ASTM C 921 : 2010 : R2015
Current
Current
The latest, up-to-date edition.
Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation (Withdrawn 2021)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
23-10-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 04.06, 2015 Describes jackets applied over thermal insulation on piping and equipment, including materials applied solely for physical protection, and materials applied as vapor retarders.
| Committee |
C 16
|
| DocumentType |
Standard Practice
|
| Pages |
4
|
| ProductNote |
Reconfirmed 2015
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This practice covers jackets applied over thermal insulation on piping and equipment, including materials applied solely for physical protection, and materials applied as vapor retarders.
1.2This practice provides material and physical requirements, or both, for jackets. Guidance in selecting the proper jacket for a given application can be found in Guide C1423.
1.3This practice does not cover field applied mastics or barrier coatings and their attendant reinforcements, nor does it cover jackets for buried insulation systems.
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM C 755 : 2020 | Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation |
| ASTM C 1126 : 2019 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 547 : 2019 | Standard Specification for Mineral Fiber Pipe Insulation |
| ASTM C 612 : 2014(R2019) | Standard Specification for Mineral Fiber Block and Board Thermal Insulation |
| ASTM C 553 : 2013 : R2019 | Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications |
| ASTM C 1393 : 2019 | Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks |
| ASTM C 1423 : 2021 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM C 592 : 2016 | Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) |
| ASTM E 96/E96M : 2016 : REDLINE | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM C 1423 : 1998 : R2003 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM A 653/A653M : 2001 : REV A | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
| ASTM D 1204 : 2014 : REDLINE | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 1204 : 2007 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM C 1263 : 1995 : R2015 | Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders |
| ASTM A 240/A240M : 2011 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM D 1204 : 2014 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM B 209 : 2014 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM C 1263 : 1995 : R2005 : EDT 1 | Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders |
| ASTM C 1338 : 2000 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM A 240/A240M : 2005 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 792/A792M : 2009 | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
| ASTM A 653/A653M : 2020 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
| ASTM D 1204 : 2008 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM C 1423 : 2021 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM C 1338 : 2014 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM E 84 : 2021 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 774/D774M : 1997 | Standard Test Method for Bursting Strength of Paper |
| ASTM C 1263 : 1995 : R2010 | Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders |
| ASTM D 1204 : 2014 : R2020 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM A 336/A336M : 2019 | Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts |
| ASTM C 1338 : 2019 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM C 1338 : 2008 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM D 828 : 2016 | Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus |
| ASTM E 84 : 2020 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 84 : 2021 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 1423 : 2016 : REDLINE | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM C 1423 : 2015 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM C 1258 : 1994 | Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation |
| ASTM C 1423 : 1998 : R2011 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM C 1423 : 2016 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM A 792/A792M : 2010 : R2015 | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
| ASTM C 1263 : 1995 : R2005 | Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders |
| ASTM C 1258 : 2008 : R2013 | Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation |
| ASTM C 1258 : 2019 | Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation |
| ASTM D 1204 : 1994 : EDT 1 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM A 792/A792M : 2021 : REV A | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
| ASTM C 1258 : 2021 | Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation |
| ASTM C 1263 : 1995 : R2000 | Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders |
| ASTM C 1263 : 1995. | Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders |
| ASTM A 792/A792M : 2021 | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
| ASTM C 1263 : 1995 : R2021 | Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders |
| ASTM C 1423 : 2014 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM D 1204 : 2002 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM A 336/A336M : 2021 | Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts |
| ASTM C 1258 : 2008 | Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation |
| ASTM C 1423 : 2015 : REV A | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM C 1423 : 1998 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| TAPPI T 461 : 2009 | FLAME RESISTANCE OF TREATED PAPER AND PAPERBOARD |
| ASTM C 168 : 2017-06 | TERMINOLOGY RELATING TO THERMAL INSULATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.