ASTM D 1364 : 2022
Current
The latest, up-to-date edition.
Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
Hardcopy , PDF
English
10-01-2022
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 01
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers the determination of water in volatile solvents and chemical intermediates used in paint, varnish, lacquer, and related products.
1.2This test method is not applicable in the presence of mercaptans, peroxides, or appreciable quantities of aldehydes or amines.
1.3For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5For hazard information and guidance, see the supplier’s Material Safety Data sheet.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 5441 : 2021 | Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography |
| ASTM D 3329 : 2003 : R2017 | Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography |
| ASTM D 1718 : 2009 : R2017 | Standard Specification for Isobutyl Acetate (95 % Grade) |
| ASTM D 4307 : 2017 : R2021 | Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards |
| ASTM D 1569 : 2005 : R2014 | Standard Test Methods for Detergent Alkylate (Withdrawn 2023) |
| ASTM D 770 : 2011 : R2019 | Standard Specification for Isopropyl Alcohol<sup>,</sup> |
| ASTM D 304 : 2011 : R2019 | Standard Specification for <emph type="bdit">n</emph>-Butyl Alcohol (Butanol) |
| ASTM D 1631 : 2010 : R2018 : EDT 1 | Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method |
| ASTM D 3622 : 2011 : R2019 | Standard Specification for 1-Propanol (<emph type="bdit">n</emph>-Propyl Alcohol) |
| ASTM D 4416 : 2009 : R2017 | Standard Specification for Acrylic Acid |
| ASTM D 2634 : 2007 : R2021 | Standard Specification for Methyl Amyl Acetate (95 % Grade) |
| ASTM D 890 : 2012 : R2016 | Standard Test Method for Water in Liquid Pine Chemicals |
| ASTM D 4360 : 2011 : R2019 | Standard Specification for Methyl <emph type="bdit">n</emph>-Amyl Ketone |
| ASTM D 740 : 2011 : R2019 | Standard Specification for Methyl Ethyl Ketone<sup>,</sup> |
| ASTM D 3548 : 2009 : R2017 | Standard Specification for Ethyl Acrylate |
| ASTM D 1719 : 2011 : R2019 | Standard Specification for Isobutyl Alcohol<sup>,</sup> |
| ASTM D 330 : 2007 : R2021 | Standard Specification for 2-Butoxyethanol |
| ASTM D 3130 : 2011 : R2019 | Standard Specification for <emph type="bdit">n</emph>-Propyl Acetate (96 % Grade) |
| ASTM D 3893 : 2003 : R2017 | Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography |
| ASTM D 7875 : 2020 | Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography |
| ASTM D 3128 : 2007 : R2021 | Standard Specification for 2-Methoxyethanol |
| ASTM D 4614 : 2011 : R2019 | Standard Specification for Ethyl Acetate (All Grades) |
| ASTM D 1310 : 2014 : R2021 | Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
| ASTM D 329 : 2007 : R2021 | Standard Specification for Acetone |
| ASTM D 2917 : 2007 : R2021 | Standard Specification for Methyl Isoamyl Ketone |
| ASTM D 5137 : 2007 : R2021 | Standard Specification for Hexyl Acetate |
| ASTM D 1007 : 2011 : R2019 | Standard Specification for <emph type="bdit">sec</emph>-Butyl Alcohol<sup>,</sup> |
| ASTM D 4171 : 2021 | Standard Specification for Fuel System Icing Inhibitors |
| ASTM E 203 : 2016 | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| ASTM D 608 : 2005 : R2019 | Standard Specification for Dibutyl Phthalate |
| ASTM D 4836 : 2009 : R2017 | Standard Specification for Dipropylene Glycol Monomethyl Ether |
| ASTM D 3131 : 2007 : R2021 | Standard Specification for Isopropyl Acetate (99 % Grade) |
| ASTM D 2190 : 2007 : R2021 | Standard Specification for Vinyl Acetate |
| ASTM D 7920 : 2021 | Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography |
| ASTM D 5501 : 2020 | Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography |
| ASTM D 331 : 2011 : R2019 | Standard Specification for 2-Ethoxyethanol<sup>,</sup> |
| ASTM D 7090 : 2004 : R2018 | Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography |
| ASTM D 2916 : 2009 : R2017 | Standard Specification for Isophorone |
| ASTM D 4337 : 1989 : R2017 | Standard Test Methods for Analysis of Linear Detergent Alkylates |
| ASTM D 1500 : 2024 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM D 1500 : 2012 : R2017 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.