ASTM C 672/C672M : 2012
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (Withdrawn 2021)
Hardcopy , PDF
10-02-2021
English
30-05-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 04.02, 2014 Describes the determination of the resistance to scaling of a horizontal concrete surface exposed to freezing-and-thawing cycles in the presence of deicing chemicals.
| Committee |
C 09
|
| DevelopmentNote |
Supersedes ASTM C 672. (06/2012)
|
| DocumentType |
Test Method
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Withdrawn
|
| Supersedes |
1.1 This test method covers the determination of the resistance to scaling of a horizontal concrete surface exposed to freezing-and-thawing cycles in the presence of deicing chemicals. It is intended for use in evaluating this surface resistance qualitatively by visual examination.
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ACI 365.1R : 2017 | REPORT ON SERVICE LIFE PREDICTION |
| AASHTO TP 96 : 2013 | METHOD OF TEST FOR PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ASTM C 884/C884M : 2016 : REDLINE | Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay |
| ASTM C 457/C457M : 2016 : REDLINE | Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete |
| ACI 233R : 2017 | GUIDE TO THE USE OF SLAG CEMENT IN CONCRETE AND MORTAR |
| ASTM C 928 : 2005 | Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs |
| ASTM C 884/C884M : 2016 | Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay |
| ASTM C 928/C928M : 2020 : REV A | Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs |
| ASTM C 457/C457M : 2016 | Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete |
| ASTM C 1709 : 2018 | Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete |
| ACI 237R : 2007 | SELF-CONSOLIDATING CONCRETE |
| ACI 362.1R : 2012 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF DURABLE CONCRETE PARKING STRUCTURES |
| ACI PRC-363.2 : 2011 | GUIDE TO QUALITY CONTROL AND ASSURANCE OF HIGH-STRENGTH CONCRETE |
| ACI 544.5R : 2010 | REPORT ON THE PHYSICAL PROPERTIES AND DURABILITY OF FIBER-REINFORCED CONCRETE |
| ACI PRC-506 : 2016 | GUIDE TO SHOTCRETE |
| ACI 364.3R : 2009 | GUIDE FOR CEMENTITIOUS REPAIR MATERIAL DATA SHEET |
| ACI ITG-8R : 2010 | REPORT ON PERFORMANCE-BASED REQUIREMENTS FOR CONCRETE |
| ASTM C 928/C928M : 2013 : REDLINE | Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs |
| ACI 330R : 2008 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF CONCRETE PARKING LOTS |
| AASHTO TP 96 : 2013 (R2018) | METHOD OF TEST FOR PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ACI PRC-548.3 : 2009 | REPORT ON POLYMER-MODIFIED CONCRETE |
| ACI 325.14R : 2017 | GUIDE FOR DESIGN AND PROPORTIONING OF CONCRETE MIXTURES FOR PAVEMENTS |
| ACI 345R : 2011 | GUIDE FOR CONCRETE HIGHWAY BRIDGE DECK CONSTRUCTION |
| ACI 363R : 2010 | REPORT ON HIGH-STRENGTH CONCRETE |
| CSA A3000 : 2013 | CEMENTITIOUS MATERIALS COMPENDIUM |
| CSA A23.1 A23.2 : 2014 | CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
| ACI 330.2R:2017(R2023) | Guide for the Design and Construction of Concrete Site Paving for Industrial and Trucking Facilities |
| ASTM C 192/C192M : 2016-04 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY |
| ASTM C 173/C173M : 2016 : REDLINE | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method |
| ASTM C 156 : 2017 : REDLINE | Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.