ASTM D 1079 : 2008 : REV A
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Roofing and Waterproofing
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
01-02-2008
| Committee |
D 08
|
| DocumentType |
Reference Material
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| ASTM D 5957 : 1998 : R2013 | Standard Guide for Flood Testing Horizontal Waterproofing Installations |
| ASTM D 6694/D6694M : 2015 | Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems |
| ASTM C 717 : 2019 | Standard Terminology of Building Seals and Sealants |
| ASTM D 7530/D7530M : 2017 | Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules |
| ASTM D 6622/D6622M : 2001 : R2018 : EDT 1 | Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems |
| ASTM E 1399/E1399M : 1997 : R2017 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM D 6451/D6451M : 1999 : R2014 : EDT 1 | Standard Guide for Application of Asphalt Based Protection Board |
| ASTM C 1127/C1127M : 2015 | Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface |
| ASTM D 5898/D5898M : 1996 : R2013 | Standard Guide for Standard Details for Adhered Sheet Waterproofing |
| ASTM D 6383/D6383M : 1999 : R2015 | Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
| ASTM D 5076/D5076M : 2013 : R2019 | Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes |
| ASTM D 1327/D1327M : 2004 : R2012 : EDT 1 | Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing |
| ASTM D 7832/D7832M : 2014 | Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces) |
| ASTM D 7954/D7954M : 2015 : REV A | Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners |
| ASTM D 5295/D5295M : 2018 | Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems |
| ASTM D 146/D146M : 2004 : R2012 : EDT 1 | Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing |
| ASTM D 5636/D5636M : 1994 : R2017 | Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials |
| ASTM C 981 : 2005 : R2013 | Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks |
| ASTM D 6947/D6947M : 2016 | Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System |
| ASTM D 4869/D4869M : 2016 : REV A | Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing |
| ASTM D 6163/D6163M : 2016 | Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements |
| ASTM D 3462/D3462M : 2019 | Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules |
| ASTM D 226/D226M : 2017 | Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing |
| ASTM D 6380/D6380M : 2003 : R2018 | Standard Specification for Asphalt Roll Roofing (Organic Felt) |
| ASTM D 7425/D7425M : 2013 | Standard Specification for Spray Polyurethane Foam Used for Roofing Applications |
| ASTM D 3909/D3909M : 2014 | Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules |
| ASTM D 8051/D8051M : 2016 | Standard Specification for Wax-Modified Asphalt Used in Roofing |
| ASTM E 2777 : 2014 | Standard Guide for Vegetative (Green) Roof Systems |
| ASTM D 1970/D1970M : 2018 | Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection |
| ASTM E 2266 : 2011 | Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion |
| ASTM D 8014 : 2017 | Standard Guide for Selection of Membranes Used in Vegetative Roofing Systems |
| ASTM D 7119/D7119M : 2013 : REV A | Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing |
| ASTM D 5726 : 1998 : R2013 | Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing |
| ASTM D 7877 : 2014 | Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes |
| ASTM D 2178/D2178M : 2015 : REV A | Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing |
| ASTM D 5469/D5469M : 2012 | Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems (Withdrawn 2021) |
| ASTM D 6381/D6381M : 2015 | Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance |
| ASTM D 7655/D7655M : 2012 : R2017 | Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems |
| ASTM D 7636/D7636M : 2011 : R2019 | Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems |
| ASTM D 5665/D5665M : 1999 : REV A : R2014 : EDT 1 | Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing |
| ASTM D 7586/D7586M : 2011 | Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies (Withdrawn 2020) |
| ASTM D 7186 : 2014 | Standard Practice for Quality Assurance Observation of Roof Construction and Repair |
| ASTM D 6754/D6754M : 2015 | Standard Specification for Ketone Ethylene Ester Based Sheet Roofing |
| ASTM F 412 : 2019 | Standard Terminology Relating to Plastic Piping Systems |
| ASTM D 5849/D5849M : 2007 : R2013 : EDT 1 | Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement) |
| ASTM D 7505/D7505M : 2017 | Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules |
| ASTM D 8231 : 2019 | Standard Practice for the Use of a Low Voltage Electronic Scanning System for Detecting and Locating Breaches in Roofing and Waterproofing Membranes |
| ASTM D 312/D312M : 2016 : REV A | Standard Specification for Asphalt Used in Roofing |
| ASTM D 8052/D8052M : 2017 | Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies |
| ASTM D 7052/D7052M : 2017 | Standard Test Method for Determining Impact Resistance of New Low Slope Roof Membranes Using Steel Balls (Z8295Z) |
| ASTM C 1153 : 2010 : R2015 | Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging |
| ASTM E 241 : 2009 : R2014 : EDT 1 | Standard Guide for Limiting Water-Induced Damage to Buildings |
| ASTM D 6294/D6294M : 2013 : R2019 | Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing |
| ASTM D 4601/D4601M : 2004 : R2012 : EDT 1 | Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing |
| ASTM D 5405/D5405M : 1998 : R2015 | Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material |
| ASTM D 5869/D5869M : 2007 : REV A : R2018 : EDT 1 | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
| ASTM D 7105/D7105M : 2006 : R2019 : EDT 1 | Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems |
| ASTM D 7492/D7492M : 2016 : REV A | Standard Guide for Use of Drainage System Media with Waterproofing Systems |
| ASTM D 5843/D5843M : 1995 : R2014 : EDT 1 | Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing (Withdrawn 2023) |
| ASTM D 2626/D2626M : 2004 : R2012 : EDT 1 | Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing |
| ASTM D 3161/D3161M : 2019 | Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method) |
| ASTM D 6221/D6221M : 2000 : R2014 : EDT 1 | Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing |
| ASTM D 7053/D7053M : 2017 | Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs |
| ASTM D 4990 : 1997 : REV A : R2013 | Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing |
| ASTM E 1749 : 2018 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
| ASTM D 6509/D6509M : 2016 | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements |
| ASTM D 6083/D6083M : 2018 | Standard Specification for Liquid Applied Acrylic Coating Used in Roofing |
| ASTM D 6630/D6630M : 2016 | Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance |
| ASTM D 7693/D7693M : 2015 | Standard Guide for Application of Heat Weldable Modified Bituminous Waterproofing Membranes Systems for New Concrete Decks |
| ASTM C 957/C957M : 2017 | Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface |
| ASTM D 6164/D6164M : 2016 | Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements |
| ASTM D 4897/D4897M : 2016 | Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing |
| ASTM D 6382/D6382M : 1999 : R2017 | Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material |
| ASTM D 7349/D7349M : 2015 | Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners |
| ASTM D 6455 : 2011 : R2018 | Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs) |
| ASTM D 1668/D1668M : 1997 : REV A : R2014 : EDT 1 | Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing |
| ASTM D 6162/D6162M : 2016 | Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
| ASTM D 4811/D4811M : 2016 | Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing |
| ASTM D 5683/D5683M : 1995 : R2017 | Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes |
| ASTM D 7851 : 2017 | Standard Guide for Design of Sustainable, Low-Slope Roofing Systems |
| ASTM D 6222/D6222M : 2016 | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements |
| ASTM D 6298/D6298M : 2016 | Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface |
| ASTM D 6223/D6223M : 2016 | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.