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester |
| ASTM F 2961 : 2015 | Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter |
| ASTM D 580/D580M : 2015 | Standard Specification for Greige Woven Glass Tapes and Webbings |
| ASTM D 4231 : 2014 | Standard Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts |
| ASTM D 7984 : 2016 | Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument |
| ASTM D 2060 : 2014 : EDT 1 | Standard Test Methods for Measuring Zipper Dimensions |
| ASTM D 646 : 2013 | Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight) (Withdrawn 2022) |
| ASTM D 6241 : 2014 | Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
| ASTM D 579/D579M : 2015 | Standard Specification for Greige Woven Glass Fabrics |
| ASTM D 1425/D1425M : 2014 | Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment |
| ASTM D 3936 : 2017 | Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.