ASTM C 764 : 2019
Current
The latest, up-to-date edition.
Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
Hardcopy , PDF
English
01-09-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.This specification covers the composition and physical properties of nodulated mineral fiber thermal insulation for use in attics or enclosed spaces in housing and other framed buildings.
| Committee |
C 16
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers the composition and physical properties of nodulated mineral fiber thermal insulation for use in attics or enclosed spaces in housing and other framed buildings.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 136 : 2024 | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C |
| ASTM C 168 : 2019 | Standard Terminology Relating to Thermal Insulation |
| ASTM C 177 : 2019 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
| ASTM C 1859 : 2023 | Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind Netting) for Enclosed Applications of the Building Thermal Envelope |
| ASTM E 136 : 2024 : REV B | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C |
| ASTM C 1363 : 2019 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
| ASTM C 1304 : 2018 | Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
| ASTM E 136 : 2022 | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C |
| ASTM C 687 : 2018 | Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation |
| ASTM C 870 : 2011 : R2017 | Standard Practice for Conditioning of Thermal Insulating Materials |
| ASTM E 970 : 2017 : EDT 1 | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
| ASTM C 390 : 2008 : R2024 | Standard Practice for Sampling and Acceptance of Thermal Insulation Lots |
| ASTM E 136 : 2019 : REV A | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750°C |
| ASTM C 518 : 2002 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM C 390 : 2008 : R2019 | Standard Practice for Sampling and Acceptance of Thermal Insulation Lots |
| ASTM C 168 : 2024 | Standard Terminology Relating to Thermal Insulation |
| ASTM C 1304 : 2023 | Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
| ASTM C 1859 : 2021 | Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind Netting) for Enclosed Applications of the Building Thermal Envelope |
| ASTM C 1338 : 2019 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM B 152/B152M : 2024 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
| ASTM C 1859 : 2019 | Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind Netting) for Enclosed Applications of the Building Thermal Envelope |
| ASTM C 1374 : 2018 : R2023 | Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation |
| ASTM C 1338 : 2019 : R2022 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM C 1630 : 2019 | Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations |
| ASTM C 687 : 2024 | Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation |
| ASTM C 1363 : 2011 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
| ASTM E 970 : 2023 | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
| ASTM C 1374 : 2018 | Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation |
| ASTM C 518 : 2017 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM C 1630 : 2024 | Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations |
| ASTM B 152/B152M : 2019 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
| ASTM C 1630 : 2011 : R2016 | Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations |
| ASTM C 518 : 2021 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM C 177 : 2019 : EDT 1 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
| ASTM E 136 : 2024 : REV C | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C |
| ASTM C 870 : 2024 | Standard Practice for Conditioning of Thermal Insulating Materials |
| ASTM C 168 : 2022 | Standard Terminology Relating to Thermal Insulation |
| ASTM E 136 : 2024 : REV A | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C |
| ASTM C 1617 : 2019 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
| ASTM C 1617 : 2024 | Standard Test Method for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Carbon Steel |
| ASTM C 1363 : 2024 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
| ASTM E 970 : 2017 | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
| ASTM C 518 : 1998 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.