ASTM D 1200 : 2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Viscosity by Ford Viscosity Cup
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
01-07-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 06.01, 2017 Describes the viscosity of Newtonian or near-Newtonian paints, varnishes, lacquers, and related liquid materials with the Ford-type efflux viscosity cup.
| Committee |
D 01
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This test method covers the determination of the viscosity of Newtonian or near-Newtonian paints, varnishes, lacquers, and related liquid materials with the Ford-type efflux viscosity cup. If the material is non-Newtonian, that is, shear-thinning or thixotropic, Test Method D2196 should be used.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| MIL P 52977 : 0 | PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE |
| MIL-PRF-32239 Revision A:2014 | COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS |
| SAE AMS 3116 A : 2005 | PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
| MIL-P-11520 Revision F:1989 | PRESERVATIVE COATING, RUBBER, FOR RUBBER SURFACES |
| MIL-E-52891 Revision B:1988 | ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE |
| TT-P-2760 Revision A:1994 | PRIMER COATING; POLYURETHANE, ELASTOMERIC |
| MIL-DTL-450 Revision D:2011 | COATING COMPOUND, BITUMINOUS SOLVENT TYPE, BLACK (FOR AMMUNITION) |
| MIL-PRF-22750 Revision G:2011 | COATING, EPOXY, HIGH-SOLIDS |
| MIL-L-46159 Revision A:1976 | LACQUER, ACRYLIC, LOW REFLECTIVE, OLIVE DRAB |
| ASTM D 1084 : 2016 : REDLINE | Standard Test Methods for Viscosity of Adhesives |
| CGSB-1.104 : M91 | SEMIGLOSS ALKYD AIR DRYING AND BAKING ENAMEL |
| ASTM D 1084 : 2016 | Standard Test Methods for Viscosity of Adhesives |
| ASTM B 813 : 2016 | Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube |
| ASTM D 3794 : 2018 | Standard Guide for Testing Coil Coatings |
| TT-P-1757 Revision B:1997 | PRIMER COATING, ALKYD BASE, ONE COMPONENT |
| ASTM D 5327 : 1997 : R2007 | Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions |
| ASTM F 940:1999 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM C 1708/C1708M : 2016 | Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements |
| ASTM D 7394 : 2018 | Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers |
| ASTM D 4212 : 2016 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups |
| SAE AMS 3107 : 1983(R2014) | PRIMER, ADHESIVE, CORROSION-INHIBITING, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
| ASTM D 365 : 2001 : R2011 | Standard Guide for Soluble Nitrocellulose Base Solutions |
| ASTM D 365 : 2001 | Standard Guide for Soluble Nitrocellulose Base Solutions |
| CGSB-1.88 : 1992 | GLOSS ALKYD ENAMEL, AIR DRYING AND BAKING |
| TT-P-38 Revision E:1985 | PAINT, ALUMINUM, READY-MIXED |
| ASTM D 5327 : 1997 : R2013 | Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions |
| SAE AMSP21600A | Paint System, Fluorescent, Removable, for Aircraft Application |
| SS-S-1996 Base Document:1976 | SEALER, WATER AND WEATHER RESISTANT, FOR ASPHALT, CONCRETE, AND MASONRY SURFACES |
| TT C 2114 : 0 | COATING, OBLITERATING |
| ASTM D 6577 : 2015 | Standard Guide for Testing Industrial Protective Coatings |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| TT-P-2756 Revision A:1996 | POLYURETHANE COATING - SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUND (VOC) CONTENT |
| A-A-1788 Base Document:1997 | VARNISH, OIL: INTERIOR |
| CGSB-1.69 : 1998 | ALUMINUM PAINT |
| MIL-PRF-81352 Revision C:2005 | COATINGS, AIRCRAFT TOUCH-UP |
| CGSB 1.158 : M89 | CELLULOSE NITRATE PRIMER, MODIFIED ALKYD TYPE |
| ASTM F 940 : 1999 : R2009 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM D 5009 : 2002 : R2005 | Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions |
| ASTM D 5286 : 2001 : R2011 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
| ASTM F 940 : 1999 : R2013 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM D 4212 : 2016 : REDLINE | Standard Test Method for Viscosity by Dip-Type Viscosity Cups |
| ASTM D 5009 : 2002 : R2017 | Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions |
| ASTM D 333 : 2001 : R2007 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM D 7887 : 2013 | Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| ASTM F 940 : 1999 : R2005 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| MIL P 46093 : A | PRIMER COATING, SYNTHETIC (FOR BRAKE DRUMS) |
| SAE AMSC27725D | Coating, Corrosion Preventative, for Aircraft Integral Fuel Tanks for Use to 250 °F (121 °C) |
| CGSB-1.105 : M91 | QUICK-DRYING PRIMER |
| ASTM D 333 : 2001 : R2013 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM D 365 : 2001 : R2017 | Standard Guide for Soluble Nitrocellulose Base Solutions |
| ASTM D 4712 : 1987 : REV A : R1996 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 5286 : 2001 : R2005 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
| ASTM D 5009 : 2002 : R2011 | Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions |
| ASTM D 5327 : 1997 : R2002 | Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions |
| ASTM D 2336 : 1999 | Standard Guide for Specifying Factory Applied Wood Coatings (Withdrawn 2008) |
| MIL-P-47276 Revision B:1991 | PRIMER, BONDING |
| TT-S-711 Revision C:1978 | STAIN, OIL TYPE, WOOD, INTERIOR |
| MIL-P-7962 Revision D:1980 | PRIMER COATING, CELLULOSE NITRATE MODIFIED ALKYD TYPE, CORROSION INHIBITING, FAST DRYING [FOR SPRAY APPLICATION OVER PRETREATMENT COATING |
| MIL-P-62669 Base Document:1991 | PRIMER COATING, SYNTHETIC, VOC COMPLIANT (FOR BRAKE DRUMS) |
| CGSB-1.132 : M90 | ZINC CHROMATE PRIMER, LOW MOISTURE SENSITIVITY |
| MIL-PRF-85285 Revision E:2012 | COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
| ASTM D 5009 : 20021 | Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions |
| ASTM D 5286 : 2001 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
| ASTM D 4712 : 1987 : REV A : R2001 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| CGSB 1.143 : 1998 | SILICONE ALKYD HEAT-RESISTANT ALUMINUM ENAMEL |
| ASTM D 365 : 2001 : R2005 | Standard Guide for Soluble Nitrocellulose Base Solutions |
| ASTM D 5327 : 1997 | Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions |
| ASTM D 333 : 2001 | Standard Guide for Clear and Pigmented Lacquers |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| MIL-V-13811 Revision D:1976 | VARNISH, WATERPROOFING, ELECTRICAL, IGNITION |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| MIL-P-24380 Revision B:1989 | PAINT, ANCHOR, CHAIN, SOLVENT TYPE, GLOSS BLACK |
| ASTM B 813 : 2016 : REDLINE | Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube |
| ASTM D 5286 : 2001 : R2017 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
| ASTM C 1708/C1708M : 2016 : REDLINE | Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements |
| ASTM D 6577 : 2015 : REDLINE | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 4712 : 1987 : REV A : R2005 | Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.