ASTM D 1457 : 1992
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996)
Superseded date
18-02-2021
Published date
31-12-2010
Sorry this product is not available in your region.
CONTAINED IN VOL 08.01 1997 Describes molding and extrusion resins of polytetrafluoroethylene that have not been melted after molding or preforming and which are normally processed in ways like those used in powder metallurgy or by ram extrusion or ceramics or extrusion with a volatile aid.
| Committee |
ASTM
|
| DevelopmentNote |
Supersedes L P 403 (C). (05/2004)
|
| DocumentType |
Standard
|
| ProductNote |
Supersedes L P 403 (C). (SRI 05/2004)
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| Supersedes |
| MIL-DTL-55235 Revision A:2003 | CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES TPS, GENERAL SPECIFICATION |
| ASTM D 3960 : 2005 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM D 3960 : 2005 : R2013 | Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings |
| DIN 65374:1989-11 | AEROSPACE; POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS AND MOULDED PARTS; TECHNICAL SPECIFICATION |
| SAE AS 4388 : 2013 | HOSE ASSEMBLY PTFE HEAVY DUTY, -65 TO 400 DEGREES F (-55 TO 204 DEGREES C) 8000 PSI (56000 KPA) HYDRAULIC AND PNEUMATIC |
| MIL H 26633 : C | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, OXYGEN |
| MIL-I-23594 Revision C:1988 | INSULATION TAPE, ELECTRICAL, HIGH TEMPERATURE, POLYTETRAFLUOROETHYLENE, PRESSURE SENSITIVE |
| MIL-C-45113 Revision B:1983 | COMPOSITION B-3 |
| MIL-DTL-24800 Base Document:1996 | CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS |
| MIL-C-26637 Revision A:1987 | CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES LT |
| MIL V 24509 : A | VALVES, FLANGED, BALL & PLUG FOR SEWAGE & SEA WATER SERVICE |
| MIL-P-24396 Revision A:1994 | PACKING MATERIAL, BRAIDED PTFE (POLYTETRAFLUOROETHYLENE) |
| MIL I 82736 : A | IGNITION PELLETS, MAGNESIUM-FLUOROCARBON |
| MIL-C-8603 Revision B:1984 | CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
| MIL H 83298 : A | HOSE, TETRAFLUOROETHYLENE, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI) HYDRAULIC AND PNEUMATIC |
| MIL-W-83970 Revision B:1981 | Wing and Rolleron Assembly, AIM-9 |
| MIL H 27267 : B | HOSE TETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE |
| MIL-P-22241 Revision B:1973 | PLASTIC SHEET (AND FILM) POLYTETRAFLUOROETHYLENE (TFE-FLUOROCARBON RESIN) |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| MIL-H-38360 Revision B:1966 | HOSE, ASSEMBLIES, TETRAFLUOROETHYLENE, HIGH-TEMPERATURE, HIGH PRESSURE, 3000 PSI HYDRAULIC AND PNEUMATIC |
| MIL-E-15330 Revision D:1977 | EXPANSION JOINT, PIPE, SYNTHETIC RUBBER, FIRE RETARDANT (NAVY) |
| MIL-T-24388 Revision C:1990 | THERMOCOUPLE AND RESISTANCE TEMPERATURE ELEMENT ASSEMBLIES, GENERAL SPECIFICATION FOR (NAVAL SHIPBOARD) |
| DEFSTAN 47-12/4(1987) : 1987 | POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT |
| MIL P 24074 : B NOTICE 1 | POLYTETRAFLUOROETHYLENE PARTS AND COATINGS AND POLYAMIDE PARTS |
| MIL H 38390 : C | HOSE ASSEMBLY, TETRAFLUOROETHYLENE PNEUMATIC, HIGH PRESSURE |
| MIL C 31031 : 0 | CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES GENERAL SPECIFICATION FOR |
| MIL C 15370 : F | COUPLERS, DIRECTIONAL GENERAL SPECIFICATION FOR |
| MIL S 8516 : F | SEALING COMPOUND, POLYSULFIDE RUBBER, ELECTRIC CONNECTORS AND ELECTRICAL SYSTEMS CHEMICALLY CURED |
| MIL-PRF-82736 Revision A:1988 | Ignition Pellets, Magnesium-Fluorocarbon |
| MIL-T-55155 Revision C:1993 | TERMINALS, FEEDTHRU (INSULATED) AND TERMINALS, STUD (INSULATED AND NONINSULATED), GENERAL SPECIFICATION FOR |
| SAEITC TSC47-012_04 | POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT |
| MIL-P-82810 Base Document:1986 | |
| MIL C 27072 : B | CABLE, POWER, ELECTRICAL & CABLE, SPECIAL PURPOSE ELECTRICAL, MULTICONDUCTOR & SINGLE-SHIELDED - GENERAL SPECIFICATION FOR |
| MIL H 85800 : 0 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR |
| MIL-A-24780 Base Document:1992 | ACTUATING ASSEMBLY, SINGLE LINEAR MOTION, FOR THE REMOTE ACTUATION OF QUICK ACTING VALVES, GENERAL SPECIFICATION FOR |
| MIL-P-48296 Base Document:1974 | POLYTETRAFLUOROETHYLENE (PTFE) |
| MIL-DTL-22529 Revision D:1996 | GROMMET, EDGING |
| MIL-PRF-8516 Revision G:1997 | SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED |
| ASTM D 4967 : 1999 | Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables |
| ASTM D 4967 : 1999 : R2009 | Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables |
| ASTM D 3960 : 2005 : R2018 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM E 911 : 1998 : R2015 | Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs |
| ASTM E 911 : 1998 | Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs |
| ASTM E 911 : 1998 : R2009 | Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs |
| ASTM D 5577 : 1994 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
| ASTM E 911 : 1998 : R2004 | Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs |
| ASTM D 5977 : 2015 : REDLINE | Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures |
| ASTM D 5577 : 1994 : R2003 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 5577 : 1994 : R2010 : EDT 1 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics (Withdrawn 2019) |
| ASTM D 4967 : 1999 : R2013 | Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables |
| ASTM F 1109 : 1987 | Specification for Porous Composites of Polytetrafluoroethylene and Carbon for Surgical Implant Applications (Withdrawn 1993) |
| ASTM D 5212 : 2003 | Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures (Withdrawn 2004) |
| ASTM F 423 : 1995 | Standard Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002) |
| ASTM F 1545 : 2015 : REV A | Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges |
| ASTM E 911 : 1998 : R2021 | Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs |
| ASTM D 5977 : 2015 | Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures |
| ASTM D 5577 : 2019 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
| SAE MA 1975 : 2015 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 135 DEGREE C, STANDARD DUTY, 28000/21000 KPA, HYDRAULIC, AIRCRAFT SYSTEMS |
| ASTM D 4967 : 1999 : R2004 : EDT 1 | Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables |
| SAE MA 2007A : 2015 | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, LIGHTWEIGHT, 204 DEGREE C, 21000 KPA HYDRAULIC, METRIC |
| ASTM E 380 : 1993 | Standard Practice for Use of the Internation System of Units (SI) (the Modernized Metric System) (Withdrawn 1997) |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ASTM D 3297 : 1993 | Practice for Molding and Machining Tolerances for PTFE Resin Parts (Withdrawn 1997) |
| ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ASTM D 1895 : 2017 : REDLINE | Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
| ASTM D 3892 : 2015 : REDLINE | PRACTICE FOR PACKAGING/PACKING OF PLASTICS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.