ASTM D 1510 : 2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Carbon Black—Iodine Adsorption Number
Hardcopy , PDF
28-04-2020
English
01-01-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This test method covers the determination of the iodine adsorption number of carbon black.
| Committee |
D 24
|
| DocumentType |
Test Method
|
| Pages |
10
|
| ProductNote |
THIS STANDARD ALSO REFERES TO : ISO/EN/DIN 8655-3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the determination of the iodine adsorption number of carbon black.
1.1.1Method A is the original test method for this determination and Method B is an alternate test method using automated sample processing and analysis.
1.2The iodine adsorption number of carbon black has been shown to decrease with sample aging. Iodine Number reference materials have been produced that exhibit stable iodine number upon aging. One or more of these reference materials are recommended for daily monitoring (x-charts) to ensure that the results are within the control limits of the individual reference material. Use all Iodine Number reference materials from a set for standardization of iodine testing (see Section 8) when target values cannot be obtained.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7849 : 2018 : REV A | Standard Classification for Nomenclature of Reference Materials of Committee D24 |
| ASTM D 4821 : 2016 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 8043 : 2016 | Standard Guide for Carbon Black—Shelf Life |
| ASTM D 4122 : 2017 : EDT 1 | Standard Practice for Carbon Black—Evaluation of an Industry Reference Black |
| ASTM D 5817 : 2003 : REV A : R2014 | Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing |
| ASTM D 6915 : 2017 : EDT 1 | Standard Practice for Carbon Black—Evaluation of Standard Reference Blacks |
| ASTM D 1765 : 2018 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1900 : 2006 : R2015 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 4821 : 2014 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 4821 : 2001 : REV A | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 1900 : 1994 : R1998 | Standard Practice for Carbon Black-Sampling Bulk Shipments |
| ASTM D 1799 : 1993 : R1997 | Standard Practice for Carbon Black-Sampling Packaged Shipments |
| ASTM D 4483 : 1999 | Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries |
| ASTM D 4483 : 2005 : REV A | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4821 : 2019 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 1799 : 2003 : REV A | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 4821 : 2015 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 4821 : 2003 : REV A | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 1799 : 2003 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 1900 : 2006 | Standard Practice for Carbon Black-Sampling Bulk Shipments |
| ASTM D 4821 : 2004 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 1799 : 2003 : REV A : R2008 | Standard Practice for Carbon Black<span class='unicode'>—</span>Sampling Packaged Shipments |
| ASTM D 1799 : 2002 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 4821 : 2003 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 1900 : 1994 : R2002 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 4821 : 1999 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 4821 : 2016 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 4821 : 2007 | Standard Guide for Carbon Black-Validation of Test Method Precision and Bias |
| ASTM D 4483 : 2005 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4821 : 2001 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 4483 : 2014 : REV A | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4483 : 2014 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4483 : 2018 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4483 : 2005 : REV A : R2011 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4821 : 2006 | Standard Guide for Carbon Black-Validation of Test Method Precision and Bias |
| ASTM D 1900 : 2006 : R2011 | Standard Practice for Carbon Black<char: emdash>Sampling Bulk Shipments |
| ASTM D 4821 : 2005 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 4821 : 2007 : EDT 1 | Standard Guide for Carbon Black<char: emdash>Validation of Test Method Precision and Bias |
| ASTM D 1799 : 2003 : REV A : R2014 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.