ASTM D 1133 : 2013 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
English
01-06-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 06.04, 2017 Defines the determination of the relative solvent power of hydrocarbon solvents used in paint and lacquer formulations.
| Committee |
D 01
|
| DocumentType |
Redline
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This test method covers the determination of the relative solvent power of hydrocarbon solvents used in paint and lacquer formulations. This test method is suitable for use with solvents having an initial boiling point over 40°C and a dry point under 300°C when determined in accordance with the procedures in Note 1.
1.2For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.
| Standards | Relationship |
| UNE 48072:1960 | Identical |
| MIL-PRF-680 Revision C:2010 | DEGREASING SOLVENT |
| ASTM D 1836 : 2007 : R2013 | Standard Specification for Commercial Hexanes |
| ASTM D 3734 : 2005 : R2018 | Standard Specification for High-Flash Aromatic Naphthas |
| IPC CH 65 : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
| IPC CH 65 CHINESE : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
| ASTM D 3734 : 2005 | Standard Specification for High-Flash Aromatic Naphthas |
| ASTM D 3734 : 2005 : R2010 | Standard Specification for High-Flash Aromatic Naphthas |
| ASTM D 3836 : 2013 : REDLINE | Standard Practice for Evaluation of Automotive Polish |
| ASTM D 268 : 2001 : R2007 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| ASTM D 3735 : 2007 | Standard Specification for VMP Naphthas |
| ASTM D 235 : 2002 : R2012 | Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) (Withdrawn 2021) |
| ASTM D 268 : 2001 : R2012 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material (Withdrawn 2021) |
| ASTM D 1569 : 2005 | Standard Test Methods for Detergent Alkylate |
| ASTM D 4302 : 2014 : REDLINE | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
| ASTM D 2884 : 1993 : R1998 | Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method |
| ASTM D 3735 : 2007 : R2012 | Standard Specification for VM&P Naphthas (Withdrawn 2021) |
| ASTM D 235 : 2002 | Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) |
| SAE AMS 3160 : 2016 | SOLVENT, PETROLEUM |
| ASTM D 1569 : 2005 : R2014 | Standard Test Methods for Detergent Alkylate (Withdrawn 2023) |
| ASTM D 235 : 2002 : R2007 | Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) |
| ASTM D 2884 : 1993 : R2002 | Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method |
| 12/30239867 DC : 0 | BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| ASTM D 1836 : 2007 | Standard Specification for Commercial Hexanes |
| ASTM D 2889 : 1995 : R2015 | Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels |
| ASTM D 268 : 2001 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| ASTM C 957/C957M : 2017 : REDLINE | Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface |
| 07/30091745 DC : 0 | BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.