ASTM D 1071 : 2017
Current
The latest, up-to-date edition.
Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
Hardcopy , PDF
English
01-04-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 05.06, 2017 Defines the volumetric measuring of gaseous fuel samples, including liquefied petroleum gases, in the gaseous state at normal temperatures and pressures.
| Committee |
D 03
|
| DocumentType |
Test Method
|
| Pages |
13
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover the volumetric measuring of gaseous fuel samples, including liquefied petroleum gases, in the gaseous state at normal temperatures and pressures. The apparatus selected covers a sufficient variety of types so that one or more of the methods prescribed may be used for laboratory, control, reference, or in fact any purpose where it is desired to know the quantity of gaseous fuel or fuel samples under consideration. The various types of apparatus are listed in Table 1.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 3195/D3195M : 2010 | Standard Practice for Rotameter Calibration |
| ASTM D 3685/D3685M : 2013 : REDLINE | Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases |
| CSA Z223.1 : 0 | METHOD FOR THE DETERMINATION OF PARTICULATE MASS FLOWS IN ENCLOSED GAS STREAMS |
| ASTM D 1607 : 1991 : R2005 | Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction) |
| ASTM D 4536 : 1996 | Standard Test Method for High-Volume Sampling for Solid Particulate Matter and Determination of Particulate Emissions (Withdrawn 2000) |
| ASTM D 1607 : 1991 : R2011 | Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction) |
| ASTM D 3195 : 1990 : R1998 : EDT 1 | Standard Practice for Rotameter Calibration |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| ASTM D 3266 : 1991 : R2005 | Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
| ASTM D 3195 : 1990 : R2004 | Standard Practice for Rotameter Calibration |
| ASTM D 1607 : 1991 : R2000 : EDT 1 | Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction) |
| ASTM D 3608 : 1995 : R2011 | Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
| ASTM D 3267 : 2012 : REDLINE | Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method) |
| ASTM D 3608 : 1995 : R2005 | Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
| ASTM D 1704M : 1995 | Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filtered Sample (Metric) (Withdrawn 1998) |
| ASTM D 3266 : 1991 : R2018 | Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
| ASTM D 3608 : 1995 : R2000 : EDT 1 | Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
| ASTM D 3688 : 1978 : R1983 | Guide for Reporting the Characterization of Smoking Product Atmospheres Used to Expose Biological Systems (Withdrawn 1991) |
| ASTM G 125 : 2000 : R2008 | Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| ASTM G 125 : 2000 : R2015 | Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants |
| ASTM D 3266 : 1991 : R2000 : EDT 1 | Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
| ASTM D 3154 : 2014 : REDLINE | Standard Test Method for Average Velocity in a Duct (Pitot Tube Method) |
| ASTM D 3195/D3195M : 2010 : R2015 | Standard Practice for Rotameter Calibration |
| ASTM D 3154 : 2014 | Standard Test Method for Average Velocity in a Duct (Pitot Tube Method) |
| ASTM D 3267 : 2012 | Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method) |
| ASTM D 3685/D3685M : 2013 | Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases |
| ASTM D 5011 : 2017 | Standard Practices for Calibration of Ozone Monitors Using Transfer Standards |
| ASTM D 2863 : 2017 : REV A | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 3608 : 2019 | Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
| ASTM D 5011 : 2017 : REDLINE | Standard Practices for Calibration of Ozone Monitors Using Transfer Standards |
| ASTM G 125 : 2000 | Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants |
| ASTM D 3266 : 1991 : R2011 | Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.