ASTM D 1003 : 2013 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
Available format(s)
PDF
Superseded date
11-06-2021
Superseded by
Language(s)
English
Published date
15-11-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 08.01, 2015 Describes the evaluation of specific light-transmitting and wide-angle-light-scattering properties of planar sections of materials such as essentially transparent plastic.
| Committee |
D 20
|
| DocumentType |
Redline
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This test method covers the evaluation of specific light-transmitting and wide-angle-light-scattering properties of planar sections of materials such as essentially transparent plastic. Two procedures are provided for the measurement of luminous transmittance and haze. Procedure A uses a hazemeter as described in Section 5 and Procedure B uses a spectrophotometer as described in Section 8. Material having a haze value greater than 30 % is considered diffusing and should be tested in accordance with Practice E2387.
1.2The values stated in SI units are to be regarded as standard.
Note 1—For greater discrimination among materials that scatter a high percent of light within a narrow forward angle, such as is the case with abraded transparent plastics, adjust the hazemeter and perform measurements in accordance with Test Method D1044.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Note 2—This test method is not equivalent to ISO 13468-1 and ISO/DIS 14782.
| Standards | Relationship |
| UNE 53340-4:1981 | Identical |
| ASTM D 2673 : 2014 : REDLINE | Standard Specification for Oriented Polypropylene Film |
| ASTM F 1316 : 1990 : R2002 | Standard Test Method for Measuring the Transmissivity of Transparent Parts |
| ASTM D 5436 : 2015 : REDLINE | Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes |
| ASTM F 1164 : 1997 | Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress |
| I.S. EN ISO 13406-2:2002 | ERGONOMIC REQUIREMENTS FOR WORK WITH VISUAL DISPLAYS BASED ON FLAT PANELS - PART 2: ERGONOMIC REQUIREMENTS FOR FLAT PANEL DISPLAYS |
| BS IEC 62341-6-4:2017 | Organic light emitting diode (OLED) displays Measuring methods of transparent properties |
| ASTM D 4649 : 2003 | Standard Guide for Selection and Use of Stretch Wrap Films |
| MIL-PRF-5425 Revision E:1998 | PLASTIC SHEET, ACRYLIC, HEAT RESISTANT |
| MIL-DTL-24191 Revision D:1996 | PLASTIC SHEET, CELL OR CONTINUOUS CAST, ACRYLIC, SHIPBOARD APPLICATION (ILLUMINATION AND SIGNAL LIGHTING) |
| ASTM D 1746 : 2015 : REDLINE | Standard Test Method for Transparency of Plastic Sheeting |
| ASTM F 735 : 2017 : REDLINE | Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method |
| ASTM F 942 : 2002 | Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures |
| ASTM D 4851 : 2007 | Standard Test Methods for Coated and Laminated Fabrics for Architectural Use |
| MIL P 8184 : E | PLASTIC SHEET, ACRYLIC, MODIFIED |
| MIL-P-51406 Revision A:1984 | PLASTIC SHEETS, VINYL CHLORIDE POLYMER AND COPOLYMER, FLEXIBLE |
| ASTM F 1316 : 1990 : R1996 | Standard Test Method for Measuring the Transmissivity of Transparent Parts |
| MIL-B-36419 Base Document:1965 | BAG, URINE COLLECTION, PLASTIC, DISPOSABLE, 50'S |
| MIL-PRF-38169 Revision A:1998 | LENS, GOGGLE AND VISOR, HELMET, OPTICAL CHARACTERISTICS, GENERAL SPECIFICATION FOR |
| ASTM F 803 : 2014 : REDLINE | Standard Specification for Eye Protectors for Selected Sports |
| S.R. CEN ISO/TS 16775:2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 (ISO/TS 16775:2014) |
| CAN/CSA-ISO/TS 16775:17 | Packaging for terminally sterilized medical devices — Guidance on the application of ISO 11607-1 and ISO 11607-2 (Adopted ISO technical specification 16775:2014, first edition, 2014-05-15) |
| ASTM F 942 : 2002 : R2008 | Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| ASTM G 73 : 2010 | Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 4851 : 2007 : R2015 | TEST METHODS FOR COATED AND LAMINATED FABRICS FOR ARCHITECTURAL USE |
| ASTM D 2103 : 2015 : REDLINE | Standard Specification for Polyethylene Film and Sheeting |
| ASTM D 2090 : 1998 | Standard Test Method for Clarity and Cleanness of Paint and Ink Liquids (Withdrawn 2007) |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| ASTM D 5577 : 1994 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
| ASTM E 1164 : 2012 : R2017 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 772 : 2015 : REDLINE | Standard Terminology of Solar Energy Conversion |
| NFPA 1801 : 2018 | THERMAL IMAGERS FOR THE FIRE SERVICE |
| EN 13206:2017 | Plastics - Thermoplastic covering films for use in agriculture and horticulture |
| NFPA 1986 : 2017 | RESPIRATORY PROTECTION EQUIPMENT FOR TACTICAL AND TECHNICAL OPERATIONS |
| CEN ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2014) |
| ASHRAE 189.1 : 2014 | DESIGN OF HIGH-PERFORMANCE GREEN BUILDINGS |
| MIL-M-19417 Revision D:1992 | Mask Assemblies, Oxygen and Smoke, Full Face |
| NFPA 1971:2018 | Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting |
| MIL P 5425 : D | PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT |
| GGG-H-211 Revision D:1985 | HELMETS, WELDERS'; HANDSHIELD, WELDING; AND PLATES, WELDING |
| PD CEN ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices. Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
| ASTM F 2097 : 2016 : REDLINE | Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products |
| BS EN 1096-5:2016 | Glass in building. Coated glass Test method and classification for the self-cleaning performances of coated glass surfaces |
| CSA Z262.2 : 2015 | FACE PROTECTORS FOR USE IN ICE HOCKEY |
| MIL PRF 13455 : D | FILTER, LIGHT (FOR BLACKOUT SECURE) |
| MIL-DTL-43511 Revision D:2006 | VISORS, FLYER'S HELMET, POLYCARBONATE |
| MIL-P-14591 Revision D:1976 | PLASTIC FILM, NONRIGID, TRANSPARENT |
| MIL-PRF-8184 Revision F:1998 | PLASTIC SHEET, ACRYLIC MODIFIED |
| ASTM F 1251 : 1989 : R1995 | Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices |
| A-A-2848 Base Document:1994 | PLASTIC SHEET, POLYETHYLENE TEREPHTHALATE (PET) AND GLYCOL MODIFIED POLYETHYLENE TEREPHTHALATE (PETG) |
| I.S. EN 16314:2013 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| SAE J 576 : 2017 | PLASTIC MATERIAL OR MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLEX REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES |
| ASTM D 788 : 2016 : REDLINE | Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds |
| MIL-S-51422 Revision B:1987 | SHELTER AND ENTRANCE ASSEMBLY - CHEMICAL-BIOLOGICAL SHELTER SYSTEM: INFLATABLE |
| ASTM D 4649 : 2003 : R2016 | Standard Guide for Selection and Use of Stretch Wrap Films |
| ISO 18922:2003 | Imaging materials — Processed photographic films — Methods for determining scratch resistance |
| ISO 10256-3:2016 | Protective equipment for use in ice hockey — Part 3: Face protectors for skaters |
| ASTM E 1164 : 2012 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 8065/D8065M : 2016 | Standard Classification System and Basis for Specification for Specifying Plastic Films |
| ASTM D 4000 : 2016 : REDLINE | Standard Classification System for Specifying Plastic Materials |
| ASTM F 3077 : 2017 : REDLINE | Standard Specification for Eye Protectors for Women’s Lacrosse |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| DIN EN 1359:2007-06 | GAS METERS - DIAPHRAGM GAS METERS |
| DIN EN 13206:2015-09 (Draft) | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| I.S. EN 1359:2017 | GAS METERS - DIAPHRAGM GAS METERS |
| NFPA 1976 : 2000 | PROTECTIVE ENSEMBLE FOR PROXIMITY FIRE FIGHTING |
| ASTM D 5577 : 1994 : R2003 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
| 14/30304116 DC : 0 | BS EN 1359 - GAS METERS - DIAPHRAGM GAS METERS |
| CSA Z262.5 : 2015 | FACE PROTECTORS FOR USE IN RINGETTE |
| ASTM D 1627 : 1994 : R2000 | Standard Test Methods for Chemical Analysis of Acid Copper Chromate (Withdrawn 2006) |
| A-A-55697 Revision B:2012 | Tube, Nonmetallic; Polyvinyl Chloride (PVC) Flexible (for Laboratory and Medical Use) |
| MIL F 62422 : A | FILTER, LASER HAZARD PROTECTION |
| IEC 62805-1:2017 | Method for measuring photovoltaic (PV) glass - Part 1: Measurement of total haze and spectral distribution of haze |
| ASTM D 1044 : 2013 : REDLINE | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| L-P-391 Revision D:1975 | PLASTIC SHEETS, RODS AND TUBING, RIGID CAST, METHACRYLATE (MULTIAPPLICATIONS) |
| MIL-B-24692 Revision A:1993 | BREATHING APPARATUS, OXYGEN GENERATING, TYPE A-4 (METRIC) |
| MIL-B-44315 Base Document:1987 | Body Armor, Chest Plate and Face Shield, Explosive Ordnance Disposal (No S/S Document) |
| ASTM F 1164 : 1997 : R2009 : EDT 1 | Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress |
| MIL P 24191 : D | PLASTIC SHEET, CAST, ACRYLIC, SHIPBOARD APPLICATION (ILLUMINATION AND SIGNAL LIGHTING) |
| MIL-PRF-29610 Base Document:1996 | VISOR ASSEMBLY, MULTIPLE WAVELENGTH LASER PROTECTIVE, AVIATORS |
| MIL-B-36444 Revision A:1977 | BAG, URINE COLLECTION, PEDIATRIC, PLASTIC, DISPOSABLE |
| ONORM EN 14236 : 2008 | ULTRASONIC DOMESTIC GAS METERS |
| AEP-4495 : 2016 | GUIDANCE FOR THE PROCUREMENT OF LASER EYE PROTECTION (LEP) FOR THE INDIVIDUAL MILITARY USER |
| IS 14625 : 2015 | Plastics Feeding Bottles ( First Revision ) |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| PREN 13655 : DRAFT 2016 | PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE |
| ASTM D 3981 : 2009 : REV A : R2016 | Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications |
| ASTM F 1128 : 1988 | Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using Salt Impingement Method (Withdrawn 1996) |
| ASTM G 73 : 2010 : R2017 | Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus |
| ASTM E 1164 : 2012 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| PREN 1359 : DRAFT 2014 | GAS METERS - DIAPHRAGM GAS METERS |
| BS EN 13206:2017 | Plastics. Thermoplastic covering films for use in agriculture and horticulture |
| DIN EN 13206:2017-05 | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| NASA STD 6002 : 2008 | APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS |
| ICC IECC CODE AND COMMENTARY : 2015 | IECC® Code and Commentary |
| ASTM C 1349 : 2017 : REDLINE | Standard Specification for Architectural Flat Glass Clad Polycarbonate |
| IES HB 10 : 2011 | THE LIGHTING HANDBOOK |
| ASTM D 3981 : 2009 : REV A | Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications |
| ASTM F 2812 : 2012 | Standard Specification for Goggle- and Spectacle-Type Eye Protectors for Selected Motor Sports |
| 01/701311 DC : DRAFT FEB 2001 | ISO 18922 - IMAGING MATERIALS - METHOD FOR DETERMINING SCRATCH RESISTANCE OF PROCESSED PHOTOGRAPHIC FILMS |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| ASTM F 943 : 1990 | Test Method for Measuring Halation of Transparent Parts (Withdrawn 1997) |
| MIL-DTL-62422 Revision D:2010 | FILTER, LASER HAZARD PROTECTION |
| IEC 62341-6-4:2017 | Organic light emitting diode (OLED) displays - Part 6-4: Measuring methods of transparent properties |
| ASTM D 4649 : 2003 : R2009 | Standard Guide for Selection and Use of Stretch Wrap Films |
| MIL S 29580 : B | SPECTACLES, AVIATOR'S, MULTIPLE WAVE LENGTH LASER PROTECTIVE, EDU 5 P (WITH CASE) |
| I.S. EN 62805-1:2017 | METHOD FOR MEASURING PHOTOVOLTAIC (PV) GLASS - PART 1: MEASUREMENT OF TOTAL HAZE AND SPECTRAL DISTRIBUTION OF HAZE |
| MIL-C-24449 Revision A:1981 | CAST POLYMETHYL METHACRYLATE FOR SHEET STOCK, CUSTOM CASTINGS AND FINISHED WINDOWS |
| MIL PRF 62422 : B | FILTER, LASER HAZARD PROTECTION |
| 17/30335121 DC : 0 | BS EN 13655 - PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE |
| 15/30323453 DC : 0 | BS EN 62341-6-4 ED 1.0 - ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 6-4: MEASURING METHODS OF TRANSPARENT PROPERTIES |
| ASTM F 1776 : 2016-11 | SPECIFICATION FOR EYE PROTECTIVE DEVICES FOR PAINTBALL SPORTS |
| NFPA 1984 : 2016 | RESPIRATORS FOR WILDLAND FIRE-FIGHTING OPERATIONS |
| ASTM F 1251 : 1989 : R2003 | Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices (Withdrawn 2012) |
| BS EN 62805-1:2017 | Method for measuring photovoltaic (PV) glass Measurement of total haze and spectral distribution of haze |
| ASTM D 1562 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
| MIL-DTL-13455 Revision E:1998 | FILTER, LIGHT (FOR BLACKOUT SECURE) |
| L-P-504 Revision E:1991 | PLASTIC SHEET AND FILM, CELLULOSE ACETATE |
| L-P-1040 Revision B:1977 | PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE) |
| MIL V 43511 : C | VISOR, FLYING HELMET, POLYCARBONATE |
| I.S. EN 13655:2018 | PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE |
| ANSI/AAMI/ISO TIR16775:2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 |
| ASTM D 707 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
| NF EN 14236 : 2007 | ULTRASONIC DOMESTIC GAS METERS |
| ASTM F 1316 : 1990 : R2013 | Standard Test Method for Measuring the Transmissivity of Transparent Parts |
| I.S. EN 13206:2017 | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| BS EN ISO 13406-2:2002 | Ergonomic requirements for work with visual display based on flat panels Ergonomic requirements for flat panel displays |
| ISO 13406-2:2001 | Ergonomic requirements for work with visual displays based on flat panels Part 2: Ergonomic requirements for flat panel displays |
| UNE-EN 13206:2017 | Plastics - Thermoplastic covering films for use in agriculture and horticulture |
| EN ISO 13406-2 : 2001 | ERGONOMIC REQUIREMENTS FOR WORK WITH VISUAL DISPLAYS BASED ON FLAT PANELS - PART 2: ERGONOMIC REQUIREMENTS FOR FLAT PANEL DISPLAYS |
| UNI CEN ISO/TS 16775 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 |
| EN 1359:2017 | Gas meters - Diaphragm gas meters |
| EN 16314:2013 | Gas meters - Additional functionalities |
| ASTM F 1864 : 2016 : REDLINE | Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings |
| ASTM E 2952 : 2017 : REDLINE | Standard Specification for Air-Purifying Respiratory Protective Smoke Escape Devices (RPED) |
| DIN EN 1096-5:2016-06 | GLASS IN BUILDING - COATED GLASS - PART 5: TEST METHOD AND CLASSIFICATION FOR THE SELF-CLEANING PERFORMANCES OF COATED GLASS SURFACES |
| L-P-377 Revision C:1994 | PLASTIC SHEET AND STRIP, POLYESTER |
| BS EN 16314:2013 | Gas meters. Additional functionalities |
| MIL-W-81752 Revision A:1987 | WINDSHIELDED SYSTEM, FIXED WING AIRCRAFT - GENERAL SPECIFICATION FOR |
| ASTM F 942 : 2002 : R2013 | Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures |
| BS ISO 18922:2003 | Imaging materials. Processed photographic films. Methods for determining scratch resistance |
| ASTM F 790 : 2008 | Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
| UNE-EN 16314:2014 | Gas meters - Additional functionalities |
| ASTM D 4851 : 2007 : R2011 | Standard Test Methods for Coated and Laminated Fabrics for Architectural Use |
| MIL-PRF-25690 Revision B:1993 | PLASTIC, SHEET AND FORMED PARTS, MODIFIED ACRYLIC BASE, MONOLITHIC, CRACK PROPAGATION RESISTANT |
| MIL P 008184 : D | PLASTIC SHEET, ACRYLIC, MODIFIED |
| I.S. EN ISO 10256-3:2018 | PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 3: FACE PROTECTORS FOR SKATERS (ISO 10256-3:2016) |
| UNE-EN 1096-5:2017 | Glass in building - Coated glass - Part 5 - Test method and classification for the self-cleaning performances of coated glass surfaces |
| ASTM D 4673 : 2016 : REDLINE | Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
| MIL-P-25374 Revision B:1985 | PLASTIC SHEET, ACRYLIC, MODIFIED, LAMINATED |
| CSA Z94.3 : 2015 | EYE AND FACE PROTECTORS |
| L-P-380 Revision C:1973 | PLASTIC MOLDING MATERIAL METHACRYLATE |
| 16/30344072 DC : 0 | BS EN 62805-1 - METHOD FOR MEASURING PHOTOVOLTAIC (PV) GLASS - PART 1: MEASUREMENT OF TOTAL HAZE AND SPECTRAL DISTRIBUTION OF HAZE |
| DIN EN 16314:2013-09 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| MIL F 13455 : C | FILTER, LIGHT (FOR BLACKOUT SECURITY) |
| IES RP 5 : 2013 | RECOMMENDED PRACTICE FOR DAYLIGHTING BUILDINGS |
| ASTM F 1164 : 1997 : R2014 | Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress |
| A-A-2790 Base Document:1992 | ENVELOPE, TRANSPARENT |
| MIL-PRF-46108 Revision C:1999 | Armor: Transparent |
| MIL A 46108 : B | ARMOR, TRANSPARENT, GLASS; GLASS/PLASTIC; PLASTIC LAMINATES (GENERAL SPECIFICATION) |
| ASTM D 4635 : 2016 : REDLINE | Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications |
| MIL-H-29144 Revision B:1985 | HOOD, FIREMANS,ALUMINIZED, PROXIMITY |
| ASTM F 1164 : 1997 : R2003 | Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress |
| ASTM E 179 : 2017 : REDLINE | Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials |
| MIL PRF 44366 : D | SPECTACLES, PROTECTIVE, LASER, BALLISTIC (BLPS) |
| MIL-V-29591 Base Document:1992 | VISOR ASSEMBLY, AVIATOR'S SEVEN WAVELENGTH LASER PROTECTIVE, GENERAL SPECIFICATION FOR |
| CSA A440 : 2017 | NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS |
| ASTM F 520 : 2016 : REDLINE | Standard Test Method for Environmental Resistance of Aerospace Transparencies to Artificially Induced Exposures |
| UNI EN 16314 : 2013 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| ASTM F 1316 : 1990 : R2008 | Standard Test Method for Measuring the Transmissivity of Transparent Parts |
| I.S. EN 1096-5:2016 | GLASS IN BUILDING - COATED GLASS - PART 5: TEST METHOD AND CLASSIFICATION FOR THE SELF-CLEANING PERFORMANCES OF COATED GLASS SURFACES |
| EN 62805-1:2017 | Method for measuring photovoltaic (PV) glass - Part 1: Measurement of total haze and spectral distribution of haze |
| SAE J 2642 : 2017 | RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS |
| SAE J 1647 : 2015 | PLASTIC MATERIALS AND COATINGS FOR USE IN OR ON OPTICAL PARTS SUCH AS LENSES AND REFLECTORS OF HIGH-INTENSITY DISCHARGE FORWARD LIGHTING DEVICES USED IN MOTOR VEHICLES |
| ANSI Z87.1 : 2015 | OCCUPATIONAL AND EDUCATIONAL PERSONAL EYE AND FACE PROTECTION DEVICES |
| ASTM D 706 : 2015 : REDLINE | Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) |
| ASTM F 790 : 2008 : R2013 | Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
| CSA Z262.8 : 2015 | FACE PROTECTORS FOR USE IN LACROSSE |
| EN 13655:2018 | Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture |
| ASTM F 1863 : 2016 : REDLINE | Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts |
| ASTM D 5577 : 1994 : R2010 : EDT 1 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics (Withdrawn 2019) |
| ASTM D 3981 : 2009 | Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications |
| ASTM E 1420 : 1991 | Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
| NFPA 1981 : 2013 | OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) FOR EMERGENCY SERVICES |
| BS EN 1359:2017 | Gas meters. Diaphragm gas meters |
| EN 1096-5:2016 | Glass in building - Coated glass - Part 5 - Test method and classification for the self-cleaning performances of coated glass surfaces |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ISO 13468-1:1996 | Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument |
| ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
| ASTM D 1044 : 2013 : REDLINE | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ASTM E 2387 : 2 | PRACTICE FOR GONIOMETRIC OPTICAL SCATTER MEASUREMENTS |
| ISO 14782:1999 | Plastics Determination of haze for transparent materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.