ASTM D 1755 : 2021
Current
The latest, up-to-date edition.
Standard Specification for Poly(Vinyl Chloride) Resins
Hardcopy , PDF
English
08-06-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 20
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers the establishment of requirements for homopolymers of vinyl chloride in original powder form intended for subsequent mixing and processing in thermoplastic compositions. These resins have a nominal specific gravity of 1.4 and a theoretical chlorine content of 56.8 %.
1.2Two types of resin have been recognized: general purpose (suspension or mass) and dispersion. When mixed with plasticizer, general-purpose resins yield a dry or moist powder while dispersion resins yield a liquid slurry. Since many resins are polymerized to meet special requirements, a system of classification has been provided that permits a wide choice of grades.
1.3The values stated in SI units are to be regarded as the standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1:This standard and ISO 1264 – 1980 address the same subject matter, but differ in technical content.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 1243 : 2015 | Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers |
| ASTM D 1823 : 2016 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer |
| ASTM F 2169 : 2015 : R2020 | Standard Specification for Resilient Stair Treads |
| ASTM F 1861 : 2021 | Standard Specification for Resilient Wall Base |
| ASTM D 1824 : 2016 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
| ASTM D 2383 : 2019 | Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions |
| ASTM D 1824 : 2024 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
| ASTM D 3030 : 2017 | Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins |
| ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
| ASTM D 495 : 2014 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
| ASTM D 3030 : 2023 | Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins |
| ASTM D 883 : 2024 : REV A | Standard Terminology Relating to Plastics |
| ASTM D 2132 : 2023 | Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials |
| ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
| ASTM D 1125 : 2014 | Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023) |
| ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
| ASTM E 2251 : 2014 : R2021 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM E 2251 : 2014 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM D 1600 : 2018 | Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024) |
| ASTM D 2132 : 2019 | Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials |
| ASTM D 1823 : 2024 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer |
| ASTM D 1243 : 2022 | Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers |
| ASTM D 1243 : 2022 : EDT 1 | Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers |
| ASTM D 1125 : 2023 | Standard Test Methods for Electrical Conductivity and Resistivity of Water |
| ASTM D 495 : 2022 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
| ASTM D 1895 : 2017 | Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
| ASTM D 1895 : 2024 | Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.