ASTM C 655 : 2019 : REV A
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
English
15-07-2019
01-08-2019
| Committee |
C 13
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers reinforced concrete pipe designed for specific D-loads and intended to be used for the conveyance of sewage, industrial wastes, and storm water and for the construction of culverts.
1.2This specification is the inch-pound companion to Specification C655M; therefore, no SI equivalents are presented in this specification. Reinforced concrete pipe that conform to the requirements of C655M are acceptable under this Specification C655 unless prohibited by the Owner.
Note 1:Experience has shown that the successful performance of this product depends upon the proper selection of the pipe strength, the type of bedding and backfill, the care that the installation conforms to the construction specifications, and provision for adequate inspection at the construction site. This specification does not include requirements for bedding, backfill, the relationship between field load conditions and the strength designation of pipe, or durability under unusual environmental conditions. These requirements should be included in the project specification.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 877 : 2021 | Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections |
| ASTM C 1885 : 2023 | Standard Specification for Circular Precast Concrete Culvert, Storm Drain, and Sewer Pipe for Pipe Jacking |
| ASTM C 1417 : 2019 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design |
| ASTM C 1846/C1846M : 2019 : R2024 | Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
| ASTM C 1840/C1840M : 2024 : REV A | Standard Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe |
| ASTM C 1924 : 2024 | Standard Practice for Design of Buried Precast Concrete Low-Head Pressure Pipe |
| ASTM C 361 : 2022 | Standard Specification for Reinforced Concrete Low-Head Pressure Pipe |
| ASTM C 1417M : 2019 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM A 615/A615M : 2020 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
| ASTM C 150/C150M : 2024 | Standard Specification for Portland Cement |
| ASTM C 443 : 2021 | Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets |
| ASTM C 822 : 2021 | Standard Terminology Relating to Concrete Pipe and Related Products |
| ASTM C 33/C33M : 2023 | Standard Specification for Concrete Aggregates |
| ASTM C 494/C494M : 2019 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM A 615/A615M : 2024 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
| ASTM C 494/C494M : 2019 : EDT 1 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM C 618 : 2025 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM C 33/C33M : 2018 | Standard Specification for Concrete Aggregates |
| ASTM C 1116/C1116M : 2010 : REV A : R2015 | Standard Specification for Fiber-Reinforced Concrete |
| ASTM C 618 : 2025 : REV A | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM A 706/A706M : 2022 | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
| ASTM C 1628 : 2017 | Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets |
| ASTM C 595/C595M : 2021 | Standard Specification for Blended Hydraulic Cements |
| ASTM C 497 : 2020 : EDT 1 | Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile |
| ASTM C 989/C989M : 2018 : REV A | Standard Specification for Slag Cement for Use in Concrete and Mortars |
| ASTM C 595/C595M : 2020 | Standard Specification for Blended Hydraulic Cements |
| ASTM A 615/A615M : 2022 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
| ASTM C 33/C33M : 2024 | Standard Specification for Concrete Aggregates |
| ASTM C 822 : 2020 | Standard Terminology Relating to Concrete Pipe and Related Products |
| ASTM E 105 : 2021 | Standard Guide for Probability Sampling of Materials |
| ASTM C 618 : 2023 : EDT 1 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM A 706/A706M : 2024 | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
| ASTM A 706/A706M : 2004 | Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement |
| ASTM C 1017/C1017M : 2013 : EDT 1 | Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete (Withdrawn 2022) |
| ASTM C 595/C595M : 2025 | Standard Specification for Blended Hydraulic Cements |
| ASTM C 150/C150M : 2021 | Standard Specification for Portland Cement |
| ASTM C 989/C989M : 2025 | Standard Specification for Slag Cement for Use in Concrete and Mortars |
| ASTM C 260/C260M : 2010 : REV A : R2016 | Standard Specification for Air-Entraining Admixtures for Concrete |
| ASTM C 33/C33M : 2024 : REV A | Standard Specification for Concrete Aggregates |
| ASTM C 618 : 2022 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM C 443 : 2020 | Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets |
| ASTM C 1602/C1602M : 2018 | Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete |
| ASTM C 1628 : 2006 | Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets |
| ASTM C 618 : 2023 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM A 1064/A1064M : 2018 : REV A | Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete |
| ASTM C 1628 : 2019 | Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets |
| ASTM C 1602/C1602M : 2022 | Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete |
| ASTM C 260/C260M : 2024 | Standard Specification for Air-Entraining Admixtures for Concrete |
| ASTM C 595/C595M : 2024 | Standard Specification for Blended Hydraulic Cements |
| ASTM C 595/C595M : 2023 | Standard Specification for Blended Hydraulic Cements |
| ASTM E 105 : 2016 | Standard Practice for Probability Sampling of Materials |
| ASTM C 494/C494M : 2010 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM C 989/C989M : 2024 | Standard Specification for Slag Cement for Use in Concrete and Mortars |
| ASTM C 1116/C1116M : 2023 | Standard Specification for Fiber-Reinforced Concrete |
| ASTM A 36/A36M : 2019 | Standard Specification for Carbon Structural Steel |
| ASTM C 618 : 2019 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM A 1064/A1064M : 2022 | Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete |
| ASTM C 990 : 2009 : R2019 | Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants |
| ASTM C 494/C494M : 2024 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM C 150/C150M : 2020 | Standard Specification for Portland Cement |
| ASTM C 989/C989M : 2022 | Standard Specification for Slag Cement for Use in Concrete and Mortars |
| ASTM C 497 : 1998 | Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile |
| ASTM C 150/C150M : 2022 | Standard Specification for Portland Cement |
| ASTM A 1064/A1064M : 2024 | Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete |
| ASTM C 1628 : 2019 : R2024 | Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets |
| ASTM C 443 : 2005 | Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets |
| ASTM A 706/A706M : 2016 | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
| ASTM A 706/A706M : 2022 : REV A | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.