ASTM D 1475 : 2013 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Available format(s)
PDF
Language(s)
English
Published date
03-01-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 06.01, 2017 Defines the measurement of density of paints, inks, varnishes, lacquers, and components thereof, other than pigments, when in fluid form.
| Committee |
D 01
|
| DocumentType |
Redline
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This test method covers the measurement of density of paints, inks, varnishes, lacquers, and components thereof, other than pigments, when in fluid form.
1.2For higher precision when working with nonpigmented materials (drying oils, varnishes, resins and related materials), Test Method D1963 can be used to determine specific gravity and, thence, density.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3.1Exception—The values for density are to be stated in inch-pound units.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific precaution statement is given in 8.1.1.1.
| Standards | Relationship |
| ASTM D 2885 : 2020 : REDLINE | Similar to |
| ASTM C 156 : 2017 : REDLINE | Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete |
| SAE AMS 3116 A : 2005 | PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
| DOD-E-18214 Revision B:1978 | ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) |
| SSPC-PAINT 44 : 2013 | LIQUID-APPLIED ORGANIC POLYMERIC COATINGS AND LININGS FOR CONCRETE STRUCTURES IN MUNICIPAL WASTEWATER FACILITIES, PERFORMANCE-BASED |
| MIL-DTL-1115 Revision E:2010 | ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
| DOD-E-1265 Revision D:1977 | ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY No.17 (FORMULA No 5.0) METRIC |
| ASTM D 3806 : 1998 : R2004 | Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method) |
| ASTM D 5860 : 1995 | Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| MIL-P-15930 Revision C:1981 | PRIMER COATING, SHIPBOARD, VINYL-ZINC CHROMATE (FORMULA NO. 120 - FOR HOT SPRAY) |
| DOD P 24631 : (1) SUPP 1 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
| CSA Z245.20-Z245.21 : 2006 | EXTERNAL FUSION BOND EPOXY COATING FOR STEEL PIPE/EXTERNAL POLYETHYLENE COATING FOR PIPE |
| MIL-PRF-32584 Base Document:2017 | Deck Covering Materials, Monolithic |
| MIL-DTL-24631 Revision A:1997 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
| DOD-V-15218 Revision C:1977 | VARNISH (MIXING, PHENOLIC) (METRIC) |
| MIL A 3316 : C | ADHESIVE, FIRE RESISTANT, THERMAL INSULATION |
| DOD-P-15144 Revision B:1977 | PAINT, FORMULA NO. 34 (BINDER FOR ANTI SWEAT COATINGS) (METRIC) |
| MIL-DTL-700 Revision B:1998 | ENAMEL, DECK, INTERIOR, GRAY, (FORMULA NO. 20L) (METRIC) |
| MIL-C-46168 Revision D:1987 | COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| MIL-DTL-24441 Revision D:2009 | PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
| AASHTO M 300 : 2003 | SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER |
| ASTM D 3927 : 1987 | Guide for State and Institutional Purchasing of Paint (Withdrawn 1991) |
| MIL-PRF-32171 Revision B:2009 | DECK COATINGS, HIGH DURABILITY |
| MIL-R-15189 Revision B:1986 | RESIN, ALKYD PHENOLIC |
| MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
| MIL C 47257 : C | COMPOUND, EPOXY, FILAMENT WINDING |
| TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
| TT-P-641 Revision G:1976 | PRIMER, PAINT, ZINC DUST-ZINC OXIDE (FOR GALVANIZED SURFACES) |
| ASTM D 5860 : 1995 : R2007 | Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
| ASTM D 5286 : 2001 : R2017 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
| SAE AMS C 27725 : 2016 | COATING, CORROSION PREVENTATIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS, FOR USE TO 250 DEGREES F (121 DEGREES C) |
| ASTM D 5066 : 1991 : R2017 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis |
| SAE AMS 3126 : 2013 | Aluminum Coating Material, Corrosion and Heat Resistant Thermosetting, Inorganic Binder |
| ASTM D 6686 : 2001 : R2008 : EDT 1 | Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
| ASTM D 3065 : 2001 : R2013 | Standard Test Methods for Flammability of Aerosol Products (Withdrawn 2022) |
| ASTM D 4142 : 1989 : R2017 | Standard Guide for Testing Epoxy Resins |
| ASTM D 6686 : 2001 | Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
| ASTM D 2805 : 2011 : R2018 | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 6577 : 2015 : REDLINE | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 6093 : 1997 : R2003 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
| ASTM D 6532 : 2000 : R2014 | Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens |
| ASTM E 1795 : 2017 : REDLINE | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 5860 : 1995 : R2002 | Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
| ASTM D 5201 : 2005 : REV A | Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings |
| ASTM D 8008 : 2015 | Standard Practice for Representative Field Sampling of Traffic Paints |
| ASTM D 6266 : 2000 : REV A | Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM F 940 : 1999 : R2013 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM D 5913 : 1996 : R2013 | Standard Test Method for Evaluation of Cleanability of Paint Brushes |
| ASTM E 1868 : 2010 | Standard Test Method for Loss-On-Drying by Thermogravimetry |
| ASTM F 940:1999 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM D 5150 : 1992 : R2017 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
| ASTM D 6237 : 2009 : R2015 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM D 5913 : 1996 : R2003 | Standard Test Method for Evaluation of Cleanability of Paint Brushes |
| ASTM D 7489 : 2009 | Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions |
| ASTM C 1241 : 2014 : REDLINE | Standard Test Method for Volume Shrinkage of Latex Sealants During Cure |
| ASTM D 3925 : 2002 : R2010 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 961 : 1986 : R1995 : EDT 1 | Standard Specification for Dehydrated Castor Oil |
| ASTM D 5066 : 1991 : R2001 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis |
| ASTM D 7073 : 2005 | Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films |
| ASTM E 1797 : 2012 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 3105 : 2017 : REDLINE | Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
| ASTM D 6093 : 1997 : R2016 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
| ASTM D 5066 : 1991 : R2011 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis |
| ASTM D 7072 : 2004 | Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings |
| MIL-DTL-53084 Revision B:2011 | Primer, Cathodic Electrodeposition, Chemical Agent Resistant |
| SAE AMS 3109 : 2014 | PRIMER, ADHESIVE, ELECTRODEPOSITED -55 TO +82 DEGREES C (-67 TO +180 DEGREES F) |
| ASTM D 344 : 2011 : R2016 | Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts (Withdrawn 2018) |
| MIL-C-81945 Revision B:1989 | COATING COMPOUND, WEAPON INSULATION, INTUMESCENT |
| MIL L 46147 : B | LUBRICANT, SOLID FILM, AIR CURED (CORROSION INHIBITING) |
| MIL-C-83231 Revision A:1981 | COATING, POLYURETHANE, RAIN EROSION RESISTANT FOR EXTERIOR AIRCRAFT AND MISSILE PLASTIC PARTS |
| SAE AMS 3166 : 2014 | SOLVENTS, CLEANING, CLEANING PRIOR TO APPLICATION OF SEALING COMPOUNDS |
| SSPC-PAINT 38 : 2013 | SINGLE-COMPONENT MOISTURE-CURE WEATHERABLE ALIPHATIC POLYURETHANE TOPCOAT, PERFORMANCE-BASED |
| DOD-P-15328 Revision D:1978 | PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC) |
| MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
| SAE AMS 3107 : 1983(R2014) | PRIMER, ADHESIVE, CORROSION-INHIBITING, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
| DOD E 700 : A | ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC) |
| MIL-P-24351 Revision A:1985 | PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) |
| MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
| MIL-P-28642 Base Document:1977 | PAINT (TOPCOAT), VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY) |
| SSPC-PAINT 45 : 2013 | TWO-COMPONENT, THICK-FILM POLYUREA AND POLYUREA/POLYURETHANE HYBRID COATINGS, PERFORMANCE-BASED |
| SSPC-PAINT 29 : 2014 | ZINC DUST PIGMENTED PRIMER, PERFORMANCE-BASED |
| ASTM D 5066 : 1991 : R1996 : EDT 1 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis |
| MIL-C-82747 Base Document:1988 | COATING, POLYURETHANE CLEAR, SAFFLOWER OIL MODIFIED ALKYD |
| MIL P 24441 : B | PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR |
| TT-P-1565 Revision B:1978 | PAINT, BOOT TOPPING BLACK |
| MIL-S-53018 Base Document:1983 | SEALER, WELD THROUGH FOR OVERLAPPING SURFACES |
| SSPC-PAINT 24 : 2016 | LATEX EXTERIOR FINISH COAT FOR STEEL SURFACES, PERFORMANCE-BASED |
| ASTM C 733 : 1993 | Standard Test Method for Volume Shrinkage of Latex Sealants (Withdrawn 2000) |
| DOD-P-24655 Base Document:1985 | PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) |
| DOD E 1115 : C | ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
| MIL-P-22298 Revision A:1985 | PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133) |
| TT-P-650 Revision D:1988 | PRIMER COATING, LATEX BASE, INTERIOR, WHITE (FOR GYPSUM WALLBOARD, OR PLASTER) |
| MIL P 53084 : 0 | PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT |
| MIL-DTL-53022 Revision C Interim Revision:2007 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
| AASHTO MP 24 : 2015(R2018) | SPECIFICATION FOR WATERBORNE WHITE AND YELLOW TRAFFIC PAINTS |
| MIL-DTL-53022 Revision E:2012 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
| ASTM D 6904 : 2003 | Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
| MIL-C-29475 Base Document:1994 | COATING, WATER BORNE POLYURETHANE CAMOUFLAGE |
| ASTM D 2697 : 2003 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D 344 : 2011 | Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts |
| ASTM D 5066 : 1991 : R2011 : EDT 1 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis |
| ASTM D 3065 : 2001 : R2006 | Standard Test Methods for Flammability of Aerosol Products |
| ASTM D 7489 : 2009 : R2013 | Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions |
| ASTM D 5913 : 1996 : R2009 : EDT 1 | Standard Test Method for Evaluation of Cleanability of Paint Brushes |
| ASTM D 4958 : 2010 | Standard Test Method for Comparison of the Brush Drag of Latex Paints |
| SSPC-PAINT 36 : 2013 | TWO-COMPONENT WEATHERABLE ALIPHATIC POLYURETHANE TOPCOAT, PERFORMANCE-BASED |
| ASTM D 961 : 1986 : R2001 | Standard Specification for Dehydrated Castor Oil (Withdrawn 2007) |
| ASTM D 5286 : 2001 : R2011 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
| ASTM E 1868 : 2010 : R2015 | Standard Test Methods for Loss-On-Drying by Thermogravimetry |
| ASTM D 3730 : 2017 : REDLINE | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM F 940 : 1999 : R2009 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM D 2697 : 2003 : R2008 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D 5066 : 1991 : R2005 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis |
| ASTM D 5328 : 1992 : R1997 | Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001) |
| ASTM D 5913:1996 | Standard Test Method for Evaluation of Cleanability of Paint Brushes |
| ASTM D 6532 : 2000 : R2006 | Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens |
| ASTM F 718 : 2007 : R2011 : EDT 1 | Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
| ASTM D 5150 : 1992 : R2013 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
| ASTM D 333 : 2001 : R2007 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM D 3925 : 2002 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| NACE SP 01 08 : 2008 | CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS |
| DOD E 24607 : A | ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) |
| SAE AMS 3604 : 2015 | HEAT RESISTANT ALUMINIZED PAINT |
| MIL-P-53032 Base Document:1983 | PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER LATEX TYPE, LEAD AND CHROMATE FREE |
| MIL C 81904 : B | COATING COMPOUND, THERMAL INSULATION, ABLATIVE |
| ASTM D 6686 : 2001 : R2013 | Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
| AASHTO T 155 : 2013(R2017) | METHOD OF TEST FOR WATER RETENTION BY LIQUID MEMBRANE-FORMING CURING COMPOUNDS FOR CONCRETE |
| CSA Z245.20 SERIES : 2014 | PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE |
| NACE TM 04 04 : 2004 | Standard Test Method Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation<br> |
| MIL-DTL-53030 Revision B Interim Revision:2003 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
| MIL L 0046010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| DOD-E-18210 Revision B:1978 | ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC) |
| MIL-P-22299 Revision B:1985 | PAINT, ANTIFOULING, POLYISOBUTYLENE (FORMULA NO. 134) |
| ASTM D 6904 : 2003 : R2013 | Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
| NASA MSFC SPEC 2083 : 2007 | MULTIPROGRAM/PROJECT COMMON USE DOCUMENT FOAM, POLYURETHANE |
| MIL-DTL-53030 Revision D:2011 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
| SSPC-PAINT 23 : 2013 | LATEX PRIMER FOR STEEL SURFACES, PERFORMANCE-BASED |
| MIL-DTL-15090 Revision E:2010 | ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
| ASTM D 6532 : 2000 | Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens |
| ASTM D 6093 : 1997 : R2011 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
| ASTM D 7072 : 2004 : R2013 | Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings |
| AASHTO TP 102 : 2012 | METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
| MIL-P-85499 Base Document:1981 | PRIMER MATERIAL |
| MMM-A-180 Revision C:1979 | ADHESIVE POLYVINYL ACETATE EMULSION |
| ASTM D 5150 : 1992 : R2009 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
| MIL-P-15931 Revision F:1991 | PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
| MIL-P-48333 Base Document:1974 | PROPELLANT, LIQUID |
| ASTM D 7680 : 2010 | Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester |
| MIL P 28641 : 0 | PRIMER COATING, VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY) |
| GOST R 52714:2018 | Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method |
| ASTM F 718 : 2007 | Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
| SSPC-PS 26.00 : 2016 | Aluminum-Pigmented Epoxy Coating System Materials Standard, Performance-Based; Type I for Use Over Blast Cleaned Steel; Type II for Use Over Hand-Cleaned Steel |
| ASTM D 1392 : 1992 : R1998 | Standard Specification for Safflower Oil (Withdrawn 2007) |
| ASTM D 1823 : 2016 : REDLINE | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer |
| ASTM D 3323 : 1980 : R1988 : EDT 1 | Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
| ASTM D 4213 : 2008 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| ASTM D 2697 : 2003 : R2014 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D 4213 : 2008 : R2012 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| ASTM D 333 : 2001 : R2013 | Standard Guide for Clear and Pigmented Lacquers |
| SSPC-PAINT 46 : 2015 | ELASTOMERIC, WATER BASED, HIGH BUILD, FLAT, PERFORMANCE-BASED COATING FOR MASONRY AND CONCRETE |
| ASTM D 4142 : 1989 : R2001 | Standard Guide for Testing Epoxy Resins |
| ASTM F 718 : 2007 : R2017 | Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
| ASTM D 4712 : 1987 : REV A : R1996 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 5286 : 2001 : R2005 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
| ASTM D 7073 : 2005 : R2012 | Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films |
| ASTM D 5201 :2005 | Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings |
| ASTM D 6266 : 2000 : REV A : R2017 | Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 7489 : 2009 : R2017 | Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions |
| ASTM D 2336 : 1999 | Standard Guide for Specifying Factory Applied Wood Coatings (Withdrawn 2008) |
| ASTM C 461 : 2017 : REDLINE | Standard Test Methods for Mastics and Coatings Used With Thermal Insulation |
| MIL-PRF-62218 Revision B:1996 | CORROSION PREVENTIVE COMPOUNDS, COLD APPLICATION (FOR NEW AND FIELD MOTOR VEHICLES AND TRAILERS) |
| MIL-PRF-24596 Revision B:2009 | COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
| ASTM D 5860 : 1995 : R2013 | Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
| MIL-A-81253 Base Document:1965 | ADHESIVE, MODIFIED EPOXY RESIN WITH POLYAMINE CURING AGENT |
| MIL-PRF-47257 Revision F:2010 | COMPOUND, EPOXY, FILAMENT WINDING |
| MIL-P-47276 Revision B:1991 | PRIMER, BONDING |
| MIL-P-7962 Revision D:1980 | PRIMER COATING, CELLULOSE NITRATE MODIFIED ALKYD TYPE, CORROSION INHIBITING, FAST DRYING [FOR SPRAY APPLICATION OVER PRETREATMENT COATING |
| TT-P-002119 Base Document:1980 | PAINT, LATEX BASE, HIGH TRAFFIC AREA, FLAT AND EGGSHELL FINISH (LOW LUSTRE), (FOR INTERIOR USE) |
| SAE AMS 3117 : 2011 | PRIMER ZINC MOLYBDATE |
| TT-C-499 Revision A:1975 | COATING COMPOUND, CHEMICAL RESISTANT, CLEAR |
| TT-C-530 Revision C:1995 | COATING COMPOUND, RUST INHIBITIVE, FISH OIL BASE |
| NACE SP 01 09 : 2009 | FIELD APPLICATION OF BONDED TAPE COATINGS FOR EXTERNAL REPAIR, REHABILITATION, AND WELD JOINTS ON BURIED METAL PIPELINES |
| MIL L 46010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| ASTM D 6763 : 2016 : REDLINE | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| MIL-P-20088 Revision C:1986 | PRESERVATION SOLUTION CONCENTRATE, SONAR SEA CHEST |
| DOD P 24647 : A (2) | PAINT, ANTIFOULING, SHIP HULL (METRIC) |
| MIL-PRF-14105 Revision E:2011 | PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
| MIL P 15183 : B NOTICE 1 | PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC) |
| ASTM D 4142 : 1989 : R1996 : EDT 1 | Standard Guide for Testing Epoxy Resins |
| MIL P 24647 : B | PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
| ASTM D 3069 : 1994 : R2013 | Standard Test Method for Delivery Rate of Aerosol Products (Withdrawn 2022) |
| ASTM D 115 : 2017 : REDLINE | Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
| TT-P-1511 Revision B:1981 | PAINT, LATEX (GLOSS & SEMIGLOSS, TINTS & WHITE) (FOR INTERIOR USE) |
| ASTM D 6904 : 2003 : R2007 | Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
| ASTM D 5286 : 2001 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
| SAE AMS 3146 : 2000 | COATING, INTERIOR AIRCRAFT CABIN LOW HEAT AND SMOKE RELEASE |
| ASTM D 4712 : 1987 : REV A : R2001 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 16 : 2016 : REDLINE | TERMINOLOGY FOR PAINT, RELATED COATINGS, MATERIALS, AND APPLICATIONS |
| ASTM D 5150 : 1992 : R1997 : EDT 1 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
| ASTM D 1462 : 1992 : R1998 | Standard Specification for Refined Soybean Oil (Withdrawn 2007) |
| ASTM D 3806 : 1998 | Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method) |
| ASTM D 4142 : 1989 : R2009 | Standard Guide for Testing Epoxy Resins |
| ASTM D 6237 : 2009 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM D 7768 : 2012 | Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography |
| ASTM D 3065 : 2001 | Standard Test Methods for Flammability of Aerosol Products |
| ASTM D 5201 : 2005 : REV A : R2014 | Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings |
| ASTM D 333 : 2001 | Standard Guide for Clear and Pigmented Lacquers |
| SSPC-PAINT 39 : 2015 | TWO-COMPONENT ALIPHATIC POLYUREA TOPCOAT, FAST- OR MODERATE-DRYING, PERFORMANCE-BASED |
| ASTM D 5150 : 1992 : R2003 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
| ASTM D 5324 : 2016 : REDLINE | Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM D 6686 : 2001 : R2008 : EDT 2 | Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| DOD-C-24654 Base Document:1985 | COATINGS, EPOXY, PORTABLE WATER TANKS (METRIC) |
| ASTM F 940 : 1999 : R2005 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| AASHTO TP 102 : 2012 : R2015 | METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
| NACE TM 03 04 : 2004 | OFFSHORE PLATFORM ATMOSPHERIC AND SPLASH ZONE MAINTENANCE COATING SYSTEM EVALUATION |
| MIL-C-81947 Revision A:1975 | COATING COMPOUND, THERMAL INSULATION, THREE-COMPONENT, INTUMESCENT |
| ASTM D 2452 : 2015 : REDLINE | Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds |
| TT-C-001951 Base Document:1976 | COATING, CLEAR (SATIN FINISH), POLYURETHANE, LATEX, FOR INTERIOR USE |
| ASTM D 3288 : 2003 | Standard Test Methods for Magnet-Wire Enamels |
| ASTM D 7088 : 2017 | Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry |
| DOD-E-699 Revision D:1978 | ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO.20) (METRIC) |
| DOD-E-698 Revision C:1978 | ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24) |
| AASHTO R 31 : 2009 : R2014 | PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL |
| NACE TM 02 04 : 2004 | EXTERIOR PROTECTIVE COATINGS FOR SEAWATER IMMERSION SERVICE |
| DOD-P-15146 Revision B:1977 | PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC) |
| ASTM D 3806 : 1998 : R2011 | Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method) |
| MIL E 15145 : C | ENAMEL, ZINC DUST PIGMENTED, FRESH WATER TANK PROTECTIVE, FORMULA NO. 102 |
| MIL-A-82842 Base Document:1983 | ADHESIVE, CONDUCTIVE, LOW RESISTIVITY |
| MIL-A-47284 Revision A:1991 | ADHESIVE, EPOXY RESIN BASE |
| MIL-PRF-24647 Revision E:2013 | PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL |
| ASTM D 8163 : 2017 | Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings |
| ASTM D 3288/D3288M : 2015 : REDLINE | Standard Test Methods for Magnet-Wire Enamels |
| MIL-N-48263 Base Document:1974 | 1-NITRO-2-PROPANOL (NPL) |
| ASTM D 3806 : 1998 : R2016 | Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method) |
| SAE AMS 3167 : 2005 | SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS |
| ASTM D 2932 : 1980 : R1988 : EDT 1 | Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
| ASTM D 2805 : 2011 | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 7072 : 2004 : R2009 | Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings |
| NACE TM 01 04 : 2004 | OFFSHORE PLATFORM BALLAST WATER TANK COATING SYSTEM EVALUATION |
| ASTM D 6266 : 2000 : REV A : R2011 | Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 6266 : 2000 : REV A : R2005 | Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 3925 : 2002 : R2015 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 6093 : 1997 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
| ASTM D 4712 : 1987 : REV A : R2005 | Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
| ASTM D 6511/D6511M : 2011-07 | TEST METHODS FOR SOLVENT BEARING BITUMINOUS COMPOUNDS |
| ASTM D 2205 : 2015 : REDLINE | Standard Guide for Selection of Tests for Traffic Paints |
| ASTM E 1797 : 2012 : R2017 : EDT 1 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 5201 : 2005 : REV A : R2010 | Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings |
| ASTM D 4143 : 2016 : REDLINE | Standard Guide for Testing Latex Vehicles |
| ASTM D 4958 : 2010 : R2016 | Standard Test Method for Comparison of the Brush Drag of Latex Paints |
| ASTM D 1641 : 2004 | Standard Practice for Conducting Outdoor Exposure Tests of Varnishes (Withdrawn 2013) |
| SSPC-PAINT 43 : 2012 | DIRECT-TO-METAL ALIPHATIC POLYUREA COATING, PERFORMANCE-BASED |
| ASTM E 180 : 2003 | Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.